lavatube batteries

[hubahuba]

Just preordered my lavatube from ecigwizard and I'm wondering if AW 18650 2900mAh batteries work on this mod. It seems that they don't have the nipple on the positive end. Is that an issue?

 

[Sugar_and_Spice]

You could use a spacer or a earth(I think magnet)....Check the vendor website for descriptions of what size battery the lavatube takes and try to find pictures...
good luck



edit---this is from the ecigwizard website.....

A note on 18650 batteries: 18650 batteries are 18mm in diameter and 65mm in length, hence the 18650 name. This device will work with all design spec 18650 batteries. What we mean by this is if your 18650 battery is longer than it should be (65mm) it may be too big, the nipple quite often pushes certain batteries over the 65mm size. The following batteries sold by us will work with the Lavatube: Lavatube 18650, High Drain 18650.

 

[B4DJ1N64N]

It's not about the nipple, but the length could be a problem. Trustfire batteries & the AW 18650 2900mAh are protected batteries, share a common length. The lavatube uses IMR batteries just like a Provari, shorter than the protected batteries (about 2mm).