Just got my reo

[m3nace]

Im loving it so far do you guys bore out your holes for more airflow or just leave it as is? And in the rm2 bag it came with an o ring I dunno if im supposed to put it on or if its a spare as when I was inspecting it I didnt find an o ring placed anywhere.
But here it is

Sent from my SGH-T889 using Tapatalk

 

[redeyedancer]

Good evening m3nace and welcome . I leave the hole stock myself its a personal preference thing . The o ring goes in the juice well .

 

[m3nace]

I just got me reo with the rm2 and in the rm2 bag theres an o ring im not sure if its a spare or if im supposed to out it on other than that im loving the mod hasnt left my palm lol
Here it is
I was wondering if any of you have made the airhole bigger or if its best to leave it alone

Sent from my SGH-T889 using Tapatalk

 

[JC Okie]

Somehow you have two threads....and Rob (redeyedancer) answered on the other thread. Nice looking REO for sure!!! Congratulations. The o-ring goes in the drip well. Some of us use them; some don't. Sometimes they help with the positioning of the airhole on the RM2. The airhole needs to be pointing AWAY from you when you're drawing a vape. Sometimes, because of threads or whatever, you need the o-ring to help make adjustments.

Have fun.

 

[custom-classic]

The oring goes under the rm2. I left my air hole stock.
Congrats!!!

 

[super_X_drifter]

Congrats on your knockout combo menace. I went 1/16" but that was because I was already accustomed to it when I got my RM2s.

Welcome

 

[m3nace]

Im used to a more airy draw so bigger holes would make it more comfortable for me right?

Sent from my SGH-T889 using Tapatalk

 

[m3nace]

Thank you redeye lol I gotta come home after work and put it in haha

Sent from my SGH-T889 using Tapatalk

 

[ltrainer]

I would leave it like it is for a few days. Sometimes a size can grow on you. IF after a few days you still don't care for it then have a go at it. Just go at it slow though. A little bit can go a long way and its tough getting a large hole smaller.

 

[pesky_human]

I left mine stock for a while, then ended up going to 1/16. I'm getting better vapor production and fewer dry hits with it this way. I ended up doing my second RM the same way. The draw is a bit more airy, but not too much.

 

[custom-classic]

Hey Christian, are you lung hittin' with that 1/16" hole?

 

[m3nace]

My patriot is pretty air it whistles when I draw

Sent from my SGH-T889 using Tapatalk

 

[pdib]

If I had to pick just one size of air hole, it would be 1.4mm (. . .. . maybe 1.45)

1/16" is ~1.6mm for reference. Factory is ~1.15 - 1.2mm


Congrats, m3nace!

 

[Rhapsodies Fire]

Congratulations, m3nace!

 

[feldwin]

I have 1 stock and 1 drilled out to 1/16" Still not sure which I like best. I get better vapor production from the one I drilled out, but I like the tighter draw of the stock one. So... I guess I'm still on the fence. If you drill it out, go slow.

 

[bunker0617]

I'm loving my drilled 1/16

 

[LarryPer]

Good evening m3nace and welcome . I leave the hole stock myself its a personal preference thing . The o ring goes in the juice well .

Great Vid
Is there anyway I can adjust my post on my RM2 to face forward like the ones in this vid?
Mine point to the side and and its a real pain
Thanks

 

[Marvin & Sennie]

Welcome to REOville!! I left mine stock but I personally like a tighter draw and I'd be too paranoid that I totally mess up what is perfect already. Good luck!!

 

[mackman]

Welcome. I too left mine stock, if I drilled it out I might have to buy another RM2 for the other Reo I know I will have in the near future

 

[ancient puffer]

Great Vid
Is there anyway I can adjust my post on my RM2 to face forward like the ones in this vid?
Mine point to the side and and its a real pain
Thanks

The posts are threaded, so you can probably *carefully* adjust them by putting a pin through them and easing them into position. If they're already tight, loosen them a bit (that's the nice part about the hole going all the way through the post )