Let's Talk Hardware

[Bronze]

Well thought I was a big girl today and built a 1.2ohm coil for my microstick....have never built that low but it's hitting awesome...KFL mini clone

Where did you get your mini clone and who makes it?

 

[Iowa Gal]

Made by Ivogo purchased at Angelcigs.com. They are only around $20.00. When built right the vape is awesome..plastic tank leaves a little to be desired after a few months of use..worth a try in my opinion

 

[retic1959]

The only thing I have Infinite is my Plume Veil. Seems to be fine (once I got past the stuck delrin insert and the worthless drip tip). But the main device is high quality. Haven't really used it much though because the Veritas blows it away. That said, if there were some boys looking to use up some of their extra testosterone I would recommend the Plume Veil first. That thing could compete in cloud chasing contests to be sure.

The only other dripper I'll order will be the 30mm Magma to match the big Panzer , I was relieved to see SXK producing them , again I've seen complaints on Tobeco Magma clones , go figger .

 

[Bronze]

Made by Ivogo purchased at Angelcigs.com. They are only around $20.00. When built right the vape is awesome..plastic tank leaves a little to be desired after a few months of use..worth a try in my opinion

Found it! Yeah, $20...how wrong can you go?

I see they sell retic's Rose there too.

 

[retic1959]

Found it! Yeah, $20...how wrong can you go? I see they sell retic's Rose there too.

Decent price on the Rose clone there , but that version has an issue , the airflow inlet is drilled in the wrong location so the best you can get is either 3/4 airflow or remove the afc control , it doesn't look right without IMO or dremel/drill it out . I paid more for the Infinite version but it's flawless , everything is as it should be , no modifications needed .

 

[Bronze]

retic, here's something that looks like a whole lotta fun. I don't have a 26650 though. Made by ihybrid (same as Veritas). Two juice wells to mix flavors? Quad coil...can dual coil each flavor. Air flow behind the coils. This thing looks like a locomotive!

iHybrid - Dogbone 26650 atomizer – localvape

 

[retic1959]

retic, here's something that looks like a whole lotta fun. I don't have a 26650 though. Made by ihybrid (same as Veritas). Two juice wells to mix flavors? Quad coil...can dual coil each flavor. Air flow behind the coils. This thing looks like a locomotive! iHybrid - Dogbone 26650 atomizer – localvape

That's perfect for BK's wife , she can mix till her heart's content without trashing his HHV juices . It looks like two Veritas's back to back , but $150 is too rich for me but a clone could be fun though for sure .

 

[Bronze]

That's perfect for BK's wife , she can mix till her heart's content without trashing his HHV juices . It looks like two Veritas's back to back , but $150 is too rich for me but a clone could be fun though for sure .

That's pretty much what it is (dual Veritas). Probably made from a casting.

 

[Iowa Gal]

OMG I'm exhausted but the game is tied with 5min left

 

[LAwaters]

Bronze and LA , there is another alternative to EhPro and Tobeco now for the Veritas , if I wanted a Veritas I'd have to give this one a shot . https://www.vapingwalrus.com/veritas-clone

Infinite! Yes indeed. That one would be worth picking up. And the drip tip is much nicer than the one that came with the EHPro.

I've had no problems with my EHPro Veritas. Works like a champ. But Lori had a problem with each of hers. Sounds like she worked around the first one OK, but this second one is being a pain.

Another nice find retic.

Veritas 2 appears to finally be clean. I had to boil it in distilled water for about 10 - 15 minutes. Then 5 minutes bathing in alcohol. Then another 5 -10 minutes of boiling in fresh distilled water. It dried while I napped. I rebuilt both of them with 28 ga. Veritas 1 is at 1.2 ohms. Back to vaping bliss there. Veritas 2 (maybe I'll call it Pigpen) is built to 1.4 ohms and is vaping great and tasting fine on the Provari. I think the complete tear down was needed. The positive pole and possibly the channel it runs through are the likely culprits for hiding more of that horrible grease. That was a bad, bad taste.

I will go back to avoiding EHPro products. From now on it's HCigar or Infinite. As Retic said, they have been flawless. Thanks to all for your help and suggestions.

 

[MwSlim]

Ill just leave this here in case any of you want an inexpensive authentic veritas and a bunch of juice

 

[Chakris]

Well thought I was a big girl today and built a 1.2ohm coil for my microstick....have never built that low but it's hitting awesome...KFL mini clone

A KayFun Lite Mini? Or just a KFM-ini?

Made by Ivogo purchased at Angelcigs.com. They are only around $20.00. When built right the vape is awesome..plastic tank leaves a little to be desired after a few months of use..worth a try in my opinion

Did you get the black or the SS? Love my Mini - use it daily for fruits and non NETs. I was thinking about getting another one, but couldn't find a clone. Nice find IG! Do you know if they ship out of State? Way out of State, that is. Hee Hee

Found it! Yeah, $20...how wrong can you go?

I see they sell retic's Rose there too.

Yup, and only $23.75, but I don't see the elk...

 

[Chakris]

I typed up a list of Pros & Cons for the ZNA clone and posted it on the ZNA thread. Here's the link if anyone wants to check it out. It looks long, but most of the gripes are minor.

http://www.e-cigarette-forum.com/fo...17-zen-zna-clones-coming-14.html#post14402960

 

[Iowa Gal]

KFL mini and I've had both the SS and Black...slightly prefer the black. After a few months of use the plastic tank on the SS broke..I will replace eventually. Not sure about shipping...Angelcigs is a Chinese company with a warehouse in US. I don't use the full port always fill from top. There is a good video on YouTube by Candy on the Ivogo and Ruby Roo on the authentic Kayfun mini. For the price the clone is a winner. ISU lost by a field goal at end of the game.

 

[LAwaters]

I typed up a list of Pros & Cons for the ZNA clone and posted it on the ZNA thread. Here's the link if anyone wants to check it out. It looks long, but most of the gripes are minor.

http://www.e-cigarette-forum.com/fo...17-zen-zna-clones-coming-14.html#post14402960

Nice, thorough list, Chak. My ZNA Lite's body is not flush with the tube either. The tube is longer by about 1 mm. You mentioned removing the washer from inside the positive screw. Was that the one where the battery connects? If so, just be sure to put the battery in correctly. That one is a mechanical means of reverse battery protection. A reversed battery will fry the board.

 

[DavidOH]

So I just did a mod to one KFL. I took a drill bit. 1/16 I think and ran it through the center post and the air intake holes in the post. Not sure it'll help because it didn't remove much. But they do look bigger. I'll find out after a soak. It was more like reaming the hole out than drilling it.

Was planning on a lower ohm build but I think I'll keep the same so I can tell of I'm getting more air.

 

[retic1959]

A KayFun Lite Mini? Or just a KFM-ini? Did you get the black or the SS? Love my Mini - use it daily for fruits and non NETs. I was thinking about getting another one, but couldn't find a clone. Nice find IG! Do you know if they ship out of State? Way out of State, that is. Hee Hee Yup, and only $23.75, but I don't see the elk...

Chak , Angelecig charges for shipping now , FT carries the Ivogo KFM .

 

[Calve]

Retic,

Did you ever post the details on the build you nailed down on the Rose?

 

[Bimini Twist]

KFL mini and I've had both the SS and Black...slightly prefer the black. After a few months of use the plastic tank on the SS broke..I will replace eventually. Not sure about shipping...Angelcigs is a Chinese company with a warehouse in US. I don't use the full port always fill from top. There is a good video on YouTube by Candy on the Ivogo and Ruby Roo on the authentic Kayfun mini. For the price the clone is a winner. ISU lost by a field goal at end of the game.

I know the feeling. Chargers did the same today - against the Chiefs - at home

 

[retic1959]

Retic, Did you ever post the details on the build you nailed down on the Rose?

I used Gplat 24ga 10 wraps at 2.4mm id , came out to .41 ohms .