Liquid on the heating element?

[BigCity901]

Every time I vape either with my standard EVOD or MVP V2 I have noticed when I remove the tanks there is always condensation/juice on the heating element/contact. Was curious if this is going to ruin my units. I try to clean and absorb it with a q-tip very gently then a light blast with compressed air. This happens with all my tanks... EVOD, iClear 30...

 

[k702]

do you mean on the 510 connection (the threaded piece on the bottom of the atomizer you screw into the top of your mod?)

 

[BigCity901]

the connection on the mod itself...

 

[drummerskey]

If it is condensation and not juice, it is likely the result of leaving some vapor in the center tube.......basically, not clearing it all the way after a drag/hit/toot/pull.

It will not hurt anything but it is a good practice to take the tank off every few hours just to check, wipe off and replace.

 

[JaRod]

In my experience condensation occurs at the driptip, what you are getting seems to be leaking, which is normal with the evods, and anything that uses the kanger coils. just clean the connection in your mod every time you refill your tank, it shouldn't be a major concern.

 

[joaquingt]

yeah bottom coils attys tend to leak, the best you can do is to buy a 510 to ego adapter and protect youre battery or just keep the battery clean