Let's Talk Hardware
- Thread starter Pappy
- Start date
- th_trl_thread_readers 0
- Status
Ok, gave it a good ultrasonic bath with some Chopin vodka, rinsed and dried. Went with dual micro .28 with 5/6 wraps that came in at .65 ohms running ~21watts. Set it up on the second/middle air hole and it's kicking pretty hard. Very smooth vape. Great flavor. Thanks for the recommendation.
Thanks Calve , it sounds good , it's definitely different from everything else out there .
Retic, I've been vaping on this all day and it keeps surprising me. It's rivaling the Herron in flavor and it's such a warm, smooth vape. This shot is after 9 refills with HHV. All different flavors.
Sent from my SM-N900P using Tapatalk
Retic, I've been vaping on this all day and it keeps surprising me. It's rivaling the Herron in flavor and it's such a warm, smooth vape. This shot is after 9 refills with HHV. All different flavors.
Sent from my SM-N900P using Tapatalk
Awwww Dam ! I feel a case of shineyitis coming on ! It sounds awesome , and those deep wells on it really have my attention , I'm always overfilling the IGO to the point of juice running out of the airholes , the Magmas design just makes sense to me . I'm glad you're enjoying it , now to get my hands on one !
New toy.......,Hana V3
Tapatalked from my LG-G2
I love my Hana Mini....
Glad to hear you like the Magma, Calve.
I put one on order this weekend and can't wait to try it out. I really like the Zenith V2, but it doesn't hold a lot of juice (nor was it designed to). I'm thinking I'll put the Magma on my tiny little Vapor Shark and go further between drips. I have a KFL on it now and it's just too top heavy and weird looking for my taste. Of course, the KFL can lie on its side with no worries, but . . .
Now that I have multiple 22mm drippers here or on the way here, I had to order another mech mod so I can put the Lord Estia back where it belongs. I spent two or three days at mmvapors.com trying to come up with a Nanos combo that my wallet and I can agree on. I want nearly all combos and my wallet said I can have one. So we compromised and I bought two (and I think I snuck in a spare tube or two).
I put one on order this weekend and can't wait to try it out. I really like the Zenith V2, but it doesn't hold a lot of juice (nor was it designed to). I'm thinking I'll put the Magma on my tiny little Vapor Shark and go further between drips. I have a KFL on it now and it's just too top heavy and weird looking for my taste. Of course, the KFL can lie on its side with no worries, but . . .
Now that I have multiple 22mm drippers here or on the way here, I had to order another mech mod so I can put the Lord Estia back where it belongs. I spent two or three days at mmvapors.com trying to come up with a Nanos combo that my wallet and I can agree on. I want nearly all combos and my wallet said I can have one. So we compromised and I bought two (and I think I snuck in a spare tube or two).
what color do you have? I would like to see a dual 18650 version. 1 just isnt enough juice for a day. Does the mini take one 18500?
Tapatalked from my LG-G2
My hardware caddy. 5 working mods of Heavenly Joy. Or in the words of Big Twist and the Mellow Fellows..."Hoy Hoy, baby I'm your boy, 300lbs, of Heavenly Joy...
All 5 are within arms reach. Left to right: Crackberry, Pirates Booty, Dragons Fire, CAT and Legend. Life is GOOD!
All 5 are within arms reach. Left to right: Crackberry, Pirates Booty, Dragons Fire, CAT and Legend. Life is GOOD!
Look like a bucket buddy..one of those canvas thingies you slip over a 5-gallon bucket so you can store your tools.
R
*RJ*
Guest
Your new avatar is a much better motivator than the brownies David.
You sure you don't look like that already?
R
*RJ*
Guest
I had an Idea on how to wrap coils a bit easier than trying to wind wire around a shaft....
so I thought about it and tried out a prototype winding jig... very simple device, basically a brass tube with a slot cut in the end
you insert wire into the slot and twist the tube, holding the wire steady with a bit of tension
and you continue to twist/twirl/turn the tube untill you get the number of wraps you desire
once you have the number of turns you want, simply slide the coil off of the end of the tube.....
no more wrapping the wire "around" the form, just spin the form/tube and let the wire "wrap" onto it...
nice tight coils....
I got the brass tube from a hobby shop for about a $ they come in several sizes.... I cut the slot with a Dremel disc
Remember... you saw it here first!! a BK original
so when you come across a RipT video saying how awesome this is.... you can say BK did it first
so I thought about it and tried out a prototype winding jig... very simple device, basically a brass tube with a slot cut in the end
you insert wire into the slot and twist the tube, holding the wire steady with a bit of tension
and you continue to twist/twirl/turn the tube untill you get the number of wraps you desire
once you have the number of turns you want, simply slide the coil off of the end of the tube.....
no more wrapping the wire "around" the form, just spin the form/tube and let the wire "wrap" onto it...
nice tight coils....
I got the brass tube from a hobby shop for about a $ they come in several sizes.... I cut the slot with a Dremel disc
Remember... you saw it here first!! a BK original
so when you come across a RipT video saying how awesome this is.... you can say BK did it first
Last edited:
I had an Idea on how to wrap coils a bit easier than trying to wind wire around a shaft....
so I thought about it and tried out a prototype winding jig... very simple device, basically a brass tube with a slot cut in the end
View attachment 350697
you insert wire into the slot and twist the tube, holding the wire steady with a bit of tension
View attachment 350698
and you continue to twist/twirl/turn the tube untill you get the number of wraps you desire
View attachment 350699
once you have the number of turns you want, simply slide the coil off of the end of the tube.....
no more wrapping the wire "around" the form, just spin the form/tube and let the wire "wrap" onto it...
nice tight coils....
I got the brass tube from a hobby shop for about a $ they come in several sizes.... I cut the slot with a Dremel disc
Remember... you saw it here first!! a BK original
so when you come across a RipT video saying how awesome this is.... you can say BK did it first
So when are you gonna build the AC powered version for the weak wristed ?
So when are you gonna build the AC powered version for the weak wristed ?
Just stick it in a drill.
Just stick it in a drill.
that will work.... use the slow speed tho
or you will end up with a 43 turn coil
- Status
Similar threads
- Locked
- Locked
