Just got my brand new GGTS - AM I MISSING SOMETHING?!?

[kenmhall1]

OK...so I've got the bottom section, the top section, the collection tank, & the AVS...

I thought there was supposed to be a telecoping section? I know the aluminum one was extra, but I thought this was supposed to come with a brass one - or since this was the new nickel plated version...am I wrong?!? Is it EXTRA for ANY telescopic section?!?

<edit for obvious reasons - I've regained composure >

 

[VaporKings_Michelle]

Its there you can see a little bit of it sticking out of the top of the bottom section. You need to unscrew it out of the bottom section.

 

[buGG]

LOL!!! Yep, I see it. Put your forefinger on the inside of that tube, your thumb on the outside and rotate the unit clockwise (or counter-clockwise if you rotate from the inside)...the telescope will start to screw upwards. The 18350s will fit...once you get the telescope going.

P.S. Pretty GGTS by the way!

 

[SSRob]

Sometimes the telescope decides to unthread from the cap instead of from the bottom tube. Just attach it tightly to the top cap once you remove it and it should be fine from there.

Thanks
Rob

 

[RippleInStillWater]

When I got my first one from gadgetmonster I thought the same thing!!! Once I stuck my finger in and started screwing (wow, does THAT sound blue!) it came out and its been GGTS vaping since, alsthough the AVS is a learning curve like everyone had opined! Ooooh, yours IS bright and shiny, nice!

 

[kenmhall1]

WHEW!!! Sorry to freak people

Thanks for the SUPER FAST shipping - ordered yesterday...got it today - with USPS nonetheless

 

[SSRob]

LOL No problem Ken. You are just 101 miles up the road from me so that's part of the reason you got it so fast...but we are pretty quick too

Thanks
Rob

 

[kenmhall1]

now if I can just figure out how to get the pin to make a connection to the bottom of the atty in the avs tank, I'll be golden...

 

[imeothanasis]

you just screw the atomizer on the AVS 510 connector and the whole thing inside AVS tank ken

 

[kenmhall1]

I got 901 atties, so I put the 901 rethreader in the AVS 510 connector...but I don't see how the center post can be extended to complete the circuit for the positive side?!?

 

[imeothanasis]

thats impossible ken. You have to put a 510 atomizer because you have the 510 connector

 

[kenmhall1]

so I just spent $40 on HR atties I can't use in my AVS?!?

 

[imeothanasis]

I think yes ken. But you can buy the 901 connector when it will be ready in about less than a month. For now you have to buy 510 atomizers

 

[Para]

WHEW!!! Sorry to freak people

Welcome to the club....I was in the same boat and so were a lot of other new GGTS owners. Like they counseled me...chill; it will be fine.

We're kinda laughing at you, but in reality we are laughing at ourselves.

Here's to Good Times...the Holidays and a new GGTS

 

[kenmhall1]

Yeah, I just wish I would've noticed that the new AVS had a 510 connector instead of the 901 I had seen in all of the videos. I thought I was ordering what I needed based on all the videos that I didn't notice the connector was changed to a 510 and I ordered 10 HR 901 atties. Guess I didn't get the memo

 

[VaporKings_Michelle]

Yeah, I just wish I would've noticed that the new AVS had a 510 connector instead of the 901 I had seen in all of the videos. I thought I was ordering what I needed based on all the videos that I didn't notice the connector was changed to a 510 and I ordered 10 HR 901 atties. Guess I didn't get the memo

Ken if you can wait till Monday we will get you taken care of on the AVS. We are not working today but am over at the new place working on it.

Thanks
Michelle

 

[kenmhall1]

thanks michelle - and merry christmas...

 

[imeothanasis]

very nice of you Michelle. Thats the way I like GG sellers to treat customers

 

[GumbyOG]

don't worry i ordered a 901 atty too i heard about the 510 connectors being sold stock but i assumed it came with both or a combo >.<