JOYETECH ERoll

Status
Not open for further replies.

unloaded

Ultra Member
ECF Veteran
Verified Member
Jun 2, 2011
2,491
2,365
SW. Indiana
Well I got tired of my COV plastic needle bottle. I don't want to worry about the little cap coming off. I've been thinking of trying this for a while just haven't got around to it. The bottle was a freebie picked up local shop, it had RAWR 0 nic juice in it, StrawberryColada I think. A customer left it for anybody who wanted it. I took it for the bottle, longer cap and tip than others I'd seen. I trimmed the tip of a small Halo bottle and cut a 16ga needle to about 1/2" and pressed it in. It's long enough to work with the eRoll tank and not cause an airlock. The cap fits on, it's pocket friendly and childproof. Somebody should produce bottles like this, a little longer on the needle would be even better.

I can get through a whole day with this (40mg juice).
image.jpg

Under the hood.
image.jpg

Here is the taller cap needed.
image.jpg
 

volume control

Ultra Member
ECF Veteran
Verified Member
Nov 2, 2012
2,011
1,348
Mass
Would you feel comfortable carrying it in your pocket?



I dont like to carry bulky stuff in my pockets. If i dont have my backpack with me i tend to just carry either my eroll/pcc or my ego c. If im carry my bag i throw them in my bag they seem fine now. I just make sure they are going to lay on their side, and i dont leave them sitting in one spot for days haha

The ego C will last me half a day easily with 1 fill. The eroll lasts about 3-4 hours on a fill. I really dont go through a ton of liquid =)
 

four2109

Ultra Member
ECF Veteran
Verified Member
May 9, 2009
2,995
1,787
S. Indiana
Unloaded, Glad to see you finally tried this. I wouldn't pay for them though. They are just too easy to make.
I just use them on my 3mls, because I have larger small tip bottles for use at home.
Halo seems to come with a variety of tips. I have some that work as they are, and some that don't.

I also found some great tips on a bottle of test liquid for a glucose meter I have. The tip and cap both fit the 6ml bottles I have.
 

four2109

Ultra Member
ECF Veteran
Verified Member
May 9, 2009
2,995
1,787
S. Indiana
Btw a 5 pack of atomizers i got from MFS has some nasty primer in it. I tried rinsing it out and its still awful.

Also i picked up another chrome batt. This one if i cover the hole at the tip and inhale, still activates. None of my others or any ive heard of have been like that.
The atomizers I got from Vaporbank had it too. Yellow brown stuff in the tray, but it flushed out OK in a syringe with hot water.
 

TennDave

Vaping Master
ECF Veteran
Verified Member
Dec 19, 2010
9,988
8,034
65
Knoxville, TN
Report: Just returned from Tokyo where my main vape was the eRoll.
Gave an eRoll kit to a friend of mine- I hope he uses it...set him up with an extra sleeve and e-juice at 3.6%- he's a heavy smoker but wants to quit and has tried just about everything.

My eRolls performed flawlessly and I vaped without issue even in districts of Tokyo where smoking is not allowed on the streets. I saw no other vapors- sort of a let-down and very few seemed to know what an e-cig was.

My Ucan also performed flawlessly- no leaks what-so-ever, even with the pressure changes in the airplane. I know there has been discussions about keeping one in your pocket. I did. I vaped in my seat (holding in the vapor and hand over the blue light) as well as the bathroom without any issues- no one knew I was using it. At one point on my trip over (United), just for kicks I asked an attendant what United's position was on e-cigs and was told that they were against them and would confiscate them if they caught anyone using them. I was not obnoxious- and was very careful, but all I can say is, it can be done!! Even in our country with all the bans, how is anyone going to know if you use your e-cig carefully- no one will know so there is no way to enforce this.

Over-all a very pleasant trip and I vaped my heart's content!!
 

unloaded

Ultra Member
ECF Veteran
Verified Member
Jun 2, 2011
2,491
2,365
SW. Indiana
I was cleaning out my tank today and while I had it apart an idea struck. Looking at the size of the holes in the mouthpiece and the baffle I thought they might be part of the cause of the tight draw. I took a 1/16" drill bit and made then bigger, next I took a 5/64" and made them even bigger still. This was about as big as I could go and still keep the little nipples intact. Put it all back together filled her up and had a go at it. The draw is airier but not a whole lot. The vapor seems a little more along with flavor. The throat hit dropped though. I guess it like lining up the air hole on a Genisis atty. Right now I'd say the airholes on the battery are causing what restriction there is left. Next one I'm gonna stop at 1/16" to try for a balance with the TH. Give it a try, it's easy to do, just used my fingers to hold the drill bits.
 

DC2

Tootie Puffer
ECF Veteran
Verified Member
Jun 21, 2009
24,161
40,974
San Diego
got my eRoll today so far so good.Very nice looking unit. Vapor is better than a blu, but that could be just the juice. I ordered some Johnsoncreeksmoke so I can compare just the hardware to the blu.
Don't be so sure you will get a fair comparison that way...
We really have no idea what they make for Blu because it seems to be made to custom specifications.
 
Status
Not open for further replies.

Users who are viewing this thread