Is your AGA T2 a juice hog or is it just mine?

[DaddyNoun]

Got my aga t2 a month or so ago. I dont take it out vaping because mine seems to vape juice REALLY fast. For example, I'll fill up the tank to about 3/4 of the way to the top. After about 20 or so minutes of vaping, its almost down to half. No chain vaping here either.

I've rebuilt it about 3 times already and keep getting the same performance. I've tried a hollow wick, tighter wicks, with no change.

Current setup: 400 ss mesh, bakero flat ribbon wire (wrapped around 4 times), 50/50 pg/vg juice, clocking in at about 1.1ohms, sitting on top of a k100 mechanical mod. I was previously using 30 gauge A-1 kanthal and was getting the same results. It's not spilling out into the top cap either.

Any recommendations, or is that just the nature of this atty?

 

[Draconian]

Something else has to be going on here. The atty will only vape what hits the coil - and any excess will feed back down into the tank (and stain your juice - it's normal). Somewhere - there is a leak - has to be. I have a few of these atomizers - and...no way do they have that issue normally.
Sometimes - the glass is rough on these - and it can leak from the o-ring.

 

[hafidz.rosly]

It is normal to genesis atty. I quit genesis for this reason ..

 

[El_tecolote]

My two seem to go through juice a little faster, but nothing too drastic. My RSST performs the same, so I think it's the nature of the beast.

 

[JimzDogz]

I went from dripping to an AGA T2+ with a SS wick. After a couple of days I noticed that I was using twice as much juice as before. I just figured that I was hitting it twice as often.

 

[res]

Mine seems to go through juice pretty quickly as well. I just assumed it comes with the territory of high vapor production

 

[eratikmind]

All of my RBA type delivery devices use more juice than when I was using clearomizers or my current daily go to cartotanks.

That's the price for better flavor production.




- Andy . . . Don't let the Ciggieman getcha . . . Vape'em.

 

[tj99959]

The bigger the cloud of vapor .. the more juice you used, it's as simple as that.

 

[Red_Bird]

Both my AGA+ and AGAT2 go thru ejuice fast, real fast.

I think theres some truth to SS mesh wick going thru it faster, I can only guess it gets much hotter then cotton or silica and holds the heat longer being that its SS.

 

[The Yeti]

One of the best reasons to DIY your own juice - you can't beat .05 cents a mil.