I usually give this thing a shake to get the liquid to go from top to bottom sometimes. If i have an air bubble in the bottom it will burn(cooks out in a few puffs though). Its nothing major, i tend to shake it to check the levels frequently. Unlike my other autos this one does not cook when you shake it which is nice. My kr808s light right up if i shake them.
- Status
I'm finding I have to be careful when I put the eRoll in the PCC- if I don't get it in right, the blue light doesn't come on and it doesn't charge. Later I think it's ready (no light on) and it isn't ready at all. 
I just rinsed all 3 of my atomizers out in hot water, pushed some air through them and warmed them up with a hairdryer. Installed one of the standard resistance atomizers and I still have low vapor production. The LR has plenty of vapor but still tasted burnt. Looks like I have to place an order for atomizers.
I was going to suggest this i saw a few pages back, but i put in an order and with shipping it was 36 lol, my bad. Ill pass on that
eGo-C A type atomizer head (pack of 5)
Last edited:
I just tried to place an order there. Shipping was more than the products I was ordering.
I'm finding I have to be careful when I put the eRoll in the PCC- if I don't get it in right, the blue light doesn't come on and it doesn't charge. Later I think it's ready (no light on) and it isn't ready at all.
I just noticed this happening today, wiped the connectors with a damp q-tip, and seems to be working fine now. I think I got a little beer on it last night. Oy.
Yeah i was repeating someone elses suggestion, figured id grab some, and edited my post to say that. No wonder their price is so cheap lol
I took the post out of the atty and the wick out of the atty that wasn't firing. Tested continuity and somehow it is still good- I don't have any mesh but do have silica rope so will try re-wicking it.
Volume Control you are so right!!! I did the same thing tonight! I did not know East Mall was in Shenzhen, China!!! I have edited my previous quote that I had posted a few pages earlier!
Eastmall is one of - if not THE first ecig China shop from the beginning of ecigs. I bought my very first ones from them in 2008.
Shipping used to be dirt cheap from China. Unfortunately having to deal with the thousands of tickets and complaints from customers because - China Mail was slow (NO, no, no American newbies and country folks, you CANNOT have your ecigs in 2 days door to door with $4 China mail!!!!) - they and Health Cabin slowly moved over to EMS and DHL only. A big disappointment to Australians, Europeans and the rest of the world who all used to buy hardware from China. Sigh....
My little new year's rant lol...
Well the silica wick I have is the perfect size. Now I know I can pull that old wick out and dry burn if necessary. I don't think blowing through the air hole is such a good idea. I connected up a 3.7V battery with leads to the brass looking plate at the bottom of the atty and to the side (+ and - I assume) and that worked fine. Next, after taking out the stem cap to the atty (it just pops out), I noticed something was still clogging up the hole a little in the post....it is a very fine wire mesh. I pushed it through and out of the way. Then after applying a little VG/Nic juice to the wick I was able to push it through the hole from the top with a little twisting motion. I cut it off then pretty even with the slanted opening of the post but when I tried to vape it with a tank on, nothing happened. I could feel the atty getting hot so it just wasn't getting enough juice. I took a toothpick and pushed the wick just a hair further into the post and now it vapes like it did new!!
when my atty's arent quite up to my standards, I pry the wick post out and dry burn the coils with my manual battery set up (ego c or ecab)..easiest, fasted dry burn ever. The burnt taste is most likely caused by a charred wick. Hot water solves most of the problem..you can trim off the tips if you need to. After I clean up the wick three or four times I replace it with the imist wick..cutting it level with the inside of the lower "bump". I place a drop of liquid directly on the coil and on the wick before the thing is back to go.
also..sorry for the repitition,,,open the "slots" on the side of the tank periodically. It seems like the heat of the atty cone can cause them to collapse slightly, affecting the flow of liquid through the tank
I end up dry burning once or twice a week, but this is now my primary devise.
For over three years now, when I order from China I go with Heaven Gifts.
Orders arrive quickly, great prices, and never had anything arrive DOA so far.
I just ordered 10 of the 5 pack atties from East Mall. Shipping was $17, so it was still quite a bargain. I think it might have been discounted because I hit the $100 mark.
$117 totally beats $200 if you don't mind buying in bulk
$117 totally beats $200 if you don't mind buying in bulk
I just got my eroll today and all I can say is WOW! I fell in love at first sight, even before the first puff. The PCC is tiny, I didn't realize how small it would be, looking a photos just doesn't give a true sense of scale. I loaded some DnD blackberry in the tank and was amazed at the amount of flavor and vapor. While it won't replace my main kit it does make an excellent back-up that is easy to pack and carries all too well in the pocket. My standard Friday order will contain many new attys and a few extra tanks. I was going to buy one ucan but now I'm buying two just to dedicate one to the eroll. I'm really excited over the possibilities this little device offers, I can't wait to show it off to my friends that still smoke.
LOL, that is the first juice I put in my eroll. Thats pretty amazing. 12mg and my first thought was how good the throat hit was. Didnt expect much but TH wise it over exceeded my expectations. I actually dont like that juice though. Vaping my way through the bottle. Not good enough to re-order but not bad enough to toss out.
My E-roll finally spoke to me.. had it with me for about 10 days, and though the VTF was moderate in the beginning, I still stuck to it on and off, coz of it's form factor...and today I think the attys finally broke in...coz I am totally blown away by the flavor and vapor quantity, and also the atty section is getting hotter than before, which actually means that these 90mah batts can really work those attys...one can simply never imagine how much this tiny stick can deliver in terms of VTF till they try it themselves.
Filling up the carts are easy too, don't have a U can, but I drip into the hole without taking off the cap, Thanks to DC2 his method of filling the carts by dripping the juice to the side of the hole instead of aiming for the center works every time, which also makes filling these with any flavor I want from any kind of bottle just as easy..
Filling up the carts are easy too, don't have a U can, but I drip into the hole without taking off the cap, Thanks to DC2
his method of filling the carts by dripping the juice to the side of the hole instead of aiming for the center works every time, which also makes filling these with any flavor I want from any kind of bottle just as easy..Yeah, you just touch the drop to the side of the hole and it gets sucked right in.Filling up the carts are easy too, don't have a U can, but I drip into the hole without taking off the cap, Thanks to DC2
No muss, no fuss, any flavor, any time!
Who would have thunk it?
- Status
Similar threads
