Kawfee beanz, DIY and assorted Shenaniganery :)
- Thread starter dcfluegel
- Start date
- th_trl_thread_readers 0
- Status
I would love to be looking out at that with a cuppa kawfee and mah vape.
G'morninz erryone! Toes Go In First!
@markfm - hope you survived day from hellz. Being in meetings for that long makes me want to put a drill to my head and let the boredom out
@LynnNC, your Nauti 2 should be fine with the same coils as the Nauti and Triton Mini. I haven't tried, but I don't think the standard Nauti coils work in the Nauti X
Only remaining fallout from the blergh week is that my TV/Internet got fried. Tried rebooting this and resetting that. Found an article online about disconnecting the backup battery to the FIOS box to try to reset. Ix-nay. So after an HOUR of HIDEOUS hold music, I talked to the lovely support person who was trying to prompt me through all the same things I'd done. "We'll send a technician out on Saturday". That will work for me.
Thanks LadyDinger! I'm sorry your TV/Internet got fried. I hope it's an easy fix that doesn't require a lot of $$$ to fix.
I'm hoping for as much money as I pay them monthly, they just replace it
If I ever have problems with a router or a set-top box, I just take it into the local store, and they hand me a new one
Virtually no questions asked 
It's not like I really "watch" TV - it's generally on for "noise". But, I do miss my wireless
I'm just grateful for lights and heat! Poor Uncle Kerm...... Power came back on yesterday, and he said he heard the blower for his furnace kick on. However, no heat
He futzed and he futzed and he futzed (seven HOURS later) until he noticed the "RESET" switch on his furnace.... They put in an on-demand water heater, and "Momma" put the paperwork for that away a little too well 
He figured there's a reset for it too, but not sure how/where....
From what I remember reading, Nauti X coils won't work in any other Nauti, and no other Nauti coils will work in the Nauti X... but I've been wrong before.
Sorry to hear about the TV/Internet, @DingerCPA hopefully they'll get ya all fixed up tomorrow! And if Uncle Kerm can find the model number for the on-demand heater, he should be able to find the manual in PDF format online.
I gotta take off in about an hour. Need to take my Darling Bride in to the doc... I think they're supposed to remove the cast on her leg today and put her in a "walking boot". Not sure about that, but I guess we'll find out in a l'il bit... I just came in to work to make sure there weren't any fires that I needed to put out before I spend the next half of the day at the doctor's office. So far, so good... we ain't got nothin' to work on today, so nothin' got set on fire. Yet.
Sorry to hear about the TV/Internet, @DingerCPA hopefully they'll get ya all fixed up tomorrow! And if Uncle Kerm can find the model number for the on-demand heater, he should be able to find the manual in PDF format online.
I gotta take off in about an hour. Need to take my Darling Bride in to the doc... I think they're supposed to remove the cast on her leg today and put her in a "walking boot". Not sure about that, but I guess we'll find out in a l'il bit... I just came in to work to make sure there weren't any fires that I needed to put out before I spend the next half of the day at the doctor's office. So far, so good... we ain't got nothin' to work on today, so nothin' got set on fire. Yet.
Poor Uncle Kerm!! I've done that before too!I'm hoping for as much money as I pay them monthly, they just replace it
If I ever have problems with a router or a set-top box, I just take it into the local store, and they hand me a new one
It's not like I really "watch" TV - it's generally on for "noise". But, I do miss my wireless
I'm just grateful for lights and heat! Poor Uncle Kerm...... Power came back on yesterday, and he said he heard the blower for his furnace kick on. However, no heat
I hope DB gets good news today!! I'm glad you didn't have any fires to put out!From what I remember reading, Nauti X coils won't work in any other Nauti, and no other Nauti coils will work in the Nauti X... but I've been wrong before.
Sorry to hear about the TV/Internet, @DingerCPA hopefully they'll get ya all fixed up tomorrow! And if Uncle Kerm can find the model number for the on-demand heater, he should be able to find the manual in PDF format online.
I gotta take off in about an hour. Need to take my Darling Bride in to the doc... I think they're supposed to remove the cast on her leg today and put her in a "walking boot". Not sure about that, but I guess we'll find out in a l'il bit... I just came in to work to make sure there weren't any fires that I needed to put out before I spend the next half of the day at the doctor's office. So far, so good... we ain't got nothin' to work on today, so nothin' got set on fire. Yet.
So...I got told by one of my coordinators last night that she had talked with the plant manager about me yesterday. It seems that she thinks I'm too old and too slow to be doing what I'm doing. Ohhh-kay...
I'll bet! That would drive me wild if I couldn't walk.She'll be happy as a clam if they tell her that she can start walking again!
So...I got told by one of my coordinators last night that she had talked with the plant manager about me yesterday. It seems that she thinks I'm too old and too slow to be doing what I'm doing. Ohhh-kay...
Did she happen to mention that the plant manager told her that she is too much of a shrew to be in charge of anything?
Sometimes, I wish that karma was a little more instantaneous...
Best wishes for DB, I'm sure she will be happy to be able to walk again.I gotta take off in about an hour. Need to take my Darling Bride in to the doc... I think they're supposed to remove the cast on her leg today and put her in a "walking boot". Not sure about that, but I guess we'll find out in a l'il bit... I just came in to work to make sure there weren't any fires that I needed to put out before I spend the next half of the day at the doctor's office. So far, so good... we ain't got nothin' to work on today, so nothin' got set on fire. Yet.
Hmmmm, last time I checked that can be a pretty dangerous comment for someone with any kind of authority to make about an employee...So...I got told by one of my coordinators last night that she had talked with the plant manager about me yesterday. It seems that she thinks I'm too old and too slow to be doing what I'm doing. Ohhh-kay...
No! The plant manager told her they were looking into solutions.Did she happen to mention that the plant manager told her that she is too much of a shrew to be in charge of anything?
Sometimes, I wish that karma was a little more instantaneous...
Not where I work. The coordinators there that get things done have carte blanch to do or say whatever they want. For example, this particular coordinator got rid of 12 line feeders in the last year and a half.
Thanks, Brother!
Yeah, that'd be my thought, too. And for her to come out and admit to it... that's grounds for a whole lotta trouble and just shows how ignorant and immature she is. Definitely not someone who should be in a position of authority.
No! The plant manager told her they were looking into solutions.
Hmmmmm... maybe that could mean that he's looking for a different position for you? That could work out in your favor.
That's what I'm banking on. I'm hoping that they let me feed just 1 cell. I don't so much mind feeding HER cell because I really like the other 3 people in the cell. I love all 4 of my coordinators in my other cell.Thanks, Brother!
Yeah, that'd be my thought, too. And for her to come out and admit to it... that's grounds for a whole lotta trouble and just shows how ignorant and immature she is. Definitely not someone who should be in a position of authority.
Hmmmmm... maybe that could mean that he's looking for a different position for you? That could work out in your favor.
Yeah, getting it down to you only having to worry about one cell would be nice. Especially since it seems like that's what most others are doing, right? If I understand right, there aren't a whole lot of people that are feeding multiple cells.
- Status