I am running a T3S coil in my EVOD right now, no issues. I don't have a protank yet, or I would try it.
- Status
I am running a T3S coil in my EVOD right now, no issues. I don't have a protank yet, or I would try it.
I'd love to know if you can screw eVod bases with a T3S head into an older T3 plastic. I need it to make contact properly on my eVic.
Last edited:
I didn't fill it up or anything, but I don't see any reason why this wouldn't work either. I screwed in the evod base to the T3 body just fine with a T3s head on it.
I had it happen on one so far. A 1.8 ohm. Same thing. Loosen/tighten and problem fixed. Can't find my meter right now.
Had another weird problem today. Setup was vaping perfectly last night; new T3S with new base/coil unit. Working fine. Went to sleep around 4AM, woke up at 11AM and NOTHING but burnt, dry, harsh hits. Loosening and re-tightening never fixed the problem. Tried this on two completely new bases and heads, on two different T3Ss (one clear, one stainless MT3S) and never got a good result on either my eVic or SVD. Finally gave up and plopped an old T3 base into the clear T3S and all is well again.
Weirdness. I must be doing something harebrained.
Weirdness. I must be doing something harebrained.
I should probably note once again that I am a certified goof and a klutz and am prone to making errors even when doing the simplest of tasks. I have a startling tendency to overlook the most obvious things and I think this contributes greatly to the seemingly endless problems I encounter with darn near everything.
Case in point: ProTanks have been problem free since I got my first one about 2 months ago. I've been using Evod heads in the bases to tighten up the draw a bit. Tonight I decided to give the ProTank specific heads a try, and now instead of an airy draw, I'm getting dry hit after dry hit. This is on both my eVic AND my SVD. I guess what I'm saying is, feel free to ignore my complaints. Every now and then some lighting bolt of common sense strikes me and I realize what I've been doing wrong, but that's pretty rare.
Case in point: ProTanks have been problem free since I got my first one about 2 months ago. I've been using Evod heads in the bases to tighten up the draw a bit. Tonight I decided to give the ProTank specific heads a try, and now instead of an airy draw, I'm getting dry hit after dry hit. This is on both my eVic AND my SVD. I guess what I'm saying is, feel free to ignore my complaints. Every now and then some lighting bolt of common sense strikes me and I realize what I've been doing wrong, but that's pretty rare.
I should probably note once again that I am a certified goof and a klutz and am prone to making errors even when doing the simplest of tasks. I have a startling tendency to overlook the most obvious things and I think this contributes greatly to the seemingly endless problems I encounter with darn near everything.
Case in point: ProTanks have been problem free since I got my first one about 2 months ago. I've been using Evod heads in the bases to tighten up the draw a bit. Tonight I decided to give the ProTank specific heads a try, and now instead of an airy draw, I'm getting dry hit after dry hit. This is on both my eVic AND my SVD. I guess what I'm saying is, feel free to ignore my complaints. Every now and then some lighting bolt of common sense strikes me and I realize what I've been doing wrong, but that's pretty rare.
Thanks! I'm going to order a couple T3S and see how they work. 21 bucks is not a lot of damage, so I can afford it
I was having the same problem with one of my two T3s'. I would get a couple of good hits, then it would seem to short out. The flavor also seemed "off" somehow. I think I just figured out my problem-the base wasn't tightly screwed into the tank. I noticed a little leakage around the outside of the tank. So once I took the tank off the battery and tightly screwed the base back into the tank, problems solved-no more shorting out and improved flavor.
I solved the irritating-as-#(@! burnt issue I was having. Just removed one of the flavor wicks that sits atop the coil. Shoulda thought of that sooner. Nuclear D'OH!
And the connection issue I've easily solved by pulling the pin down just a teeny tiny bit.
No more issues at all with the T3S. I'm lovin' it. Now if I could just get this stupid #(@ing SmokTech Terminator RDA tank thing working right. Other folks are having zero issues, I get nothing but flooding and dry hits. As I've just illustrated, it's probably something obvious I'm overlooking. I'm getting lots of help in other threads though. This forum is full of great, helpful, patient people!
And the connection issue I've easily solved by pulling the pin down just a teeny tiny bit.
No more issues at all with the T3S. I'm lovin' it. Now if I could just get this stupid #(@ing SmokTech Terminator RDA tank thing working right. Other folks are having zero issues, I get nothing but flooding and dry hits. As I've just illustrated, it's probably something obvious I'm overlooking. I'm getting lots of help in other threads though. This forum is full of great, helpful, patient people!
I am using a T3S head on a EVOD flawlessly. Everyone uses EVOD heads on a protank, I would bet it would bet it would be just fine.
Stormy's already got stock. I'm planning on ordering two and see if they work. I have too many clearos already, 4 T3, 2 Vapeonlys and 2 eVods... Too many different heads. I want to love either Protanks or T3S, heads are much cheaper compared to the Vapeonly... Time will tell!
Yeah I hate that the VapeOnly's heads are so much more expensive than they should be. For the price of three of them, you almost might as well buy a whole new kit. I've been having too many issues with them though. Burnt if I leave all the flavor wicks in, flooding once I get past 1/2 empty if I remove one. I've given up for now. I might try them again if the price comes down, because I WANT to like them. They look snazzy on an eVic with the black tubes.
I have...works the same to me. So now I just have to buy one kind of coil for my T3 my T3S and my protank! Sweet!
I've been having quite good performance. Most of my liquids are 60/40 or 70/30 and I rarely have to remove wicks. Sometimes I get a little gurgling but I roll up some paper and stash it down the center channel as far as it'll go while turning it upside down. That removes all the gurgling. As for dry hits, mine does it when the head is dirty. Try dry burning it or another head.
The BCC has a lighter vapor, but the thing I hate most is cost. 12 for the clearo, 3 bucks for a driptip, 15 bucks for the spare heads. But I love the form factor, 3.5 ml and the thing looks dainty. It's a day's worth of eliquid. Works very well, but the best flavor I get out of the eVod.
If I may...
I love the Terminator C RBA tank. I have 3 that vape all day. It's tricky to get it working but once you do, vapes great. Try the V1, I like it better Terminator-C R/A Tank V2
But really, at the prices of disposables, no RBA have a match. Maybe better flavor from a Genesis like but T3 vape like crazy. Plus, they last a long time, while my Term needs a new coil every 2 or 3 weeks. I'm vaping them because I have them, but really, I love the way disposables are vaping right now.
Thank you for this! I was getting burnt taste on my LR T3S's and low and behold I found the wicks and pulled a few out. Some of them were burnt too! Will see if that works for the long term. I really prefer the LR's draw.
- Status
Similar threads
