JOYETECH ERoll

[DJ RyckRak]

Sorry!
Anyone knows how to delete that thread? How to ask the 'admin' to rename it.

I don't think Qorax did anything wrong.
What he said is true...this thread is way to long for anyone to go through,
With a lot of blah..blah..blah in the beginning.
The eRoll has been out for a few months now, the thread has grown up and it is time it got it's own mod section.
It is not a 510.
So how about it admins...?

 

[EricDykstra]

Leaking from the bottom of the cone where it joins the battery....PCC has 2 small notches down one side......Liquid is a 70/30 PG/VG

Well that's a good start, the case is right. The liquid should work, what brand is it? Have you tried another tank and Atomizer?

Also make sure there is an air bubble at the opening of the tank when you install it. If there is liquid at the opening when you install the tank some liquid will leak out when the spike enters the tank. Just make that air bubble goes to the other end before you vape. Burning wicks taste terrible.

Have you burn the wick with no liquid? (You will know by that horrible taste)

You also should clean the cone between tanks. Also make sure you clean the connection in the battery. With the leaking i am sure there is fluid under the atomizer.

How much liquid are we talking about?

 

[EricDykstra]

I don't think Qorax did anything wrong.
What he said is true...this thread is way to long for anyone to go through,
With a lot of blah..blah..blah in the beginning.
The eRoll has been out for a few months now, the thread has grown up and it is time it got it's own mod section.
It is not a 510.
So how about it admins...?

This is just an fyi in case people did not know this, you can search just this thread with "search thread" at the top of the thread on every page.

I don't think anyone faults Qoraz. He is right that this thread is too long. He did post a lot of information stuff on the other thread.

The problem is the next thread will get too long just as quick, then what?

 

[four2109]

I think the other thread should be renamed "Eroll Cliff Notes".
Use it to to repost pertinant information and solutions like Erik just posted. I know what's in this thread, but wouldn't bother looking for something specific. We would still have 1 thread to follow and the other to refer people to.

And yeah, the Eroll and the King should both have their own "device specific" areas.

 

[The Wolds]

Well that's a good start, the case is right. The liquid should work, what brand is it? Have you tried another tank and Atomizer?

Also make sure there is an air bubble at the opening of the tank when you install it. If there is liquid at the opening when you install the tank some liquid will leak out when the spike enters the tank. Just make that air bubble goes to the other end before you vape. Burning wicks taste terrible.

Have you burn the wick with no liquid? (You will know by that horrible taste)

You also should clean the cone between tanks. Also make sure you clean the connection in the battery. With the leaking i am sure there is fluid under the atomizer.

How much liquid are we talking about?

Good idea....I will try a new tank

About 3/4 of a tank leaked..... feeling it on my fingers thats how I knew something was wrong

I'm not getting any dry burns at all......

Will check the battery for liquid

The juice was FA (UK)Golden Rollie concentrate and I made it myself at 18mg 70/30 PG-VG
Same juice since I got it 3 days ago so I would not have thought it was that

Thanks for your help Eric on this....I'm grateful

 

[Bookworm]

This thread is long, but it was extremely helpful to me. The sub-forums need to be revamped, IMO. It's not just the eRoll, but several devices that don't fit into those categories.

 

[EricDykstra]

Good idea....I will try a new tank

About 3/4 of a tank leaked..... feeling it on my fingers thats how I knew something was wrong

I'm not getting any dry burns at all......

Will check the battery for liquid

The juice was FA (UK)Golden Rollie concentrate and I made it myself at 18mg 70/30 PG-VG
Same juice since I got it 3 days ago so I would not have thought it was that

Thanks for your help Eric on this....I'm grateful

I get that with feel on my fingers with certain juices. I think it has to do with viscosity. The whole gravity feed, wicking properties.If they are to thick or to thin it can be a problem. I try to shoot for an 80/20 blend, but different vendors it still varies. Maybe another member can shed some more light. My solution to use up those juices was Vaseline on the sides of the atty. Works, but you have to watch the air side of the tank. With the cone seal tight, liquid will find its way into the air side of the tank and can eventually end up in your mouth. My other option is to wipe the whole thing out after every tank.

 

[junkman]

Yeah, I tried to start some eRoll threads a while back on specific issues - hoping to get a forum. They just deleted one and I think a couple others are out there still. I don't like the beginning of this thread at all and it is very long.

However, if people are smart enough to skip to the end then they will get some good company and good info too.

 

[mecocina]

You do know that it shipped with a clear protective film that scuffs much more easily than the actual plastic underneath? Many folks have been rewarded with a "new" looking PCC after discovering and removing this from their scratched up new toy.


tap'd on my Google Galaxy Nexus

I read that earlier and I found the one on the front but not the bottom. Just checked....hahaha....so there is one on the bottom LOL. Well it's brand new looking again and want to keep it that way so I put the decorative skin back on.

 

[EricDykstra]

Yeah, I tried to start some eRoll threads a while back on specific issues - hoping to get a forum. They just deleted one and I think a couple others are out there still. I don't like the beginning of this thread at all and it is very long.

However, if people are smart enough to skip to the end then they will get some good company and good info too.

Great I just posted an new thread.....there is 2 minutes ill never get back

 

[unloaded]

If you have leaking issues also check how tight the spike fits in the tanks. If its kinda loose try a different spike. I had this trouble with some knockoff attys. it's possible a few of the Joye attys are out of spec too.

 

[Tober138]

If you have leaking issues also check how tight the spike fits in the tanks. If its kinda loose try a different spike. I had this trouble with some knockoff attys. it's possible a few of the Joye attys are out of spec too.

Or try another tank if it has just happened with one. The hole in the tank may simply be off or a hair too big.

 

[qorax]

I don't think Qorax did anything wrong.
What he said is true...this thread is way to long for anyone to go through,
With a lot of blah..blah..blah in the beginning.
The eRoll has been out for a few months now, the thread has grown up and it is time it got it's own mod section.
It is not a 510.
So how about it admins...?

Thanx.
I've nonetheless requested* the Forum Manager to 'rename' that thread.
____________________________________________________________
*via the 'Contact Us' page.

 

[propagandax]

This is ......ed. First the NJOY King thread got moved to the 808 section, now the Eroll thread is under the 510 thread. Maybe I should report this post?

MODS, PLEASE HELP! .

http://www.e-cigarette-forum.com/fo...being-moved-wrong-subsection.html#post9085298

 

[JuniorNA]

I don't think Qorax did anything wrong.
What he said is true...this thread is way to long for anyone to go through,
With a lot of blah..blah..blah in the beginning.
The eRoll has been out for a few months now, the thread has grown up and it is time it got it's own mod section.
It is not a 510.
So how about it admins...?

Yea qorax did nothing wrong - what the hell was that about.??? Part 2 is the best idea yet because after sifting through 50 useless pages and realizing there is no hope....

Now the new eroll user can look forward to a part 2 with even more useless junk . But they will see the light at the end of the tunnel

 

[propagandax]

You do know that it shipped with a clear protective film that scuffs much more easily than the actual plastic underneath? Many folks have been rewarded with a "new" looking PCC after discovering and removing this from their scratched up new toy.


tap'd on my Google Galaxy Nexus

What!!!!!I had no idea my PCC was starting to look real funky. Thanks for helping the handicapped

 

[unloaded]

What!!!!!I had no idea my PCC was starting to look real funky. Thanks for helping the handicapped

Don't feel bad, I had mine for about a month before I noticed too.

 

[mommyofdoom]

Whoa... they hid this in HERE?

I was wondering where this thread went.

 

[TennDave]

I hear of leaks and batteries getting gunky and no longer working - I've had no issue at all except a PCC dying. I never clean anything except a push of a Kleenex end down into the battery connection area if I see it excessively glistening. I use 100% VG niquid.

 

[izaidi]

I hear of leaks and batteries getting gunky and no longer working - I've had no issue at all except a PCC dying. I never clean anything except a push of a Kleenex end down into the battery connection area if I see it excessively glistening. I use 100% VG niquid.

You use 100% VG with your eRoll? I thought 100% VG was too thick for the eRoll. Do you thin it at all? No problems at all?

Otherwise, if you really are using 100% VG with your eRoll what kind of throat hit are you getting? What nic level do you use?