This is my impressions of the mini and regular StarFire VV kits from ECigCharleston. These are the version 2 VTubes not the 1.5 version.
Direct link
www.VapeNexus.com
Direct link
www.VapeNexus.com
LavaTube Knight Rider Version 2 Review
- Thread starter Optimo
- Start date
- th_trl_thread_readers 0
- Status
Thanks for the heads up on these units. I am a bit skeptical considering what happened to the V1.5.
No problem....these won't cause fires or fire your atty while not in use. I've put both the mini and the standard one through all the paces and then some. They perform like a champ.
Hello Optimo,
I do really like your posts and video product reviews. I think you are honest, no matter if you bought it or got it for free.
And that's what I like, down to earth honesty, the real deal . Do or die-- sink or swim , you just call it like you see it.
So I did go to Ecig Charleton to see the Star Fire VV and that's it ! what I've been looking for a vv with at least 3.5 ohms, and this is 3.9 ohms. Helps to run low resistance atomizers / carts......so I'm thinking a 1.0 ohm to a 5 ohm or what ever will run the 3-6 volt range. Just one thing I would like is a chrome or stainless steel finish....
I have the chrome version with the original circuitry , it drops the volts on a 2.5 to 3.0 ohm atomizer to like 4.3v or so when you try to run 6volts. I tested and I have had it cut back to 3.7volts , with the amp limit then it protects your atomizer/carto
from poping or burning out....
You know I would rather burn the atomizer up quicker at the volts I choose, that it over ride what I want to run it at. !
Like I want to run 4.7v or 5.3v or 6.0v or what ever , and get what it says on the LCD that I choose.
The chrome is nice and looks good with my new Odysseus , and works rather well too.
But after watching your video and getting more info at the site , and you run everything with it and said it performs like a champ , So I ordered the kit , it's cheaper than just the unit and buying 2 battries. And I like that it tells your resistance / ohms on whatever your running on it.
I get the Star Fire vv unit a case a charger , 2 batteries , and 5 Smok Tech 510 Cartomizers, and I choose the 3.2 ohm to be sure to run the whole voltage range. I have never used a catomizer befor only atomizers , to drip , with cartriges or with a tank ! so that will be a thing to try for me....... All For $69.99 AND $1.99 Shipping , I Think It's A GOOD DEAL !!!!!!!!!!!!!!
So all in all, I thank you for your honest reviews and information ! And I can't wait to get my new vv mod that runs everything you throw at it !
Thank You Very Much ! ! ! !
I do really like your posts and video product reviews. I think you are honest, no matter if you bought it or got it for free.
And that's what I like, down to earth honesty, the real deal . Do or die-- sink or swim , you just call it like you see it.
So I did go to Ecig Charleton to see the Star Fire VV and that's it ! what I've been looking for a vv with at least 3.5 ohms, and this is 3.9 ohms. Helps to run low resistance atomizers / carts......so I'm thinking a 1.0 ohm to a 5 ohm or what ever will run the 3-6 volt range. Just one thing I would like is a chrome or stainless steel finish....
I have the chrome version with the original circuitry , it drops the volts on a 2.5 to 3.0 ohm atomizer to like 4.3v or so when you try to run 6volts. I tested and I have had it cut back to 3.7volts , with the amp limit then it protects your atomizer/carto
from poping or burning out....
You know I would rather burn the atomizer up quicker at the volts I choose, that it over ride what I want to run it at. !
Like I want to run 4.7v or 5.3v or 6.0v or what ever , and get what it says on the LCD that I choose.
The chrome is nice and looks good with my new Odysseus , and works rather well too.
But after watching your video and getting more info at the site , and you run everything with it and said it performs like a champ , So I ordered the kit , it's cheaper than just the unit and buying 2 battries. And I like that it tells your resistance / ohms on whatever your running on it.
I get the Star Fire vv unit a case a charger , 2 batteries , and 5 Smok Tech 510 Cartomizers, and I choose the 3.2 ohm to be sure to run the whole voltage range. I have never used a catomizer befor only atomizers , to drip , with cartriges or with a tank ! so that will be a thing to try for me....... All For $69.99 AND $1.99 Shipping , I Think It's A GOOD DEAL !!!!!!!!!!!!!!
So all in all, I thank you for your honest reviews and information ! And I can't wait to get my new vv mod that runs everything you throw at it !
Thank You Very Much ! ! ! !
Last edited:
Hello Optimo,
I do really like your posts and video product reviews. I think you are honest, no matter if you bought it or got it for free.
And that's what I like, down to earth honesty, the real deal . Do or die-- sink or swim , you just call it like you see it.
So I did go to Ecig Charleton to see the Star Fire VV and that's it ! what I've been looking for a vv with at least 3.5 ohms, and this is 3.9 ohms. Helps to run low resistance atomizers / carts......so I'm thinking a 1.0 ohm to a 5 ohm or what ever will run the 3-6 volt range. Just one thing I would like is a chrome or stainless steel finish....
I have the chrome version with the original circuitry , it drops the volts on a 2.5 to 3.0 ohm atomizer to like 4.3v or so when you try to run 6volts. I tested and I have had it cut back to 3.7volts , with the amp limit then it protects your atomizer/carto
from poping or burning out....
You know I would rather burn the atomizer up quicker at the volts I choose, that it over ride what I want to run it at. !
Like I want to run 4.7v or 5.3v or 6.0v or what ever , and get what it says on the LCD that I choose.
The chrome is nice and looks good with my new Odysseus , and works rather well too.
But after watching your video and getting more info at the site , and you run everything with it and said it performs like a champ , So I ordered the kit , it's cheaper than just the unit and buying 2 battries. And I like that it tells your resistance / ohms on whatever your running on it.
I get the Star Fire vv unit a case a charger , 2 batteries , and 5 Smok Tech 510 Cartomizers, and I choose the 3.2 ohm to be sure to run the whole voltage range. I have never used a catomizer befor only atomizers , to drip , with cartriges or with a tank ! so that will be a thing to try for me....... All For $69.99 AND $1.99 Shipping , I Think It's A GOOD DEAL !!!!!!!!!!!!!!
So all in all, I thank you for your honest reviews and information ! And I can't wait to get my new vv mod that runs everything you throw at it !
Thank You Very Much ! ! ! !
No problem Mrgoodwrench
sorry it took me so long to reply, I have been a bit busy. Looks like you made a good choice...you should be really happy with it. I'm the same way I would rather burn up my atomizer than have my voltage limited anyday. When you get it if you have any questions or anything just shoot me a PM and I will be glad to help out. Thanks for the kind words happy vaping!
The website did say 3.9 now it says 3.0 amps , anyway like you said it is way better than the first Lava Tubes ! This one will
fire anything.
Do you remember the video you did on how to make your atomizer/ cartomizer last longer or to refreash it by cooking it or something ? Like you fire it till it's red a few times or something like that ? and that makes it vape good again.
And I totally understand your being busy , no problem buddy . and you welcome for the kind words, you deserve them for the great job you do , a public service !! AWESOME
Thanks & Take Care !
- Status
Similar threads
