SUBTANK REPLACEMENT O RING SET - Accessories
Have o-ring sets, Im sure other places to too but i know of this one.
Have o-ring sets, Im sure other places to too but i know of this one.
Kanger Subtank Mini drip tip options ??
- Thread starter medic181075
- Start date
- th_trl_thread_readers 0
- Status
The subtank driptip size does seam a little off. I don't like the stock one either. My nautilus driptip is too bigAt the moment i have the tip from my lemo in it and feels a little better. I don't have many driptips to try out, I think ill head to my local B&M and see if i can try them in it and find something else i like.
I had to go through almost all of the tips at my local B&M to find one that fit...actually...thinking about it, I had to do the same with ones for my emow tanks as well. I finally found 6 that fit. 2 are long for my STM and STN - one metal.
easy reach, less arm strain to mouth, cool to the mouth, no more hot tongue.
i got luck w/these as they fit.
in pic shows 2 drip tip sets(long & multipiece) from canvape.
long tip https://www.canvape.com/ProductDetails.asp?ProductCode=TBSSDT&CartID=0
long tip fits the subtank
multi piece delin tips https://www.canvape.com/ProductDetails.asp?ProductCode=SSDELRINDT
in the multi piece set(4 pieces) the 2 ss pieces didnt fit the subtank, one of them is in pic just below the long tip.
both delrins fit the subtank, go figure.
Last edited:
I've ordered one of these tips...
They come with two glass tips that attach to the base, one short 12mm and a longer 15mm glass tip.
I tried another glass tip, and had to change the gasket with the one that came with the included tip from the Sub Tank Mini, and then it fit fine, but it came apart after a week! The glass portion that was glued down to the stainless steel base, came loose and separated. The store exchanged it for another of the same type, and it also lasted only a week.
The one shown below, the glass is held down with gaskets, not glue and you can exchange them, or, if they break, purchase new glass tips for $3.00.
Hope they work, as that's my only gripe about the Sub tank mini... LOVE it, but the tip gets WAY too hot for me!
I'm really thrilled with the Kanger Sub tank mini and nano, on top of the ELeaf IStick 50w... just a fantastic combo, that lasts me all day! Now if I could just find a great drip tip, preferably glass or Pyrex, I'll be all set!
They come with two glass tips that attach to the base, one short 12mm and a longer 15mm glass tip.
I tried another glass tip, and had to change the gasket with the one that came with the included tip from the Sub Tank Mini, and then it fit fine, but it came apart after a week! The glass portion that was glued down to the stainless steel base, came loose and separated. The store exchanged it for another of the same type, and it also lasted only a week.
The one shown below, the glass is held down with gaskets, not glue and you can exchange them, or, if they break, purchase new glass tips for $3.00.
Hope they work, as that's my only gripe about the Sub tank mini... LOVE it, but the tip gets WAY too hot for me!
I'm really thrilled with the Kanger Sub tank mini and nano, on top of the ELeaf IStick 50w... just a fantastic combo, that lasts me all day! Now if I could just find a great drip tip, preferably glass or Pyrex, I'll be all set!
One of those delrin multi piece tips might be good, I could use one section then add what ever i fancy onto it.
The subtank driptip size does seam a little off. I don't like the stock one either. My nautilus driptip is too big
Lucky you! Many of us don't have local B&M stores. We have to rely on the internet to answer these questions. If I think something may work, I have to buy it, wait for it to arrive, and then try it out .... just to find out that it doesn't work for my needs.
This drip tip looks great but the o-ring sits low just like the Smok Mega. The o-ring groove on the Subtank is shallow, hence the problem. I guess it's worth a shot though, let us know if it works.
Last edited:
Actually, the o-ring sits significantly lower than the Mega. Because of this, I am hoping that the o-ring will sit nowhere near the groove in the Subtank and, therefore, not pop up into the groove. I ordered a clone ebay and I am hoping it will be here by the middle of the week. We will all know at that time.
Last edited:
I think I see a small gap between that tip and the tank. Does it wobble around? That definitely isn't for me (way to big), but it may help some other people who are having this problem.
Yeah it's not perfect, but I like the tip and it has a nice open draw
The $5.99 innovape silencer clone showed up yesterday. It fits very nicely with almost no movement or wobble. I have been vaping for a few hours now and I don't have any leakage around the tip either. It is a bit bigger around than the Mega Pyrex, but not too bad. It does get warm on longer hits, but not hot. I would assume this is because the glass is thinner than the Mega Pyrex. It is also more open than the Mega Pyrex, but I didn't really notice a difference during use. One thing that I really don't like is the fact that it shows all of the condensed e-liquid inside. I guess that is a product of the larger diameter chimney.
Overall, at this point, I will say that I am generally happy with this drip tip.
Overall, at this point, I will say that I am generally happy with this drip tip.
Vapor Shark has released a new drip tip called the Uncrustable.
They sell it with either one or two orings, and recommend getting it with one o-ring for use on the Kanger Sub tank.
It supposedly doen't get all gunked up when using it, having a special type of finish similar to that used on frying pans!
Rather reasonable, at $10!
I have one on order, should be here in a day or two. If anyone's interested, I'll let you know how it is.
They sell it with either one or two orings, and recommend getting it with one o-ring for use on the Kanger Sub tank.
It supposedly doen't get all gunked up when using it, having a special type of finish similar to that used on frying pans!
Rather reasonable, at $10!
I have one on order, should be here in a day or two. If anyone's interested, I'll let you know how it is.
Last edited:
I may have to look into one of those. I am looking for a drip tip now for my Subtank and nano as they are both destroying my lips in the cold dry weather.
all kanger products will not fit dual o-ring tips. I wish they did since most of the good ones have duals. I had a cnc guy make me a custom one with one o-ring. it is a little loose in any kanger. it is probably the best tip I can get with one o-ring though. I have no idea why aspire fits anything but kanger does not. not sure why they did not think to make it deeper. oh-well because the subtank with nickel is better than the atlantis imo.
What Shel said. I ordered 2 uncrustables and then I loved em so much I got 2 more. Make sure you get single O-Ring for the subtanks and Double O-ring for any tanks that use double orings on their OEM driptip.
I don't like wide bore tips.. I use the tips from my GS Air tanks, I like shorties on those- take the oring off, and using some sand paper, I took down the bottom diameter to fit the subtank, oring back on and it just snaps right in. doesn't wiggle or wobble and perfect height and diameter for me!
Last edited:
Well I ordered one uncrustable. They don't get hot like the Kanger ones do they?
Its been a while since I've used the OEM ones but I haven't noticed it being an issue. If I take a super long drag and my lips are all the way down on the mouthpiece then it can get warm. I'm vaping .6 RBA coils at 30 watts with 90vg. 3 and 6mg
- Status
Similar threads
- Locked
- Locked
