Looking for an all SS ego sized RDA

[Ctor]

I finally recoiled my IGO-L and Wyvern (Rainbow V3) drippers and am enjoying them almost as much as my gennies. I want a couple of drippers around for testing my DIY concoctions.

What I'm looking for is something that is the same form factor as the Wyvern, but in all SS. I looked at the IGO-S, but the well is super shallow, and I was hoping for a deeper well like the Wyvern.

The other thing I found was the A7's, but I don't like the air flow running thru the 510 connector.

Is there anything out there that's all SS that fits the bill? I don't mind a more expensive alternative, but I'm not fond of waiting lists and chasing down items to catch them for the 5 minutes they're in stock.

Any help would be appreciated.

 

[Kemosabe]

the A7. if you dont want the bottom air hole, just plug it and drill a hole in the cap.

maybe there is a SS phoenix out there. the diameter would be damn near perfect. i really dont know if a SS phoenix exists though.

and the eternity is also ego-sized, but i dont know if its SS. kinda doubt it but the price would suggest otherwise.

then theres the dream dripper. its ss, but a bit fatter than a standard ego. would look good on the ego fat batt imo.

oh, what about the ERA or hornet? i think theyre SS and one of them is smaller than the other, making it pretty ego-sized IMO.

 

[Jeremy Evans]

the bullet looks the right size not sure about SS though
https://www.thehouseofvapor.com/ProductDetails.asp?ProductCode=511

 

[Ctor]

the A7. if you dont want the bottom air hole, just plug it and drill a hole in the cap.

maybe there is a SS phoenix out there. the diameter would be damn near perfect. i really dont know if a SS phoenix exists though.

and the eternity is also ego-sized, but i dont know if its SS. kinda doubt it but the price would suggest otherwise.

then theres the dream dripper. its ss, but a bit fatter than a standard ego. would look good on the ego fat batt imo.

oh, what about the ERA or hornet? i think theyre SS and one of them is smaller than the other, making it pretty ego-sized IMO.

Yeah, modding the a7 is a possibility I've thought about, but I'd rather try to find one that fits what I'm looking for before I start thinking about micro drill bits and stainless steel .

The era looks like a leak waiting to happen. It has no well per se, and it looks like juice can seep down the sides to the O-rings so if you do open it before it's dry you won't be for long.

The thing I like about the Wyvern/Rainbow is that you can leave the piece that functions as the well on the unit and still have access to the wick and coil, or take it off and have a much easier job of attaching the coils vs some other designs.

 

[Euphonious Nonsense]

Whats wrong the igo-l, is it too big??? I know the posts are brass but the rest is SS.

As far as the ERA, you are right as my octpopus RDA has the same issues with leaking, plus the era is really small. Have you checked out vicious ant's cyclone or hornet? Sherrie vapors has them in stock right now, check out her FB page.

 

[Ctor]

Whats wrong the igo-l, is it too big??? I know the posts are brass but the rest is SS.

As far as the ERA, you are right as my octpopus RDA has the same issues with leaking, plus the era is really small. Have you checked out vicious ant's cyclone or hornet? Sherrie vapors has them in stock right now, check out her FB page.

I have an igo-l, and it's great. I'm looking for something that will look good on a twist.

 

[minimalsaint]

The Phoenix is the same diameter as the eGo- all stainless as well.

 

[Ctor]

The Phoenix is the same diameter as the eGo- all stainless as well.

The Phoenix description says stainless and plated copper. Which parts aren't stainless?

 

[Statistic]

I know it's a totally different form factor but I'm waiting on a couple Vision Eternity's to come in. I'm hoping a rinse and vaping some flavorless juice will be sufficient to switch (most) flavors. And if not I'm gonna try just getting several of the carto tank things it's able to use.

 

[aPandaz]

Check out the IGO-S.

 

[Ctor]

I know it's a totally different form factor but I'm waiting on a couple Vision Eternity's to come in. I'm hoping a rinse and vaping some flavorless juice will be sufficient to switch (most) flavors. And if not I'm gonna try just getting several of the carto tank things it's able to use.

I tried the eternity, both the ones i bought leaked like crazy. One had a very loose positive terminal out of the box, and the other the positive post loosened and leaked after a few coil changes. I hope you have better luck with yours.

 

[Statistic]

I tried the eternity, both the ones i bought leaked like crazy. One had a very loose positive terminal out of the box, and the other the positive post loosened and leaked after a few coil changes. I hope you have better luck with yours.

Damn, that's the main reason I got them, I heard they don't leak as long as you don't over fill them. Thought this would be great for my girlfriend.

Thanks for the heads up, I'll be sure to keep an eye on the pos posts.

 

[gbojar]

New SS Optimus:
Optimus RDA Stainless Steel - RBA's by VaporTek USA

 

[Jerms]

New SS Optimus:
Optimus RDA Stainless Steel - RBA's by VaporTek USA

I've been really curious about this one since I saw it pop up at MadVapes a little bit ago. Almost pulled the trigger on it but decided to wait on reviews. Looks really nice, just not sure how well the spaced out small holes will work.

Sent from my LGL55C using Tapatalk 2

 

[UncleChuck]

The "Phoenix V4" at Hoosier Vapes is available in SS, and it's entirely stainless save the o-rings and the posts. The drip tip, cap, and base are all stainless.

The "Squid" from Madvapes is also available in SS, but the base isn't stainless, it's plated brass just like the aluminum squids.

They are both ERA clones, and they don't have that little juice lip like the Igo-L does. If you remove the cap with too much liquid some will fall out. They look great on an eGo though, I threw one on a stainless 900mAh ego with a silver flat top thread cover and it looked great.

 

[Jerms]

The "Phoenix V4" at Hoosier Vapes is available in SS, and it's entirely stainless save the o-rings and the posts. The drip tip, cap, and base are all stainless.

The "Squid" from Madvapes is also available in SS, but the base isn't stainless, it's plated brass just like the aluminum squids.

They are both ERA clones, and they don't have that little juice lip like the Igo-L does. If you remove the cap with too much liquid some will fall out. They look great on an eGo though, I threw one on a stainless 900mAh ego with a silver flat top thread cover and it looked great.

Both of them are offered at Sun-Vapes for the crazy low price of $4.79 each. Called the Cutie and the Cheapie. Awesome little drippers.

Sent from my LGL55C using Tapatalk 2

 

[Statistic]

Been loving my VE's. They are a fantastic backup atty. Haven't leaked a drop yet.