Killer 705 clone conpatibility?

[DuffTime]

Just ordered my first Reo Grand (black crinkle, white door)... so excited! Can't wait for it.

Does anyone know if the Smoktech Terminator (the killer 705 clone from madvapes/gotvapes/exhalevapors) will fit/bottomfeed from on a Reo Grand? I'm looking to have a setup that I can use purely mechanical, so about .8 to 1 ohm, and is bottom feedable.

I'm assuming that if I use it this way I would be doing without the 510-510 extension, and just screwing it directly to the Reo.

Let me know any tips/tricks of using this type of setup, or in general if you guys know some cost effective options to get an rba on top of this device, I would be greatly appreciative!

Vape on and be happy!

 

[FeistyAlice]

Just ordered my first Reo Grand (black crinkle, white door)... so excited! Can't wait for it.

Does anyone know if the Smoktech Terminator (the killer 705 clone from madvapes/gotvapes/exhalevapors) will fit/bottomfeed from on a Reo Grand? I'm looking to have a setup that I can use purely mechanical, so about .8 to 1 ohm, and is bottom feedable.

I'm assuming that if I use it this way I would be doing without the 510-510 extension, and just screwing it directly to the Reo.

Let me know any tips/tricks of using this type of setup, or in general if you guys know some cost effective options to get an RBA on top of this device, I would be greatly appreciative!

Vape on and be happy!

Don't know about the Killer clone but I have four Killers. Killers fit all REOs except the rare 801 connection Woody And special order Woodvils. On Killer, when you take the proprietary adapter off you will see the GIGANTIC two holes on side of threaded fitting at place you see tiny air intake on factory 510 attys/cartos. As Killer was designed for use in tanks these holes are for allowing juice in to atty from tank. They allow in so much air atty is virtually unvapable. I tried several thing to partially block the holes, none satisfactory for me. So I ordered some removable silicone caulk to play with to mostly close up the holes. I haven't done it yet as the RM2s were released and I love them so much and they require virtually no fiddling so other RBAs have been neglected. I still plan on blocking the holes, at some point, and using them on Mini Woodvils, most with such small diameter catchcups that hardly any other RBA will fit. I love the looks of the really small diameter Killer. I just don't like the height using the adapter. The clone may be different.

Let us hesr about you experience please.

Feisty Alice

BTW.... As the Killer is SS I'll be torching them to look better with wood and brass.

Sent from my SPH-L900 using Tapatalk 2

 

[Rhapsodies Fire]

Welcome DuffTime

I don't know, but I'm sure someone will pop in soon to answer your questions....and I see you found the http://www.e-cigarette-forum.com/forum/reos-mods/377836-reo-compatible-rbas.html thread.

As far as cost efficient RBAs go, there appears to be more and more out there all the time. But please be aware of issues like this. I know there are ERA/Hornet clones that are cheap but some of them are drippers from what I understand. If you have the right equipment, you can modify them to bottom feed. I don't shop RBAs because I'm rather hung up on the RM2 and my husband who does know, isn't here right now...so I'm sorry I can't link you to all the latest RBAs. But I have no doubt there are plenty of Reonauts who can share their knowledge.

 

[DuffTime]

Thanks for all the input! I am looking for a setup that works, so seeing as those holes on the terminator and killer are so similar, I'm just going to shell out for a good and dependable bottom feeding RBA, unless someone chimes in with a success story. I'll probable just go with a REOmizer. Not much into modding my own RBAs

Perhaps I can sell some of these AGAt2s I have sitting around for the cash to buy a REOmizer.... *strokes beard*...

 

[Rictic]

I agree with your choice; I seriously doubt you'll find a better RBA for your REO. I'm positive you won't find a better RBA for around the price of a brand new Reomizer 2. The Chalice II was the only other bottom-feeder RBA I owned that was as good as the RM2, and it was triple the price and slightly more complicated to set up the coil/wick.