Kanger T3S with VV/VW mods
- Thread starter VapieDan
- Start date
- th_trl_thread_readers 0
- Status
mods? None that I am aware of. Anything with a recessed eGo connector won't fit a T3s base. (A T3s base won't find in any recessed connector - it's just too large.) And anything with a plain 510 connector would need an adapter.
Searching... searching...
The only thing I see would be an MVP 2.0 that has an exposed eGo type connector. But you have to love the MVP 2.0 concept to want to go there. I would still want to confirm whether that's an eGo connector or not. One site I checked calls it a "High compatibility 510 connector" - whatever that is supposed to mean. The pictures weren't sharp enough to confirm it has eGo threading.
Why not just use a 510 to eGo adapter? The T3s doesn't really look weird sitting "on top" of most PV's like a Vamo when attached with an eGo adapter.
The only thing I see would be an MVP 2.0 that has an exposed eGo type connector. But you have to love the MVP 2.0 concept to want to go there. I would still want to confirm whether that's an eGo connector or not. One site I checked calls it a "High compatibility 510 connector" - whatever that is supposed to mean. The pictures weren't sharp enough to confirm it has eGo threading.
Why not just use a 510 to eGo adapter? The T3s doesn't really look weird sitting "on top" of most PV's like a Vamo when attached with an eGo adapter.
Since I have a few new T3s I may try an adapter. Anyone recommend a quality one? Seen some bad comments about these on a few sites.
I have an MVP2 and use it with my T3S all the time and it works just fine. The MVP2 is ego threaded as well.
Sent from my DROID4 using Tapatalk
The MT3S doesn't fit the wells of my SVD or KMax. The T3S does. Haven't put the calipers to 'em, but the MT metal cladding makes it a tad bigger around.
Any mod with a native Ego/510 AND a removeable collar should be fine, worst case being you take off the collar.
Any mod with a native Ego/510 AND a removeable collar should be fine, worst case being you take off the collar.
T3S fit PERFECTLY on a Itaste VV V3 ...... Innokin iTaste VV (V3) Express kit. May still be $25.99 at: http://101vape.com/mods/183-innokin-itaste-vv-v3-express-kit.html IN STOCK at this moment - but might go quickly. GREAT VENDOR as well.
I'm vaping on it now ............ SWEET!
Senile Old Man Don
I'm vaping on it now ............ SWEET!
Senile Old Man Don
Last edited:
I am vaping on the same exact setup right now. Vv v3 and kanger t3s with some blue moo from MBV. Running around 4.2v. I love the vapor production from the t3s. I also like the capacity it has while still being fairly small.
Sent from my DROID4 using Tapatalk
Mine will fit on the Vamo 3 with no problem and since you like the T3 you need to try these...Smoktech ARO Pyrex Glass BCC - Stainless
I use the T3 heads with them and they are pyrex so you can put anything in them. Tastes just like a T3 to me but don't have to worry what to use in them. They hold a bit more too.
I use the T3 heads with them and they are pyrex so you can put anything in them. Tastes just like a T3 to me but don't have to worry what to use in them. They hold a bit more too.
The Innokin SVD has Ego threading. It's top cap is removeable to screw on ego threaded atomizers. The MVP2 is another nice choice.
I'm using a T3S on my MVP2 as I type this. Works perfectly (much better than the iClear 30 that came with the MVP2, IMHO).
An svd works fine. Top ring comes off but I had issues with it turning itself off. The new vamo has a removable top ring that should work. I've been using an SID and it works but have to file a bit off the bottom of some of these generic t3 bases for some reason. I have two SIDs. Had to clean the connections to get one working but now they are both fine.
- Status
Similar threads
