Kayfun small clear tank tube

Status
Not open for further replies.

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
This is just the clear tube portion of the tank and a lot shorter than the one that comes standard with the K lite. Steam Tuners calls it Tiny Clear and says this about it: … fits on the atomizer without using any chimney. Due to its super nano dimensions, gives the atomizer a tiny look that fits great even with the smallest mods.

Has anyone tried it? Comments?

I found it for sale at Kayfun Small Clear Tank Tube | Madvapes
 

DaveP

PV Master & Musician
ECF Veteran
May 22, 2010
16,733
42,646
Central GA
I have 6 or 7 Kayfuns (Lite V2 and 3.1's). They all came with the long clear tube and the short one. I use the short tube, but have used the long tube at times. IMO, you need some way to view juice level. With the short tube I just flip the tank horizontal to get a true reading on juice left.

I don't get the part about not using a chimney. The chimney encloses the coil deck and meters juice flow to the wick through the channels. The narrow top part of the chimney seals to the top cap and delivers vapor to the drip tip. IMO, the chimney is a necessary item.

Maybe I'm missing something, but it looks like a replacement for the same part that comes with the Kayfun. If there's a shorter one that makes the entire atomizer shorter, then they would need to include a shorter chimney top section to make the Kayfun shorter in length.
 
Last edited:
  • Like
Reactions: Bea-FL

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
I don't get the part about not using a chimney. The chimney encloses the coil deck and meters juice flow to the wick through the channels. The narrow top part of the chimney seals to the top cap and delivers vapor to the drip tip. IMO, the chimney is a necessary item.

Maybe I'm missing something, but it looks like a replacement for the part that comes with the Kayfun.
I dont either. I thought I was missing something.
 

Bonskibon

Vaping Master
ECF Veteran
Verified Member
Dec 11, 2015
3,589
8,400
It won't make it any shorter. These are the configurations.
th.jpg
 
  • Like
Reactions: Bea-FL

DaveP

PV Master & Musician
ECF Veteran
May 22, 2010
16,733
42,646
Central GA
  • Like
Reactions: Bonskibon

Jim-

GCS E (1) + V (1) + M (1) = 3
ECF Veteran
Verified Member
Dec 18, 2013
1,329
5,811
Los Angeles County, Ca. USA

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
I have 6 or 7 Kayfuns (Lite V2 and 3.1's). They all came with the long clear tube and the short one. I use the short tube, but have used the long tube at times. IMO, you need some way to view juice level. With the short tube I just flip the tank horizontal to get a true reading on juice left.

I don't get the part about not using a chimney. The chimney encloses the coil deck and meters juice flow to the wick through the channels. The narrow top part of the chimney seals to the top cap and delivers vapor to the drip tip. IMO, the chimney is a necessary item.

Maybe I'm missing something, but it looks like a replacement for the same part that comes with the Kayfun. If there's a shorter one that makes the entire atomizer shorter, then they would need to include a shorter chimney top section to make the Kayfun shorter in length.

If you use a Kayfun Mini bell cap. I recommended the Kayfun Monster Mini V3 the $5.43 Atomizer at Fasttech.

It doesnt use either the standard or nano chimney. The barrel screws directly in the bell cap.
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
There are Kayfun Mini models that hold 2ml juice. For me, that's too many refills in a day. I vape 10 or 12 ml a day and that seems to be the norm.

Kayfun Mini V3 Clone $14.99 | Vaping Cheap

The Kayfun Monster Mini V3 $5.43 at Fasttech uses NO chimney. Just the barrel you can use the Lite Plus base or the Monster Mini V3 base. It holds 2.5 ml, and is only 30 mm tall not counting tge 510 or drip tip.
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
This is just the clear tube portion of the tank and a lot shorter than the one that comes standard with the K lite. Steam Tuners calls it Tiny Clear and says this about it: … fits on the atomizer without using any chimney. Due to its super nano dimensions, gives the atomizer a tiny look that fits great even with the smallest mods.

Has anyone tried it? Comments?

I found it for sale at Kayfun Small Clear Tank Tube | Madvapes

If you look at my Avatar you will see one of the smallest Kayfun profiles available.

It is only 30 mm tall not counting the 510 and the drip tip.

Here is where i get those bell caps

$1.69 Free Shipping Replacement Acrylic Bell Cap for Kayfun Mini RTA Atomizer (Kayfun Mini Bell Cap, Acrylic, Pink) at m.FastTech.com

It holds 2.5 mls ejuice.

I switch out the bases when my vaping needs changes.

Kayfun lite plus base when i want Mouth to Lung.

Kayfun Monster Mini V3 base when i want direct lung vaping.
 
  • Like
Reactions: Bea-FL

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
This is just the clear tube portion of the tank and a lot shorter than the one that comes standard with the K lite. Steam Tuners calls it Tiny Clear and says this about it: … fits on the atomizer without using any chimney. Due to its super nano dimensions, gives the atomizer a tiny look that fits great even with the smallest mods.

Has anyone tried it? Comments?

I found it for sale at Kayfun Small Clear Tank Tube | Madvapes

Here is a complete RTA for $5.43 at Fasttech. Been vaping this beastie about a year.

$5.43 Free Shipping Kayfun Monster Mini V3 Styled RTA Rebuildable Tank Atomizer (2.5ml) (Monster Mini V3, SS + PMMA, Pink (fuzzy)) at m.FastTech.com

If you're Interested i would recommend starting here then in tge same Fasttech order pick up a Kayfun lite plus base, and a few of the spare bell caps i sent earlier.

I started using these because i almost broke a glass Tank on my Goblin Mini.

The only part of this that WILL break is tge bell cap. You can replace the bell cap for $1.60 each.

LOVE the little beastie.
 
  • Like
Reactions: Bea-FL

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
There are Kayfun Mini models that hold 2ml juice. For me, that's too many refills in a day. I vape 10 or 12 ml a day and that seems to be the norm.

Kayfun Mini V3 Clone $14.99 | Vaping Cheap

I hate those.

They are seriously flawed two ways.

1. Top filled if your O rings are weak or you don't screw on top tightly IT WILL LEAK. Mine leaked like crazy because weak O rings. Had to turn off the Juice flow to stop the leaking.

2. That dumb wall around the deck makes building way harder to get tge tails of the wick just where they are supposed to be.
 
  • Like
Reactions: DaveP

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
It won't make it any shorter. These are the configurations. View attachment 593181
Right. The clear tsnk on the Right id known as the M Tank. To use this you need both the barrel and standard chimney.

The Kayfun in my Avatar uses only the barrel without any chimney

Not counting the 510 and drip tip it is only 30 mm tall.
 
  • Like
Reactions: Bonskibon

Bonskibon

Vaping Master
ECF Veteran
Verified Member
Dec 11, 2015
3,589
8,400
Here is a complete RTA for $5.43 at Fasttech. Been vaping this beastie about a year.

$5.43 Free Shipping Kayfun Monster Mini V3 Styled RTA Rebuildable Tank Atomizer (2.5ml) (Monster Mini V3, SS + PMMA, Pink (fuzzy)) at m.FastTech.com

If you're Interested i would recommend starting here then in tge same Fasttech order pick up a Kayfun lite plus base, and a few of the spare bell caps i sent earlier.

I started using these because i almost broke a glass Tank on my Goblin Mini.

The only part of this that WILL break is tge bell cap. You can replace the bell cap for $1.60 each.

LOVE the little beastie.
That base reminds me of my Nebula Wine tank. Are they similar do you know?
 

Two_Bears

Vaping Master
ECF Veteran
Verified Member
Jul 4, 2015
7,045
16,673
Northern Arizona
That base reminds me of my Nebula Wine tank. Are they similar do you know?
Virtually identical. I have used both the Monster and Nebula Wine.

The Nebula is easier to build for the way it traps the leads.

I LOVE the Nebula Wine but can't use it. The Nebula whistles on inhale at a frequency that irritates my ruptured eardrum.
 
  • Like
Reactions: Bonskibon

Bonskibon

Vaping Master
ECF Veteran
Verified Member
Dec 11, 2015
3,589
8,400
Virtually identical. I have used both the Monster and Nebula Wine.

The Nebula is easier to build for the way it traps the leads.

I LOVE the Nebula Wine but can't use it. The Nebula whistles on inhale at a frequency that irritates my ruptured eardrum.
Yeah, I hear that about them. I haven't used mine yet, but have heard of ways to plug up the airflow some and reduce the noise. I have a ruptured eardrum myself.
 

Bea-FL

Vaping Master
ECF Veteran
Verified Member
Jul 7, 2016
3,094
62,467
Florida
Here is a complete RTA for $5.43 at Fasttech. Been vaping this beastie about a year.

$5.43 Free Shipping Kayfun Monster Mini V3 Styled RTA Rebuildable Tank Atomizer (2.5ml) (Monster Mini V3, SS + PMMA, Pink (fuzzy)) at m.FastTech.com

If you're Interested i would recommend starting here then in tge same Fasttech order pick up a Kayfun lite plus base, and a few of the spare bell caps i sent earlier.

I started using these because i almost broke a glass Tank on my Goblin Mini.

The only part of this that WILL break is tge bell cap. You can replace the bell cap for $1.60 each.

LOVE the little beastie.
@Two_Bears I read your blog/review on the monster and ordered one plus extra glass tank. And if you remember you recommended the lite plus a while back so I have it too. Now I just need a couple of those little short bell caps.
 
Status
Not open for further replies.

Users who are viewing this thread