Hi,
I am a long-time smoker who tried the 510-T last year for a couple months with little luck. I am once again trying to kick analogues and purchased an Ego-CC 650mAh and so far, I have not had one analogue since (it's been about a week or so).
This Ego-CC is very different from the 510-T I used and I am confused after pouring through the forums and was hoping I could ask the community for help.
I am pretty much overwhelmed with all the diff atty types for this device (e.g., A, B, LR), whether or not I need to do any maintenance other than cleaning/replacing the atty, etc. Here are the things that I am struggling with:
1. There doesn't seem to be a clear answer on the difference between type A and type B attys. I understand the Ego-CC can use either--does it matter which I use?
2. When do I know that I need to clear/replace the atty? I was turned off by all the 'maintenance work' with the 510-T, can I just run it through water and dry burn it between difference flavors? I am still unsure as to when it's better to replace it rather than just clean it.
3. The clearomizer: does it ever require replacing the metal tube with the glass level window? I am putting the juice in through the hole on top and that's nice and easy, but with my 510-T I had to replace the little rubber caps and the carts regularly. I am unclear on how this applies to the Ego-CC clearomizer.
4. Mixing 24mg and 12mg--would it work if I filled half the Ego-CC chamber with 24mg and half with 12mg and just shake it up? Or must I mix it before I put it into the ecig?
5. The battery is a Ego-C Upgrade: I have tried the 3.3V and the unregulated and I can tell that there is a difference, but I am not really sure what the difference is. Can someone help me understand what the difference is on using the two difference voltages?
I know there are a lot of questions here, I can't post on any of the other forums yet, and would appreciate any help.
Many thanks
I am a long-time smoker who tried the 510-T last year for a couple months with little luck. I am once again trying to kick analogues and purchased an Ego-CC 650mAh and so far, I have not had one analogue since (it's been about a week or so).
This Ego-CC is very different from the 510-T I used and I am confused after pouring through the forums and was hoping I could ask the community for help.
I am pretty much overwhelmed with all the diff atty types for this device (e.g., A, B, LR), whether or not I need to do any maintenance other than cleaning/replacing the atty, etc. Here are the things that I am struggling with:
1. There doesn't seem to be a clear answer on the difference between type A and type B attys. I understand the Ego-CC can use either--does it matter which I use?
2. When do I know that I need to clear/replace the atty? I was turned off by all the 'maintenance work' with the 510-T, can I just run it through water and dry burn it between difference flavors? I am still unsure as to when it's better to replace it rather than just clean it.
3. The clearomizer: does it ever require replacing the metal tube with the glass level window? I am putting the juice in through the hole on top and that's nice and easy, but with my 510-T I had to replace the little rubber caps and the carts regularly. I am unclear on how this applies to the Ego-CC clearomizer.
4. Mixing 24mg and 12mg--would it work if I filled half the Ego-CC chamber with 24mg and half with 12mg and just shake it up? Or must I mix it before I put it into the ecig?
5. The battery is a Ego-C Upgrade: I have tried the 3.3V and the unregulated and I can tell that there is a difference, but I am not really sure what the difference is. Can someone help me understand what the difference is on using the two difference voltages?
I know there are a lot of questions here, I can't post on any of the other forums yet, and would appreciate any help.
Many thanks
