Let's Talk Hardware

[PapawBrett]

I think I may have just made the right choice !

This little wide bore drip tip is the perfect marriage for my new LP/SL Grand and RM5 Combo. Yea, it looks great, but the wide bore drip tip makes the dual coil vape so much smoother and cooler. It's like the RM2 on steroids ! Just what was needed for this little mod !

If anyone is thinking of trying, or currently using, a dual coil and would like a cooler vape- the wide bore drip tip is the way to go !

 

[retic1959]

Ha! That's exactly the one that caught my eye (the black one). I see they have it on Fasttech for much cheaper. Check it out. $25.84 Kayfun Lite Plus V2 Style Rebuildable Atomizer (4.5ml) - 1:1 clone / stainless steel / PVD coating at FastTech - Worldwide Free Shipping I think I'm gonna end up buying another KFM, a KFL Plus V2, and a Taifun.

You should be fine with that particular KFL+ , it's SXK , though Bronze was absolutely right about the Hcigar KFL+ from Vape Royalty if you want something that's on the money and higher quality you can't go wrong with it , I recommend it as well . You should check in to the Erlkonnigin or Orchid clones on FT before you pull the trigger on that Taifun .

 

[Bunnykiller]

get an RSST and end your worries about the next best thing

 

[Dusty_D]

Posted this in the Natural Tobacco thread when asked about the ErlPrinz yesterday..Sharing:


ErlP: Way better air-flow (lung-hit friendly), deck does not move when tightening screws, wick channels hold drillbit in place, excellent juice capacity (7+ ml) and top-fill. Even with all that going for it, I'm still not comfortable with taking it out and about because of the plastic tank. Scared that it may drop and/or crack and I'll be stuck. If they came out with a windowed tank like the KFL.. then Yes!! it is better than the KFL. They do have a full SS tank but I like to see my juice level.

Until then.. the KFL is still the best topper I've owned.

They both perform flawlessly!


If plastic tanks are not a problem for you, then I would recommend the ErlK over the KFL.. at this time.

 

[Voltron]

You should be fine with that particular KFL+ , it's SXK , though Bronze was absolutely right about the Hcigar KFL+ from Vape Royalty if you want something that's on the money and higher quality you can't go wrong with it , I recommend it as well . You should check in to the Erlkonnigin or Orchid clones on FT before you pull the trigger on that Taifun .

I take it you're not a huge fan of the Taifun. I'll check out the two others you mention first. Remember, I want something below 3ml.

What do you think of the KFL+? How much juice does it hold with the nano chamber on?

BTW, thanks again for suggesting the KFM. It's the best vaping product I've bought so far. And that includes the Magnum or whatever it is you call it.

 

[retic1959]

I take it you're not a huge fan of the Taifun. I'll check out the two others you mention first. Remember, I want something below 3ml. What do you think of the KFL+? How much juice does it hold with the nano chamber on? BTW, thanks again for suggesting the KFM. It's the best vaping product I've bought so far. And that includes the Magnum or whatever it is you call it.

I don't use nano kits at all , so I have never checked in to their capacity , you're still thinking in terms of a clearomiser that taints your juice but you don't have to worry about that with any of the kayfuns . You can vape them dry and you won't get that funky clearomiser taste from them . I think the KFL+ is the way to go for you , the build is the same as the KFM but easier because you have more space , the vape quality is the same as a KFM , it's the same design . The Taifun is basically like a large Protank , if you don't get the wick just right it'll turn into a giant straw and you'll be drinking your juice from it , you're also more likely to get backflow of nasty juice into the tank on it . You haven't used the Magma to it's potential , but you'll get there if you keep going with the building .

 

[76bridget]

Kayfun in Nano mode will hold about 2ml, maybe a little less but not more.

 

[Voltron]

I don't use nano kits at all , so I have never checked in to their capacity , you're still thinking in terms of a clearomiser that taints your juice but you don't have to worry about that with any of the kayfuns . You can vape them dry and you won't get that funky clearomiser taste from them . I think the KFL+ is the way to go for you , the build is the same as the KFM but easier because you have more space , the vape quality is the same as a KFM , it's the same design . The Taifun is basically like a large Protank , if you don't get the wick just right it'll turn into a giant straw and you'll be drinking your juice from it , you're also more likely to get backflow of nasty juice into the tank on it . You haven't used the Magma to it's potential , but you'll get there if you keep going with the building .

Okay, broseph. So the KFL+ it is! I saw this cheap one has gotten good reviews:

$18.82 Kayfun Lite Plus V2 Styled Rebuildable Tank Atomizer (4.5ml) - stainless steel / w/ nano chamber & chimney at FastTech - Worldwide Free Shipping

Should I go with the 1:1 clone I linked Bronze to instead?

 

[retic1959]

Okay, broseph. So the KFL+ it is! I saw this cheap one has gotten good reviews: $18.82 Kayfun Lite Plus V2 Styled Rebuildable Tank Atomizer (4.5ml) - stainless steel / w/ nano chamber & chimney at FastTech - Worldwide Free Shipping Should I go with the 1:1 clone I linked Bronze to instead?

I would go with the 1:1 , it's made by SXK/Infinite , I've had excellent results with Infinite clones , it's usually best to go with the 1:1 versions on FT especially if you want aftermarket parts later .

 

[Bronze]

Waiting for the new Kayfun.

 

[MostlySunny]

My Achilles finally departed customs. I should have it by Wednesday. Yay!

 

[retic1959]

My Achilles finally departed customs. I should have it by Wednesday. Yay!

Dam ! Was it in Chicago ISC ?

 

[Bronze]

Retic, don't know if you looked at that Achilles. Looks like it has the same direct-to-coil airflow as the Magma, Veritas, Viking, and Plume Veil.

 

[MostlySunny]

It was in NY ISC.

It is direct air to coil and 2 separate wells. I'm going to use 2 flavors at the same time and be really crazy. And it's pretty. And light (22g) and I can't wait to see it and hold it and goof around with it.

 

[Bronze]

Wow, Adam added a Plume Veil clone to his RDA inventory. He must have lots of cloud chasers coming into his store. He also has a Stingray clone.

 

[Bronze]

It was in NY ISC.

It is direct air to coil and 2 separate wells. I'm going to use 2 flavors at the same time and be really crazy. And it's pretty. And light (22g) and I can't wait to see it and hold it and goof around with it.

I saw a 26650 RDA the other day that was made by the same people who make the Veritas. Looked like a dual Veritas...each with their own juice well to do exactly that...mixing flavors.

 

[Chakris]

Ha! That's exactly the one that caught my eye (the black one). I see they have it on Fasttech for much cheaper. Check it out.

$25.84 Kayfun Lite Plus V2 Style Rebuildable Atomizer (4.5ml) - 1:1 clone / stainless steel / PVD coating at FastTech - Worldwide Free Shipping

I think I'm gonna end up buying another KFM, a KFL Plus V2, and a Taifun.

I believe that's the same model I got from FT, although I got the Stainless Steel one. I have no problems with mine, save the air intake is slightly smaller than the genuine KayFuns and it whistles a tiny bit. It comes with a nano tank as well. Don't think you'd be sorry if you get this one, Voltron. I give it a thumbs up!

$26.58 Kayfun Lite Plus V2 Style Rebuildable Atomizer (4.5ml) - 1:1 clone / stainless steel at FastTech - Worldwide Free Shipping

 

[Chakris]

I take it you're not a huge fan of the Taifun. I'll check out the two others you mention first. Remember, I want something below 3ml.

What do you think of the KFL+? How much juice does it hold with the nano chamber on?

BTW, thanks again for suggesting the KFM. It's the best vaping product I've bought so far. And that includes the Magnum or whatever it is you call it.

I have the Nano on now, but I didn't think to measure how much exactly how much it holds. Giving an educated guess, I'd say about a ml less than the full size KFL, so bout 3.5 max. However, when you fill you won't be filling all the way up. It has to have space to create the vacuum that feeds juice into the chamber. So that would be around 2.5 - 3 ml. Just what you were looking for, is it not?

 

[Voltron]

I have the Nano on now, but I didn't think to measure how much exactly how much it holds. Giving an educated guess, I'd say about a ml less than the full size KFL, so bout 3.5 max. However, when you fill you won't be filling all the way up. It has to have space to create the vacuum that feeds juice into the chamber. So that would be around 2.5 - 3 ml. Just what you were looking for, is it not?

Yes, that's exactly what I'm looking for. I'm ordering one later today for sure.

I wanna compare it to my KFM before I buy multiple ones of the one I end up liking the most. So far the KFM is working great. I like how its draw is loose but not really airy. I can get really flavorful hits off it with minimal effort.

 

[Chakris]

That's cool, Voltron. I forget, did you mention that you had a device to put the KFL on? It would be kind of top heavy on an eGo style battery since it's 22mm wide.