Killer 705 Clone Air Flow CRY FOR HELP!!

[aeroforce156]

So I've been waiting all week! Ordered 50 preassembled wires with no res leads. 1.8ohm

I was so excited!! I got it built and tried it without the adapter on the bottom. Zmax shows 1.8ohm YAY it's awesome from here...

Wait... No vapor... If I look at the coil and press the button I see vapor cloud the chamber. Take a puff... Zero vapor...

Okay so I rebuilt it. This time I dropped it in a DCT with the adapter... Zero airflow. No airflow... At all... So if I unscrew the adapter to the point where the entire tank wiggles when I shake the device and I can tell it's barely making contact. I get a tiny hint of air passing through and the vapor produced is pretty tasty.. But not worth the terrible drag and jiggling tank...

When I take a drag off the device plenty of air. So I'm assuming air only goes through the bottom on the adapter... Can I only use the Killer 705 Clone on an automatic battery? Something with a hole in the 510 connection? Or do I really need to buy some kind of "Air Flow Control" device to use the 705?

I am trying to use it on a mechanical. Tried on sentinel, sigelei #8, KTS Telescope, and Zmax with a normal DCT. Can someone please help. What am I supposed to do??? ( WAHHhhHH plz help.

 

[nelsonm64]

i think i read somewhere thats there's a seal or oring that blocks the airflow. i design flaw apparently, i can't remember where i read it but i'll have a look and see if i can find it again. im talking about the rainbow heaven clone, are you?

 

[nelsonm64]

here it is.

http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/452066-heaven-clone-killer-705-im-loving-2.html

 

[jmarkus]

yeah, theres an insulator on the adjustable 510 pin. it needs to be removed and then all will be totally good with airflow. also, i noticed you need the 510 adapter on to test for vapor...

 

[aeroforce156]

yeah, theres an insulator on the adjustable 510 pin. it needs to be removed and then all will be totally good with airflow. also, i noticed you need the 510 adapter on to test for vapor...

Indeed good sir. You do need the adapter to get vapor... I feel like such an idiot now xD I've read that forum a couple times and just never picked up on them talking about the air flow... A bit of confusion on it too. Just a tiny bit. Using a screwdriver to unscrew the very bottom post of the 510 adapter I removed the rubber insulator. Works like a freaking charm... Such beautiful vapor oh so freaking beautiful....

Thank you ECF for turning a 12$ clone into a million bucks...

 

[nelsonm64]

i had to buy one for 12 bucks.... and its good to know excatly what the airflow issue is, thx jmarkus.