Kayfun 30mm with 26650

[damaged002]

So I recently bought a kayfun Lite clone 30mm and I want tips on how to build it properly. I used it for a couple weeks with the standard wicks and coils that I received. Ran at 2.24 ohms and it was fine. No leaking at first.
Then leakage from the airhole happened all the time, suddenly. Broke it down and rebuilt the coil. Now running at .9 ohms using very long strands of cotton as I'd heard it will take care of leakage. The cotton helped, but still leaking. It's primarily leaking from the air hole, but I believe it's also leaking from the fill hole. Any help would be great. Watched tons of Youtube videos with no help.

Thanks guys!

 

[Towmotor]

Most leaking issues with Kayfuns seem to be caused by a break in the vacuum seals or by wicking. Check all your O rings and when you re-assemble ensure that you have not cross threaded any sections, especially if you are using the clear plastic section of the tank. Kayfun can be finicky about wicking, too much wick will cause some leaking issues too.

 

[classwife]

Moved to Rebuildable Atomizer Systems from the Modding Forum - Atomizer Mods

Modding Forum
The home of modders - the builders or modifiers of custom ecigs.