Issues w kanger

[Toby Green]

been vaping for awhile and recently the mod is not firing even thou the displays shows 0.5ohms.
i'm using kanger subox mini w rba head, tried swapping over to occ head but still not firing.
also will it be the cause of the problem if i screw the tank too much into the mod?

 

[ashtrayogdc]

Could be the mod. Do you have another mod to try it on?

 

[suprtrkr]

That mod is regulated, no real way to tell from your description. If it's reading the coil, the atty is connected and the coil not burnt. Bad fire button, maybe? Spilled some juice on it and it won't go all the way in?

 

[Toby Green]

Could be the mod. Do you have another mod to try it on?

just tried with another kanger mod and it fires, so i think it might be the 510 connection problem or something else? also when i take out the battery from the mod there is a funny burnt smell coming out from the mod.

 

[dhood]

the Subox Mini's mod (the Kbox mini) has a fixed 510 pin. It is not spring loaded. Not a good idea for those of us with multiple tanks. Most likely the pin is just pushed down a bit and isn't making contact. I don't know if you can use needle nosed pliers to pull it out a tad.

 

[Toby Green]

the Subox Mini's mod (the Kbox mini) has a fixed 510 pin. It is not spring loaded. Not a good idea for those of us with multiple tanks. Most likely the pin is just pushed down a bit and isn't making contact. I don't know if you can use needle nosed pliers to pull it out a tad.

tried pulling up abit and it makes contact but it still refuse to fire