Laser / Flashlight using Li-Ion 14500

[xogul]

I was planning to enter the mod world (this time on e-cigarette) after seeing the ones made by Cisco.
Considering that I will get parts from DX; and I doubt the quality of their electric products, in this case chargers and batteries and that there aren't any protected Li-Ion 10440 (yes, I know about it http://www.e-cigarette-forum.com/forum/battery-mods/40233-promised-10440-protected-cells.html) I intend to use protected Li-Ion 14500 but can't find a laser or flashlight looking like this http://www.e-cigarette-forum.com/forum/modders-forum/35597-510-pen-style-laser-mod.html that uses it.

Is there anyone with such a device modded? Could someone help on my quest, please. DX don't have any, neither focalprice. I'm beginning to think it doesn't exist.
Any kind of device looking like this would be great and the maximum diameter of batteries is 14mm.

 

[Doubledot]

xogul... Here is another mod by Cisco:
h t t p: / / www . e-cigarette-forum.com/forum/modders-forum/27880-yet-another-laser-pointer-mod.html

This would be the next best choice... IMO. I too have searched high and low.

 

[ApOsTle51]

I just bought one of these to see what i can do with it.

True Utility TU28 Single AA led torch ( 14500 should fit fine in it )

 

[xogul]

@ Doubledot
Thank you, but I have them all. Cisco is my Inspiration (don't want to use the 'Muse' term, he might be offended ).

@ ApOsTle51
It's exactly what I seek. Where can I see more detail and price?

 

[NightShadow]

Might this be usefull or one of his other offerings?

Ultrafire C3 Stainless Steel Cree Q5 5-Mode 190-Lumen Flashlight [UltraFire CREE] - $13.00 : High Tech DealZ, Simplifying the LASER Hobby!

It does hold the 14500 battery, and he also sells them. Hellen A. handbasket found this site and even got ecf a 10 percent discount code: HELLENECF10

 

[vendo]

ApOsTle51 : love the sleek lines on that. I have bookmarked a couple of sites to buy one but looking like around £10 delivered so I'll wait and see how you get on with that one first
Good luck

 

[googled]

I just bought one of these to see what i can do with it.

True Utility TU28 Single AA led torch ( 14500 should fit fine in it )

Very nice find, they do a mini version that could* take 10440's too. Both on Amazon uk £10/£5. Could be a mini SB . Hopefully it's moddable.

Edit: check 7dayshop .

 

[xogul]

@ NightShadow
thank you, but the design must be like (+/-) the one ApOsTle51 posted.

Too expensive to convert. I'll have to keep looking.

 

[Bubo]

Could someone help on my quest, please. DX don't have any, neither focalprice. I'm beginning to think it doesn't exist.
Any kind of device looking like this would be great and the maximum diameter of batteries is 14mm.

huh? Am I missing something? I just placed an order with DE - for parts to most of Cisco (The Muse, The Inspiration, The Lathe Worker, THE MAN.....) (No, I don't care if he's offended - he sets the standards for the rest of us!)

Here are the SKU's to look for on DE:
(Well, the ones I ordered anyway..)
14234 0.5mW Red Laser Pointer Pen (2*AAA)
10760 Red Laser Keychain (AAA)
3206 9 White LED Flashlight (Multicolored 7-pack)
16845 Romisen RC-A6 Cree Q5-WC 130-Lumen LED Flashlight - Grey (2*AAA)
27551 Aluminium Alloy Pill Shaped Keychain

And be nice everyone - make sure my order ships before you order!

 

[QueenInNC]

I just bought one of these to see what i can do with it.

True Utility TU28 Single AA led torch ( 14500 should fit fine in it )

Looks nice, ApO!

 

[xogul]

huh? Am I missing something?

yes, the part where I wrote 14500 battery (aprox. AA size).
all your options are AAA (flashlights) or 10440 battery.
I want to use protected batteries so 14500 is the smaller choice.

but thank you, anyway.

 

[Bubo]

Ooops! My bad!
Oh well, now there is a quick list of Cisco's parts anyway...

 

[xogul]

off topic

Following this link 27551 Aluminium Alloy Pill Shaped Keychain
posted previously by Bubo, I found this DealExtreme: $3.00 Shiny Silver Kettle Keychain (lighter liquid container).

Just cross my mind that it could serve as an e-juice container. but on the other hand do I want my e-liquid in touch with a metalic surface?. what do you guys think?.

 

[Bubo]

Hmmm... I wouldn't have a problem storing my juice in there, but I don't think that it would flow out of the nozzle. Oh wait - there is an air hole there.... But eJuice (at least mine) is much thicker viscosity than lighter fluid....

But hell - for $3, why not try it! If nothing else, it's a pretty little case!

 

[vendo]

I just bought one of these to see what i can do with it.

True Utility TU28 Single AA led torch ( 14500 should fit fine in it )

How did this work out Apo?

 

[ApOsTle51]

I got the TU28 a few days ago , very nice torch but the thing is huge for a AA torch , measurse nearly 5 inches long, and the AA is a snug fit width wise in it. I was hoping it would have been alot smaller.

Granted it's a well made torch , the casing is about 1mm thich and all very nicely machined but it's just to big for a single 14500 mod...

I also got one of these

TRUE UTILITY - LED Micro Torch

a 10440 fits width wise but about 10mm too long, I'd need to mod the switch to make it take up less room in the body , It looks possible but it'll be tight.
It's about the same size as the laser mod body , just looks nicer..

Back to the searching.

 

[vendo]

Oh well I'll be in the same boat as you then I couldn't resist and bought one anyway in black for £6. This one might have to stay in my toolbag for a change.
If I change my mind, and listen to the voices, I'll let you know how I got on with it
Good luck with that smaller one.