Hi i startet with a mechmod bottom switched with id clone dripper where i made my own coils that work now i wanted to upgrade to a boxmod. I now got a kangertech kbox witch looks pretty cool my problem is when i make my dripper with a dual coil and get a resistance of 0,7 or 0,8 ohm it won't work in the manual it says it goes down to 0,4 ohm i use 0,4 mm kantal and with my coil program it says i need 10 wraps but it still won't work do any one got a tip to how to make the coil so i can use my wonderfull gift
Kangertech kbox
- Thread starter Blanco
- Start date
- th_trl_thread_readers 0
- Status
Try dry burning the coil and lightly press on it to make it tighter with pliers using a mechanical mod. That usually does the trick when my cloupor mini doesnt fire my builds.
Just did and it has a ricistance of 2,1 and the box still make the not enough flash i did mak one yesterday that workd like 2-3 hours then i tryed to make another one tryd it on and then the first one didn't work so i'm completly lost
The flash doesn't always mean not high enough ohms or too high, it also means you could have a short. which if its doing it one other atty's then its probably the box itself, I have a KBOX and haven't had any issues yet.
Try a different rda. KBOX fires down to .2 ohms.
Try a different battery.
Try different wattage settings. You wouldn't be able to generate 40w on a 2 ohm coil.
Stop putting commas where they don't belong because it makes it difficult to understand what you are talking about.
Try a different battery.
Try different wattage settings. You wouldn't be able to generate 40w on a 2 ohm coil.
Stop putting commas where they don't belong because it makes it difficult to understand what you are talking about.
Or perhaps a mechanical bottom feeder box mod like the REO Grand. These things are indestructible.
- Status
Similar threads
