- Status
I have some posts about these. Never found the needle tip but US vendor caterpillarvapes sells the liquid. The tips are small enough for the carts, but they are very stiff bottles, make sure you get a larger size than 10ml
Can the tips be switched out to other typical juice bottles?
Cignot.com has 18 ml bottles with a plastic needle-nose tip (pack of 2 for $2):
https://www.cignot.com/product_p/msc-drp-bot.htm
Picked these up last week and they are working well for refilling my eRoll cartridges.
https://www.cignot.com/product_p/msc-drp-bot.htm
Picked these up last week and they are working well for refilling my eRoll cartridges.
While this isn't to me... several of my juices are 100% VG (Naturals from VapeDudes) - I add 10% distilled water when they get here. 99% of the time those juices have no problems for me. I use 24 mg. Not good at describing THs tho.
Also -
1) - I get blunt needle tips to screw on my liquid bottles. They've fit all bottles i've tried. It's a bit of a PITA, but they work, they fill well, and I haven't had them leak.
2) I do not understand why - charged up the chrome/silver eRoll I got so that I'd have two clearly different ones for this weekend's trip. It worked fine at first, then was a real tight drag/burned atty taste. Let it sit a while, got a decent drag or two, same thing again - so I guess it's a feeding problem. Haven't had the time to take it apart and look at it - but man - this is stuff is really frustrating. Do I remember reading correctly that people who switch to the SS mesh never have this sort of problem?
1) - I get blunt needle tips to screw on my liquid bottles. They've fit all bottles i've tried. It's a bit of a PITA, but they work, they fill well, and I haven't had them leak.
2) I do not understand why - charged up the chrome/silver eRoll I got so that I'd have two clearly different ones for this weekend's trip. It worked fine at first, then was a real tight drag/burned atty taste. Let it sit a while, got a decent drag or two, same thing again - so I guess it's a feeding problem. Haven't had the time to take it apart and look at it - but man - this is stuff is really frustrating. Do I remember reading correctly that people who switch to the SS mesh never have this sort of problem?
This happened to me a couple of times. Once was due to a slight lose connection betwen the body of the atomizer and the battery (the cilinder you have to lock in the battery was not perfectly adjusted). The other time was because the tank was not completly pushed into the body of the atomizer. Hope this can help......
I use these. The tops are standard threads.
Easy Fill Bottles | Empty Bottles and DIY Supplies | eSmoker Online
Easy Fill Bottles | Empty Bottles and DIY Supplies | eSmoker Online
Hi noob here got my first ecig 6 days ago a ccpv mod with a fatty v2 atty 
read the first 80 pages of this thread and was convinced to get the eroll for both me and my wife unfortunately the joyetech dealer in the Philippines doesn't carry it would anyone know where the best place/website in Asia is to get this?
Was hoping
read the first 80 pages of this thread and was convinced to get the eroll for both me and my wife unfortunately the joyetech dealer in the Philippines doesn't carry it would anyone know where the best place/website in Asia is to get this? Was hoping
or anyone else could help me out with this
Hi noob here got my first ecig 6 days ago a ccpv mod with a fatty v2 atty
Was hopinghhmm none of the links work on Joyetech home pageor anyone else could help me out with this
you can try the address or phone numbers on joyetech site:Joyetech brand offline electronic cigarette shops
Have any family/friends in the states?
Also - the silver one is still tasting burnt. Later today i'll switch tanks. Then attys, etc, step by step. But if they have less problems like that with the SS mesh in the attys - whoever offered to do replace mine for me for a fee, I'm interested. I just spent 45 minutes trying to figure out how to put together a Texas Tuff Tank (yes, I watched the video) - I'm telling you, I'm great with some things - messing with parts is definitely NOT one of them.
Also - the silver one is still tasting burnt. Later today i'll switch tanks. Then attys, etc, step by step. But if they have less problems like that with the SS mesh in the attys - whoever offered to do replace mine for me for a fee, I'm interested. I just spent 45 minutes trying to figure out how to put together a Texas Tuff Tank (yes, I watched the video) - I'm telling you, I'm great with some things - messing with parts is definitely NOT one of them.
I've got some similar to those but they aren't pocket friendly or child-proof. I'd like some needle bottles that are both.
Hey jcy, welcome to the ECF!Hi noob here got my first ecig 6 days ago a ccpv mod with a fatty v2 atty
Was hoping dragonbone or anyone else could help me out with this
Try Health Cabin. They are a registered ECF supplier in China, and ship worldwide. I buy from them a lot.
Yup that was the backup plan but was thinking since they were made in china might be cheaper and faster to get them from china
Cool thanks so much that seems like a really awsome site I might Just end up getting more than just the erolls hihihi
Last edited:
OK... update.... I took the tank from the silver one (not working right) put it on the black one. Seemed to work OK, but then got a little weird- could be tank related. Took apart silver one thinking i'd transfer the atty over and see what happened - the atty was COVERED in fluid (of course the cone was, too.) Cleaned it out. Put the working well tank on the silver one, primed the atty, OK for the first two drags, then burnt. Tried a few more and it got SUPER hot. Once it cooled off - a fair amount of liquid on atty.
So is this a cone not fitting right issue - would that make fluid go around atty and cone and not into it (so getting burnt atty)? Does the black coating keep it from getting that hot - or is.... I'm just all sorts of confused. I have lots of eRoll pieces sitting here. Gonna flush out the burnt one (with hot water, not sure if that helps much) tomorrow.
So is this a cone not fitting right issue - would that make fluid go around atty and cone and not into it (so getting burnt atty)? Does the black coating keep it from getting that hot - or is.... I'm just all sorts of confused. I have lots of eRoll pieces sitting here. Gonna flush out the burnt one (with hot water, not sure if that helps much) tomorrow.
- Status
Similar threads
