JOYETECH ERoll

[EricDykstra]

the Altoids small holds 5 tanks snugly. They don't rattle in your pocket like a pack of tick tacs, if you know what I mean. Had an issue with 3 tanks tonight. They leaked into the top part of the tank. No real issue, just strange. I don't think it had anything to do with me having a nic fit and sucking to hard after tasting 300+ wines and then 5 bottles of wine at dinner. Im sure that had nothing to do with it

 

[Pure Guava]

Sweet!

Thanks for clearing that up for me. Looks like I'm putting an order in for an eRoll.

I recommend Rocky Mountain Vapor. Fast service and good customer support.

 

[TennDave]

To answer the questions posed above about the NJOY- I vape 3.6mg anyway...no it did not give me a huge head rush but I did feel it's effects.

 

[unloaded]

Flavors - mostly the fruity ones and the desert ones. Right now it's supposed to be Mocha Malt. Tastes a little like the Hazelnut to me.

Long story short - no (or as little as possible) PG 'cause I'm a bit "creatively arranged in the head" and I just can't bring myself to use it. (I've been avoiding it in products for years. Yes, I'm logically aware of the ridiculousness of this. However, the crazy wins on this one.)

I was going to suggest some Halo juice to you, Torque56 and Freedom are very cig-like when vaped. It's not just the flavor, somehow they feel more like a cig than most juices. They are on the higher side of PG content with no options to change the mix. If you can get past that you can probably get away from the cigs.

 

[chicio]

We ordered a second eRoll kit and it came today. Wow! Brand new attys! What a difference. I can't get my to taste this great after cleaning and did the remove the spike part and all that. It's not bad or anything but new is new and yum lol 5 for $20 is worth that taste. Ordering tons more now. Anyway, still loving this thing.

I have been loving my eroll. Have had it for awhile, mine leaks every time I fill it. I vape Johnsons creek smoke juice and you get a free needle tip bottle with every order which is perfect for filling the eroll. Also, I buy my attys from aquavapor.com. They arent genuine joyetech attys but they are only 12 bucks for a 5 pack and use coupon code switch for 10 percent off. I order 5 packs at a time for 50 bucks shipped to me. They come in eith 1.6 volts or 2.0 volts. They do sell the genuine joyetch ones for 18 bucks a 5 pack. I have not seen anything cheaper anywhere else. My only issue is the constant leaking after I fill it up its always leaking out the sides and the batteries dont last long and sometimes I get bad batteries when I order, they dont stay lit when I take a pull, you have to really give a hard draw to keep in constantly on. I order by carts and xtra batts off dragonfly e cigs. Cones are like 3 bucks each and carts are 3 bucks a 5 pack and extra batts are only 8 bucks a piece. I vape Island flavor Johnsons Creek, give it a try its the best juice out there. I have always had an issue with smoke juice, I could never find the right brand or flavor. Great throat hit and lots of vapor production. I hope I can help someone out with this info. I hate the big batts, the eroll is perfect. I know people rip it because it is only 90 mah but it takes 15-20 minutes to charge and even if I chain vape the battery lasts until the other is charging. Those big 1000 mah batteries are not for me, I dont want to smoke a dildo.

 

[chicio]

I was going to suggest some Halo juice to you, Torque56 and Freedom are very cig-like when vaped. It's not just the flavor, somehow they feel more like a cig than most juices. They are on the higher side of PG content with no options to change the mix. If you can get past that you can probably get away from the cigs.

Johnsons creek makes awesome juice PG free, try the red oak line. I vape Island flavor, it is a fruity flavor and it is the only smoke juice I found to have worked for me. Even other companies fruity flavors taste funny. Island flavor is delicious and if you have an eroll all their juice comes in glass bottles with a free needle tip plastic bottle which is perfect for filling the eroll. Glass bottles come with a dropper so you can easily transfer the liquid to the plastic bottle.

 

[Bookworm]

I have been loving my eroll. Have had it for awhile, mine leaks every time I fill it. I vape Johnsons creek smoke juice and you get a free needle tip bottle with every order which is perfect for filling the eroll. Also, I buy my attys from aquavapor.com. They arent genuine joyetech attys but they are only 12 bucks for a 5 pack and use coupon code switch for 10 percent off. I order 5 packs at a time for 50 bucks shipped to me. They come in eith 1.6 volts or 2.0 volts. They do sell the genuine joyetch ones for 18 bucks a 5 pack. I have not seen anything cheaper anywhere else. My only issue is the constant leaking after I fill it up its always leaking out the sides and the batteries dont last long and sometimes I get bad batteries when I order, they dont stay lit when I take a pull, you have to really give a hard draw to keep in constantly on. I order by carts and xtra batts off dragonfly e cigs. Cones are like 3 bucks each and carts are 3 bucks a 5 pack and extra batts are only 8 bucks a piece. I vape Island flavor Johnsons Creek, give it a try its the best juice out there. I have always had an issue with smoke juice, I could never find the right brand or flavor. Great throat hit and lots of vapor production. I hope I can help someone out with this info. I hate the big batts, the eroll is perfect. I know people rip it because it is only 90 mah but it takes 15-20 minutes to charge and even if I chain vape the battery lasts until the other is charging. Those big 1000 mah batteries are not for me, I dont want to smoke a dildo.

Some people have said the generic attys cause leaks. Try the real joyetech ones and see if it makes a difference.

 

[DSFA]

At first I really liked the eRoll. Now, I'm not so sure. I'm missing the TH that I used to have. I've only had it for a week and maybe it's a juice issue, but when I first got it, it seemed to satisfy me. Now, not so much. I hope it's just a juice issue. I thought about trying the lr attys but was reading that they don't seem to make much of a difference. On another note, I changed my atty this morning thinking that might help. While it didn't make a difference, the new one is "crackling" whereas the other one didn't. Normal? I'm kind of new to all of this. As for the TH, maybe I'm just getting spoiled with my twist.

 

[DC2]

As for the TH, maybe I'm just getting spoiled with my twist.

What voltage do you generally run your Twist at?

 

[DSFA]

I'm using my twist based on recommendations made by a guy in a B&M as I literally had no idea what I was doing. Since I'm using vivi nova clearos, he said to adjust the voltage based on the head that is in there. Right now I've got a 2.8 and I'm running the voltage at 4.4. He said with a 2.8 I could max it out to 4.8 but when I tried that, the hits were really harsh. Good hit, but really harsh so I backed it down until I found a nice spot.

The only way I can get any kind of "hit" sensation out of the eroll now is to use a strong menthol juice. Otherwise, it's like air when I hit it, but I am getting good vape as evidenced by the exhale. Still curious about the crackling of the atty I installed this morning. Like I said, the other one didn't do that. These are the two that came with the kit.

 

[Bookworm]

I'm using my twist based on recommendations made by a guy in a B&M as I literally had no idea what I was doing. Since I'm using vivi nova clearos, he said to adjust the voltage based on the head that is in there. Right now I've got a 2.8 and I'm running the voltage at 4.4. He said with a 2.8 I could max it out to 4.8 but when I tried that, the hits were really harsh. Good hit, but really harsh so I backed it down until I found a nice spot.

The only way I can get any kind of "hit" sensation out of the eroll now is to use a strong menthol juice. Otherwise, it's like air when I hit it, but I am getting good vape as evidenced by the exhale. Still curious about the crackling of the atty I installed this morning. Like I said, the other one didn't do that. These are the two that came with the kit.

Some of my attys crackle, some don't. All joyetech. They all seem to perform the same, which is very well. I also get great throat hit from my eRoll, but my juice has a pretty good throat hit at 18mg.

 

[EricDykstra]

No more fingerprints!!!

 

[DC2]

No more fingerprints!!!

Very nice!

 

[p-doze]

still on the original atomizer from a month ago...just took 2 pulls. one tasted fine, the second tasted like burnt doo doo, plenty of liquid left. replace atomizer? (if i was at home, i would have just replaced it, but since i'm at work, i figured i'd ask the experts)

 

[Pepo]

At first I really liked the eRoll. Now, I'm not so sure. I'm missing the TH that I used to have. I've only had it for a week and maybe it's a juice issue, but when I first got it, it seemed to satisfy me. Now, not so much. I hope it's just a juice issue. I thought about trying the lr attys but was reading that they don't seem to make much of a difference. On another note, I changed my atty this morning thinking that might help. While it didn't make a difference, the new one is "crackling" whereas the other one didn't. Normal? I'm kind of new to all of this. As for the TH, maybe I'm just getting spoiled with my twist.

I think changing to ss mesh wick is the only way to improve the TH with eroll.

 

[DC2]

still on the original atomizer from a month ago...just took 2 pulls. one tasted fine, the second tasted like burnt doo doo, plenty of liquid left. replace atomizer? (if i was at home, i would have just replaced it, but since i'm at work, i figured i'd ask the experts)

If the wick is burnt, you can replace it.
If the atomizer is gunked up, then it should be dry-burned clean.

 

[DSFA]

I think changing to ss mesh wick is the only way to improve the TH with eroll.

Now if I was only handy enough to do that, life I would be grand! Don't suppose anyone makes a ss mesh version do they? I'm more of a "I'll pay a little more rather than muck it up" kinda guy. Not a big DIYer here

 

[junkman]

No more fingerprints!!!

View attachment 185530

View attachment 185532

Looks nice!

Couple questions -

1) is that the amazon CF?

2) How did you cut it to fit? The curves are worrying me

3) How was the thickness - did it stay beneath the lip on the case?

4) What are you using for the arrow?

Couple more than a couple I guess...

 

[EricDykstra]

It is amazon carbon fiber. 2 pieces 4" x 8" Sample Size 3D Twill Weave Glossy Black Carbon Fiber Vinyl Sheet : Amazon.com : Automotive

I traced the out line with a pencil. Cut out the out line with scissors .That made the material just a little larger than the case. I stuck the Carbon Fiber and let it sit.Then I used a utility knife razor blade to trim the excess flush with the case.I put the razor on a 45 degree angle using it as a scraper, and scrapped the edge of the carbon fiber. I finished up by using super fine sandpaper to round the corners of the Carbon fiber.

It is a fuzz thicker that the lip, but not by much. Did seem to matter, I covered up the lip anyway

The arrow is just another piece of Carbon Fiber that I painted with epoxy paint....we will see how it holds up.

 

[Bookworm]

Looks awesome Eric!

On a different note, I just did my first successful dry burn to salvage the first couple of attys I used. Wicks look clean after a hot water bath, but eventually I'll have to learn to re-wick these too.