Looking for a new Vaping unit need suggestions Please !

[Jay-mo]

Hello all, I am using the Vision spinner 1.0-4.5volt with Kanger t3 2.5ohm tanks and coils. I have been using this for a year and want to try something else but there are so many units out there and I am not one to go trying things in a shop so I am hoping you veteran members can help me out with some suggestions.I really want a wickless if there are any that are recommended. Thanks so much I really appreciate it.

 

[Cloud boy]

Are you looking to get into anything specific? like vv/vw mods or mech mods. RDAs or RBA tanks etc.

 

[xyanide]

There's not really such a thing as wickless. If I can suggest anything grab either a vamo or Zmax v5 for your VV/VW needs and an aspire nautilus tank.
If you're looking to get into rebuilding you can look at kayfun/russian clones because they're relatively easy to build/maintain and vape really well.

By the by, I used to love the kanger T3. I think what's most important is we need to know your budget!

 

[Jay-mo]

Budget is open , I just want a better hit with less wick if possible...Thanks for the suggestions

 

[Cloud boy]

Anything will have wicking, do you prefer dripping or tanks?

 

[Jay-mo]

Anything will have wicking, do you prefer dripping or tanks?

I have not used a dripper , only tanks. I am open to anything though

 

[Cloud boy]

If you are looking to get huge clouds of vapor and flavor then a RDA (rebuildable dripping atomizer) will be what you want. And it is usually paired with a mechanical mod, most people prefer it that way anyway. But be careful with mech mods. They are quite simple and user friendly but you will need to know exactly what you're doing and what batteries and ohms to have.

 

[super_X_drifter]

If your looking to buy what will most likely be the last type of device you purchase, you should check out a REO grand.

I was in your same position a little over a year ago and got one. Since them they are all I've even considered using.

You just put in a rechargeable battery, fill the onboard 6 ml juice bottle, top it with a bottom fed RBA which are simple as heck to rebuild ( and very very small wick of preferably rolled cotton ) squeeze the bottle every few hits and fresh squozen juice is delivered to the RBA and vaporized with a touch of the fire button into copious clouds of tasty vapor.

Their nearly destructible and highly portable / pocket friendly. It's your no backups required vape everywhere device.

Here's a vid on the grand:
http://youtu.be/WaDqS2kPLo0


Here's a vid on how to rebuild a typical bottom fed RBA:
http://youtu.be/lUodSPmI0js

Here's a link to the REOsmods forum here on ECF (the most friendly, helpful and vibrant forum you'll likely EVER find http://www.e-cigarette-forum.com/forum/reos-mods/

 

[floridaBMW]

Maybe when ur saying "wick less" u mean u don't want to tinker or rebuild? Any mass produced pre wrapped atomizer such as ur Kanger will be limited in its vape. Although good in its own right but limited. I'd suggest u buy an IGO dripper. It's cheap and great to start rebuilding on. U must also consider if u go that route u'll need a diff device for that atty. I imagine it will work but the diameter in the IGO is 20 millimeter or bit smaller. Ur spinner might be a bit top heavy. But once u start rebuilding u'll see why so many do so. Flavor is much better and then if u so choose u can get much better clouds. So in summary u'll need IGO, 2 or 3 mil silica or ekowool and wire . I'd suggest 34 or 30 gauge. New device (mech/regulated) if u get a regulated it ususly can measure ur coils which is very important, batteries and charger. Make sure u take the time and educate urself. There are a bazillion videos on YouTube and gazillion posts on ECF. And more importantly have fun, it's incredibly fun for me and stopping smoking has been a blast.

Ken


Sent from my iPhone using Tapatalk

 

[StevenServo]

vamo is a ok start but if u have a little extra money i'd go with a tesla

 

[Jay-mo]

After doing quite a bit of research I have decided on a Mech mod that I do not have to mess with. I just want a unit I do not have to rebuild and tinker with to get what I am looking for. Now the question of which one is the most user friendly and has the best hit/vapor production is in order.I would really appreciate some suggestions on which Mech mod I should be looking at.I do not want to spend $300 but am willing to shell out some cash for the right mod....Cheers ECF and thank you

 

[ACIDXFX]

The mechanical mod won't afford you a noticeable performance boost over a standard VV/VW mod. You would be better to get something like a ZMax or Vamo (Or a DNA30 Mod, Provari, Etc.) rather than a mechanical. Mechanical is really more suited to RBAs than standard tanks. I get better performance out of my ITaste/Kanger than I do out of my Mech/Kanger (tried it once to see what it was like).

If you want to go that route though. You can get Mods from the mid $20's and up into space. Take a look at a Nemesis. Or maybe a Private V2. The mod won't make a difference, it's all looks. You will need good batteries (Panasonic, EFest) and a good charger (Nitecore makes a good one, although there are a few alternatives).

 

[Jay-mo]

Thanks ACIDXFX, very much appreciated.