Kanger T3 Overheating

[Waramir]

So i got 2 Kanger T3s and filled them with 2 of my favourite juices. Using them with Ego Twists at 3.8 - 4.0 volts

One of them is working like a champ , but the other one is overheating way too much. To the point where i need to put it down for a few minutes before taking another drag.

It heats so much that even my ego twists start getting how (specially the stainless steel/silver) one.

Why is this happening? anyone have any ideas? (i did buy spare heads so i could try replacing it with a new one , but wanted to make sure before opening a new one)

(i got them on saturday btw so i've been using them for 3 - 4 days), maybe 2 - 3 refills. (The juice im using is Vermillion river Kentucky Banana-wood).

 

[cocacola31173]

Try filling up the clearomizer with warm water and put it back together and shake it...do this about 3 or 4 times then blow out the thread end and let it dry overnight. Sometimes the wicks just get clogged up. Some will tell you can take the base apart to clean but when ever I do that I mess them up. I always do this between refills.

 

[Waramir]

I Think i fixed it.

What i did was wash with warm water and the open up the head and removed the top wicks leaving only the last wick and the coil (it wasnt too dirty) i dry burned it a little and saw that the coil was touching the outer metal ring/enclosure a little bit, so i separated it with a toothpick.

It seems that since the coil was touching the metal enclosure thats what was causing the entire head to over heat.



Its no longer overheating.