It is but I would like it to be thin enough to be flush with the lip that is around the case. Like I said if the cheap stuff doesn't look good I will spend the extra cash for the good stuff. 2nd day, and so many fingerprints already.
- Status
It is but I would like it to be thin enough to be flush with the lip that is around the case. Like I said if the cheap stuff doesn't look good I will spend the extra cash for the good stuff. 2nd day, and so many fingerprints already.
I think Eric is planning on putting the carbon fiber on the PCC case which I think would be very nice.
I note that the real stuff has several different options regarding finish:
"Our .025" carbon fiber sheets are a tough, and rigid carbon reinforced epoxy matrix composed of two layers of 3k plain weave fabric without any core material. Each laminate is available in our standard gloss, scratch resistant matte, or textured finish on one side, with a textured finish on the other side, creating an ideal bonding surface. "
Eventually I may get some real stuff - but only after one of my pcc's goes dead, and then only if I can figure out how to swap the case between pccs so that I only need one with carbon fiber and can switch back and forth.
It is a good idea. Kind of make it look like a Billet Box.
I was going to cut and extra piece in the shape of a triangle, so I can feel where the opening is. My mitre saw works great at cutting straight linesTinsnips also work great for cutting
The vapor jackets are a shrink wrap, not a sticker so that wont work. But you can get sweet stickers at any arts and crafts store. Thats where i got the skull
It looks like the length of the tip doubles the size of the bottle. To much bigger than it needs to be ... for carrying around. For me anyway.
I'm using a 6ml bottle with a tip I found in a blood glucose meter kit. It's perfect and the original cap fits it. I've pretty much sidelined all my 3ml needle bottles for now.
I'm using a 6ml bottle with a tip I found in a blood glucose meter kit. It's perfect and the original cap fits it. I've pretty much sidelined all my 3ml needle bottles for now.
Junkman to replacing just the battery, looks like an option. The hardest thing looks like not damaging the charging pins. The battery might have some adhesive holding it as well.
Last edited:
THAT'S the right kind. The one shown above that post with the white cap has been reported to have problems with the Casio coming off in your pocket.
tap'd on my Google Galaxy Nexus
Wow. Too easy to get behind on this thread when "real life" happens! Unfortunately, it's still happening, so not sure how often I can pop in here. - Basically, .... hit the fan, I went back to mostly smoking the real stinkies simply because I never have any technical problems with a lighter and basic breathing. However, I realized there's no more $ in the budget, and I'm on my last pack, so back to the eRoll it is.
Going to throw out the apricot juice (for those following the never solved mystery of why it wouldn't mix.) Mixing (chocolate) in the tank makes it leak. Tested it out on a new tank, still leaks. Haven't re-tested that tank to see if it damaged the tank or... what.
Green felt stickies were much cheaper and a bit smaller at the hardware store (small town, not much selection) so I got those and put one where the arrow is on my PCC. Makes finding how to open it in the dark/while driving a million times easier. Highly recommended, whatever type of sticker/bump/whatnot you use!
Got some 95 VG, 5 PG juice and some 100 VG juice. Both were much too thick for my eRoll. If I let the 95/5 sit a while, it would hit OK for one or two drags. Then real tight, and that burned atty taste - since I'm still smoking cigs a lot right now, I noticed something. You know how us newbies are always asking about what juice tastes like a real cigarette? I think the answer is "burned atty" flavor. Seriously. I even too a drag off the cig, then off the eRoll when it wasn't getting juice - the taste isn't that far off!
Got VapeDudes juice this time. Asked them to put in 3x flavor in all. I can barely taste it. So yeah, my taste buds are weird. Food tastes "normal" - I dunno. But I can detect a little bit of flavor in these. Added just a few drops of DW to the 100% VG and it seems to be doing well. Not as much vapor as the other stuff I was using (70VG, 30 Distilled Water + whatever PG was in flavoring from Mt Baker) but it has a taste, so that's good.
Couldn't find any B&M store that would sell me a syringe yesterday. Luckily the animal rescue had one
I think I'll just a bunch through them/maybe a feed store/pet store. Much smaller than the one I bought... somewhere. Maybe Mt Baker? Desert Vapes? Don't remember.
Going to throw out the apricot juice (for those following the never solved mystery of why it wouldn't mix.) Mixing (chocolate) in the tank makes it leak. Tested it out on a new tank, still leaks. Haven't re-tested that tank to see if it damaged the tank or... what.
Green felt stickies were much cheaper and a bit smaller at the hardware store (small town, not much selection) so I got those and put one where the arrow is on my PCC. Makes finding how to open it in the dark/while driving a million times easier. Highly recommended, whatever type of sticker/bump/whatnot you use!
Got some 95 VG, 5 PG juice and some 100 VG juice. Both were much too thick for my eRoll. If I let the 95/5 sit a while, it would hit OK for one or two drags. Then real tight, and that burned atty taste - since I'm still smoking cigs a lot right now, I noticed something. You know how us newbies are always asking about what juice tastes like a real cigarette? I think the answer is "burned atty" flavor. Seriously. I even too a drag off the cig, then off the eRoll when it wasn't getting juice - the taste isn't that far off!
Got VapeDudes juice this time. Asked them to put in 3x flavor in all. I can barely taste it. So yeah, my taste buds are weird. Food tastes "normal" - I dunno. But I can detect a little bit of flavor in these. Added just a few drops of DW to the 100% VG and it seems to be doing well. Not as much vapor as the other stuff I was using (70VG, 30 Distilled Water + whatever PG was in flavoring from Mt Baker) but it has a taste, so that's good.
Couldn't find any B&M store that would sell me a syringe yesterday. Luckily the animal rescue had one
I think I'll just a bunch through them/maybe a feed store/pet store. Much smaller than the one I bought... somewhere. Maybe Mt Baker? Desert Vapes? Don't remember.
Just finally pulled the plastic cover off one of my Pccs, was impressed with how nice and shiny it was until I touched it. Wow talk about finger print magnet. looks like I may be checking into some carbon fiber myself
Junebug79:8847726 said:Wow. Too easy to get behind on this thread when "real life" happens! Unfortunately, it's still happening, so not sure how often I can pop in here. - Basically, .... hit the fan, I went back to mostly smoking the real stinkies simply because I never have any technical problems with a lighter and basic breathing. However, I realized there's no more $ in the budget, and I'm on my last pack, so back to the eRoll it is.
Going to throw out the apricot juice (for those following the never solved mystery of why it wouldn't mix.) Mixing (chocolate) in the tank makes it leak. Tested it out on a new tank, still leaks. Haven't re-tested that tank to see if it damaged the tank or... what.
Green felt stickies were much cheaper and a bit smaller at the hardware store (small town, not much selection) so I got those and put one where the arrow is on my PCC. Makes finding how to open it in the dark/while driving a million times easier. Highly recommended, whatever type of sticker/bump/whatnot you use!
Got some 95 VG, 5 PG juice and some 100 VG juice. Both were much too thick for my eRoll. If I let the 95/5 sit a while, it would hit OK for one or two drags. Then real tight, and that burned atty taste - since I'm still smoking cigs a lot right now, I noticed something. You know how us newbies are always asking about what juice tastes like a real cigarette? I think the answer is "burned atty" flavor. Seriously. I even too a drag off the cig, then off the eRoll when it wasn't getting juice - the taste isn't that far off!
Got VapeDudes juice this time. Asked them to put in 3x flavor in all. I can barely taste it. So yeah, my taste buds are weird. Food tastes "normal" - I dunno. But I can detect a little bit of flavor in these. Added just a few drops of DW to the 100% VG and it seems to be doing well. Not as much vapor as the other stuff I was using (70VG, 30 Distilled Water + whatever PG was in flavoring from Mt Baker) but it has a taste, so that's good.
Couldn't find any B&M store that would sell me a syringe yesterday. Luckily the animal rescue had one
Well sorry to hear if the problems and the need for the tobacco. Good to hear that you are determined to work around the problems you have had with the eroll.
I use 80pg 20vg and am having no problems with leaks or lack of flavor, fwiw.
I tried a little higher vg content but felt like it was too thick.
I think you are right about the burning atomizer flavor, lol
Last edited:
Wow. Too easy to get behind on this thread when "real life" happens! Unfortunately, it's still happening, so not sure how often I can pop in here. - Basically, .... hit the fan, I went back to mostly smoking the real stinkies simply because I never have any technical problems with a lighter and basic breathing. However, I realized there's no more $ in the budget, and I'm on my last pack, so back to the eRoll it is.
Going to throw out the apricot juice (for those following the never solved mystery of why it wouldn't mix.) Mixing (chocolate) in the tank makes it leak. Tested it out on a new tank, still leaks. Haven't re-tested that tank to see if it damaged the tank or... what.
Green felt stickies were much cheaper and a bit smaller at the hardware store (small town, not much selection) so I got those and put one where the arrow is on my PCC. Makes finding how to open it in the dark/while driving a million times easier. Highly recommended, whatever type of sticker/bump/whatnot you use!
Got some 95 VG, 5 PG juice and some 100 VG juice. Both were much too thick for my eRoll. If I let the 95/5 sit a while, it would hit OK for one or two drags. Then real tight, and that burned atty taste - since I'm still smoking cigs a lot right now, I noticed something. You know how us newbies are always asking about what juice tastes like a real cigarette? I think the answer is "burned atty" flavor. Seriously. I even too a drag off the cig, then off the eRoll when it wasn't getting juice - the taste isn't that far off!
Got VapeDudes juice this time. Asked them to put in 3x flavor in all. I can barely taste it. So yeah, my taste buds are weird. Food tastes "normal" - I dunno. But I can detect a little bit of flavor in these. Added just a few drops of DW to the 100% VG and it seems to be doing well. Not as much vapor as the other stuff I was using (70VG, 30 Distilled Water + whatever PG was in flavoring from Mt Baker) but it has a taste, so that's good.
Couldn't find any B&M store that would sell me a syringe yesterday. Luckily the animal rescue had one
If you still smoke, or are in the process of quitting, even for a few months after having your last cig, your taste buds are garbage. Youll get a lot more flavor once you are good and clean and your sense of smell and taste return
If you want to use 100% VG in your Eroll, just add a little distilled water to the eliquid to thin it out, it works just fine that way
Also, really high vg gives me a lot less flavor. I've been using mostly 50/50, but I just got some 80pg/20vg in the mail, and the flavors are so much stronger. Same exact juice. I'm using it now in the eRoll, and no leaks, even though it's really thin.
Junebug, what flavors are you vaping? Why so high on the VG? Does PG cause problems for you?
Question... How long did it take to charge your pcc fully when you first got it?
I just got my eRoll today and have had my pcc charging for what feels like forever and still not fully charged (no green light).
I am excited to get this going!!!!
I just got my eRoll today and have had my pcc charging for what feels like forever and still not fully charged (no green light).
I am excited to get this going!!!!
Hi, I'm looking to purchase an eRoll, and I was wondering if it would be compatible with these atomizers:
http://goo.gl/gVdN5
Thanks very much in advance to anybody who can answer this question for me!
http://goo.gl/gVdN5
Thanks very much in advance to anybody who can answer this question for me!
Last edited:
- Status
Similar threads
