kanger dripbox 160 reading ohms wrong

[Hendog24]

You may need to pry the centre-pin up on the dripbox.

Use a small screwdriver and slowly lift the centre pin slightly a little at a time.

Remove the batterys first though.

The squonk pin in the mod?

Sent from my SM-N910P using Tapatalk

 

[opticruby]

The squonk pin in the mod?

Sent from my SM-N910P using Tapatalk

Yes, the pin in the mod.

It's a fixed pin (not spring loaded), and they get squashed down a bit too low after a while and need to be lifted up a little.

A small flat-head screwdriver is what I usually use, and work my way round slowly and very slightly lifting it up a little at a time.

 

[Hendog24]

Yes, the pin in the mod.

It's a fixed pin (not spring loaded), and they get squashed down a bit too low after a while and need to be lifted up a little.

A small flat-head screwdriver is what I usually use, and work my way round slowly and very slightly lifting it up a little at a time.

Thank you. I will try that asap.

Sent from my SM-N910P using Tapatalk

 

[opticruby]

Thank you. I will try that asap.

Sent from my SM-N910P using Tapatalk

Your welcome. Hope it helps.

 

[db132]

so i am somwwhat new to vaping and i dont know how to build coils. are there coils already built with the cotton already threaded in that i can use with the velocity v2? once again sorry for all the questions

 

[Cheallaigh]

I know they will fit the box, might fit the v2
Kanger Subdrip Replacement Coil

 

[Cheallaigh]

once you start building, if you like it, you probably wont buy prebuilt again.. unless it's for convience, like going away for the weekend emerg use...

 

[Cheallaigh]

just came across this, from what I understand it is compatable...

Hadaly RDA by Psyclone Mods – VAPEHAPPY

 

[db132]

do the kanger subdrip coils fit the v2?

 

[Hendog24]

I know they will fit the box, might fit the v2
Kanger Subdrip Replacement Coil

What??? How do you expect those to "fit" in a Velocity? Those are replacement coils for the atty that comes with the Dripbox.

Sent from my SM-N910P using Tapatalk

 

[Hendog24]

so i am somwwhat new to vaping and i dont know how to build coils. are there coils already built with the cotton already threaded in that i can use with the velocity v2? once again sorry for all the questions

Not really. You can buy pre wrapped coils and install and wick them but there aren't drop in replacement coils for a real dipper like the Velocity.

If you don't have the desire to learn how to build you should just buy a tank with replacement atomizer coils. Nothing wrong with that. My brother vapes and he has no idea how to build.

Sent from my SM-N910P using Tapatalk

 

[daviedog]

In the old days, pre 08/2016 your vape shop would fix you up.
There are pre wicked coils at fasttech
Long wait.
Google Wicking, plenty of tutorials. Take the bull by the horns & learn.
Independence is a Beautiful thing..

 

[Cheallaigh]

hence the word might... mostly I'd just strip them for the parts.

 

[Cheallaigh]

he's got the dripper and those drop in replacements will fit it...