Let's Talk Hardware

[MwSlim]

Am I seeing 50W at .3ohms there?

What juice are you running through at that wattage? What rda and coil config as well?

Yep 50w its as far up as Ive gone with it so far. Its a .27Ω dual coil on my Veritas. The juice is maxVG Rear Diff from Boosted EJuice

Slim,
Good to see you're still posting (I don't venture out much, in case you post frequently elsewhere).

Nice toys, and that juice label has my interest as well - something pumpkin... Possibly a seasonal juice from... ?

One hundred watts, wow. Call me chicken, but I don't think I've ever gotten close to 20W.

I havent posted much at all lately. Real life keeps getting in the way lol

The juice is a pumpkin spice with cream and graham cracker. Pretty good stuff

3mg is where I'm at to drip now. Anything more I'm freaking dying!!

Slim when you ready to trade that 100watt hit me up lol

Sent from my SAMSUNG-SGH-I747 using Tapatalk

This one might stay in my collection for awhile bro

 

[MwSlim]

Craig is that a TiD box too? I absolutely love mine, its a beast

 

[MrPicC]

Craig is that a TiD box too? I absolutely love mine, its a beast

Its a twisted jester box. They hang on vape chat. MOSFET and all.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

 

[retic1959]

A lovely and gracious young lady has offered to loan me her ProVari Mini to try out. I have plenty of 18350 batteries, I stack them inside my VV Grands. But I will need an attachment, something not too expensive and compatible with a ProVari Mini. Any ideas ?

Papaw , I don't know what you mean by not too expensive but I've had good results with Hcigar . HCigar Kayfun Lite Plus V2 Atomizer Clone

 

[DavidOH]

Well now the KFL comes with 2 air holes. It's an Ehpro.

http://www.vapnificent.com/kayfun-lite-plus-v2-dual-air-hole-upgrade/

 

[retic1959]

Well now the KFL comes with 2 air holes. It's an Ehpro. http://www.vapnificent.com/kayfun-lite-plus-v2-dual-air-hole-upgrade/

The only problem with that is you can only get so much air through the center post no matter how many holes you drill in the base . Do you know if they modified the center post too David ?

 

[DavidOH]

The only problem with that is you can only get so much air through the center post no matter how many holes you drill in the base . Do you know if they modified the center post too David ?

it doesn't appear that they did from what I can find.

 

[PapawBrett]

They both look nice. Since I'm 'loaned' a ProVari Mini, would the Kayfun clone or the Aspire Nautilus (either BDC or BVC) be better just to try out a ProVari ?

 

[Bronze]

They both look nice. Since I'm 'loaned' a ProVari Mini, would the Kayfun clone or the Aspire Nautilus (either BDC or BVC) be better just to try out a ProVari ?

Go all the way Pop and get the KFL clone. You know how to build atomizers.

 

[retic1959]

They both look nice. Since I'm 'loaned' a ProVari Mini, would the Kayfun clone or the Aspire Nautilus (either BDC or BVC) be better just to try out a ProVari ?

Since you're already rebuilding I'd go with the Kayfun clone paying $2.50 for a single replacement coil will get old quick and I would imagine if you can rebuild the BVC I'm sure it'll be a royal PITA to do it .

 

[retic1959]

it doesn't appear that they did from what I can find.

The price is good , at least they're not charging for the modification , I've thought about getting a FT kayfun and drilling out the airflow port and juice channels just for S&G to see how far you can take it without destroying the balance between the two .

 

[PapawBrett]

Go all the way Pop and get the KFL clone. You know how to build atomizers.

Yea, the Hornet and the RM2 taught me that.
Next question; with these Kayfun clones, do you need a syringe or a fill bottle ? I don't have either...

 

[DavidOH]

Yea, the Hornet and the RM2 taught me that.
Next question; with these Kayfun clones, do you need a syringe or a fill bottle ? I don't have either...

I fill mine with the HHV bottle.

 

[Bronze]

Yea, the Hornet and the RM2 taught me that.
Next question; with these Kayfun clones, do you need a syringe or a fill bottle ? I don't have either...

There are some who use their drip tip that comes with the bottle. Ask Chak how he does it. I think he just slaps the thing right in the fill hole and squeezes it in. FYI: There has to be a small air pocket remaining with each KFL fill...for vacuum (half a pea size is fine). I use a syringe.

EDIT: David confirms

 

[retic1959]

Yea, the Hornet and the RM2 taught me that. Next question; with these Kayfun clones, do you need a syringe or a fill bottle ? I don't have either...

You should be able to fill straight from the bottle or you can always fill through the top . Papaw if you don't need or want all the bells and whistles you can save yourself 10 bucks by going with the Ehpro that David listed , the Hcigar comes with the nano tank in addition to the regular tank , the two should be close in quality .

 

[PapawBrett]

Sounds like the Ehpro. Since I'm loaned (with the option to buy) a black mini, maybe I'll get the black Ehpro. Thanks, will have more questions when I get all this together... like what ohms, vertical or horizontal builds, etc.

Crap. The link David gave me, black and silver are sold out.

 

[Bronze]

Sounds like the Ehpro. Since I'm loaned (with the option to buy) a black mini, maybe I'll get the black Ehpro. Thanks, will have more questions when I get all this together... like what ohms, vertical or horizontal builds, etc.

How are you building your RM2's Pop?

 

[PapawBrett]

How are you building your RM2's Pop?

Horizontal, 1.4 to 1.5 ohms for Grand, 2.2 to 2.5 for my VV Grands. Do you have to wrap the wire around the post screws, or is there a port to pass the wire through then screw down onto the wire ?

 

[retic1959]

Horizontal, 1.4 to 1.5 ohms for Grand, 2.2 to 2.5 for my VV Grands. Do you have to wrap the wire around the post screws, or is there a port to pass the wire through then screw down onto the wire ?

You have to wrap the wire around the post screws on the KFL + , it's still an easy build though , your 1.4-1.5 horizontal build will be perfect for the Provari and the Kayfun .

 

[retic1959]

Papaw , Vape Royalty has the Hcigar version in black if you want it , it's more expensive but it is a solid atty , Hcigar does some first rate machining . HCigar Black Kayfun Lite Plus V2 Atomizer Clone