Kr808 Batts w/901-Tank

[Jaybearizzi]

I see a few people talk about the elite 808 w/901-T atty. I was wondering if there is any good Kr808 batts other than the elite808 that would be recommended for the 901-T. Read on the cigeasy that I would need to get the elite charger to charge the elite and cant use regular Kr808 chargers. So far I have a V2 cig kr808, Go-Go, and waiting for my new Volt 900mah Maxx Passthrough (still iffy, but is it good to use a tank on a fat batt PT or on the Go-Go?). Any suggestions? Will any Volt/Bloog Batts will work well on it?

 

[CloveHunter]

V2 will work, just be careful of leak (not a problem with 901-T AFAIK, only use 901 for dripping on gen1 KR8 batt)

Volt maxx is kinda picky with 901 atty, not all of 901 attys work with it. Any sealed batt have the same 'pickiness' problem too.

 

[Jaybearizzi]

thanks for the input. Just read that the IGO, VGO, and ECHO might work well with the 901-T atty also.

 

[godAWFUL]

I've been trying to do some research on a set up like this...but I don't even know where to start.

I've been hearing great things about the results, but where can I purchase the actual set up? And would it be problematic on a Volt X2 Manual?

And...most importantly, how the hell does it work?

 

[Jaybearizzi]

I've been trying to do some research on a set up like this...but I don't even know where to start.

I've been hearing great things about the results, but where can I purchase the actual set up? And would it be problematic on a Volt X2 Manual?

And...most importantly, how the hell does it work?

Just google DSE901-tank Atomizers. theres a few sites valuevapor has some and ecigsdiscount does too.

So far from what I've been reading, the DSE901 threading for the atty is the same as the KR808s. so you probably just got to try buying one and see if it fits. I've ordered 1 from ecigsdiscount and hopefully it fits one of my batts or itll work well with the kr808 adapters I bought. I also seen a few youtube vids that sanded off the threading so it'll fit some of the kr808 batts. there isn't really any kits for it. just gotta buy the parts separately. make sure to buy the DSE901-T Cartridges too since they dont come with the DSE901-Tank atomizer!!

 

[CloveHunter]

I've been hearing great things about the results, but where can I purchase the actual set up? And would it be problematic on a Volt X2 Manual?

And...most importantly, how the hell does it work?

Volt X2 (and any sealed gen2 batts) can only use certain 901 atty, SI recommend Spare Atomizer for GP901

Usage is easy, it's called 'direct dripping': drip 2-3 drops directly into the metal mesh inside the atty tube. Then vape away. After 6-8 draw, the vapor will be gone or the taste change, it's time to drip again. That's all. Just don't drip and drive - or you can use cartridge (like cartomizer but without atty, just filler), never try that, so far satisfied with direct drip.

901-T is a bit different. You don't need to drip, you just fill the tank and place it in the atty tube. This should help: BE901-T/DSE901-T tank system e-cigarette manual sheet|901-T e-cigarette instruction booklet

I like the simplicity of KR8 batt + 901 atty, especially for tasting juice. No need to waste cartos on something I probably won't like.

Regarding Volt X2, I don't know which 901-T to use, never try it.

 

[Jaybearizzi]

nice to know about the gen2 batts.