Im new to the forum....Anyway i have been having issues recently with the Protank II i don't know if it's the heads or what sometimes they wick well sometimes they don't. I have been using my protanks on my Provari V2.5 and my LavaTube V2. Tried removing the "flavor wicks" and all i get is flooding. Am i doing something wrong? Been proudly vaping for 7 months.
Kanger Protank II issues
- Thread starter ESPMARSHALL91
- Start date
- th_trl_thread_readers 0
- Status
Hello and welcome.
Have you watched any utube videos on how to re-build one of these tanks. If you just pull out the wicking then there is nothing to keep it from flooding. If you get a head that is not wicking with your ejuice, you can gently pull up on the plastic hat(it is what I call it) to expose the wicks a little more. That usually helps when I do that to mine. If your ejuice is too thick, it may not be able to wick quickly enough with how you are vaping it.
Hope this helps a little.
Hello and welcome.
Have you watched any utube videos on how to re-build one of these tanks. If you just pull out the wicking then there is nothing to keep it from flooding. If you get a head that is not wicking with your ejuice, you can gently pull up on the plastic hat(it is what I call it) to expose the wicks a little more. That usually helps when I do that to mine. If your ejuice is too thick, it may not be able to wick quickly enough with how you are vaping it.
Hope this helps a little.
Great advice Sugar_and_spice, ill remember that the next time my PT2 floods
I take out both when gaping 100% vg. I also found a fix by adding another one of those white rubber things upside down on top of the other one on the stem and no more leaking.
There's some blog out there that explains it with pics.
There's some blog out there that explains it with pics.
Might want to try some sterile cotton for the flavor wick. Or just take one flavor wick out. Higher vg juices tend to be thicker. Some people use a Q-Tip and twirl off some cotton or some from a cotton ball. Some people use cotton yarn. Might help with the wicking issue.
Different juices wick differently. With some juices, I don't have to remove any flavor wicks, with others I do have to remove wicks. With some juices, I vape lower than 5 watts to get good vapor and flavor. With others, I vape over 7 watts to get good vapor and flavor.
The juice is wicking too quickly for the power you're using. After clearing the flood, you might try adding more wick or increasing the watts for this juice (if you can't directly control your watts, use a coil with lower resistance or increase your voltage).
One of the simplest ways to clear the flood juice, in my experience, is to remove the tank, wipe any juice off the battery with a paper towel, wrap the tank in a paper towel and shake the excess juice onto it, and replace the tank.
I always replace the flavor wicks with cotton. I always had a problem with them using 50/50.
Sent from my SCH-I605 using Tapatalk
Sent from my SCH-I605 using Tapatalk
Not all heads are made the same. The kanger coils are so popular that there are others now copying them.
This is why I always rebuild mine
This is why I always rebuild mine
- Status
Similar threads
- Locked
