Kgo VV help , Not working.

[RobbieVap]

out of nowhere my kgo vv stopped working , i didnt overcharge , drop or anything.

Nothing screwed on the top works , clearomizer , cartomizer , tank etc.

When nothing is on it and I hold the power button , i see a blue ring start glowing inside the part where you would screw a device on .

It charges fine , and the LED's and buttons work , but attaching anything to it , and then trying to vape , absoultely NOTHING happens , its like sucking through a s straw?

What could be the problem , is this fixable?

 

[maccafan]

Most likely the solder on the center pin has come away disconnecting the wire maybe you used too high a voltage on something not of suitable resistance and the heat generated can cause solder to melt.

Best way to check this is to put a multimeter in 20V DC mode and see if you are getting any unloaded voltage between the center pin and the threads. If it is zero then you need to solder the wire back into the center pin.