Looking for best Battery Mod!!!!

[vaporich]

I have seen a few different mods sold for the battery.
THe Janty Stick
The Silver Bullet
The Prodigy

Maybe there is more I am unaware of?

Will the people that have these, and have used please help me decide which one I should try?
If the mod users out there, could direct me on which one to get, that would be great. I want the best strength, out there, for the best price.

Ive watched plenty of reviews, I want to see what the consensus is.
If you dont like typing, just put 1 for Janty stick, 2 for SIlver Bullet, and 3 for Prodigy. By, the way, I can't seem to locate where to find the prodigy anywhere, searching for clips, but not turning up.

Thanks in advance.

 

[Zofryer]

Gah, it really depends what you are looking for. Do you just want more battery life? Do you already have an atomizer type you like? Do you want high volts? Which is more important?

Draw,
Throat Hit,
Battery Life,
Cart Capacity,
Dripping,
Vapor Production,
etc.

Need More Information

 

[vaporich]

I typically use, the 510 or 901, now that I have a mainline 901 passthrough, Ive been using that alot, since it gets 5 volts.
I just need a real strong throat hit, with really good vape.
I smoked 3 packs a day, down to like 8 or 9 analogs a day.
I think if I had a ton of vape and throat hit, just like my analog menthols, I could be analog free.
Im not concerned about dripping or using too much juice, I always have juice.
I would like to not have a cut off either, though. THats the one downfall to the passthrough for 901.
Please help, I want to cough when I hit it hard.
RIght now, I puff away, and never cough.

 

[Gotcoffee]

Im also looking into getting a new e-cig and just noticed the super T also. So many to choice from. I guess its better then not enough.

 

[Zofryer]

I typically use, the 510 or 901, now that I have a mainline 901 passthrough, Ive been using that alot, since it gets 5 volts.
I just need a real strong throat hit, with really good vape.
I smoked 3 packs a day, down to like 8 or 9 analogs a day.
I think if I had a ton of vape and throat hit, just like my analog menthols, I could be analog free.
Im not concerned about dripping or using too much juice, I always have juice.
I would like to not have a cut off either, though. THats the one downfall to the passthrough for 901.
Please help, I want to cough when I hit it hard.
RIght now, I puff away, and never cough.

The closest thing to your 901 passthrough with no cutoff would be a Prodigy. Also, their PT's are really nice too. I have two for backups.

http://www.puresmoker.com/product_p/prod901.htm

Hope this helps

 

[Zofryer]

Im also looking into getting a new e-cig and just noticed the super T also. So many to choice from. I guess its better then not enough.

I have a super-t ordered, but haven't received it yet. I'm really excited to try it as an 801 aficianado.

 

[Stormynights]

I am a fan of 6 volts. It keeps me off cigarettes.

 

[breakfastchef]

I built several DIY modded devices and found that a minimum of 5 volts will provide very good throat hit and vapor production. Any commercially available device that can run 5+ volts will perform similarly so forum factor is what you need to decide on. It would be worth looking at the Super T1, Prodigy, Silver Bullet or the AdapteveR. Watch video reviews on each of them.

I, like Zofryer, have a Super T1 for the 801 atomizer on order. I looked for several months before jumping on the Super T1. I liked the form factor, saftey and design features and that it can run at two voltages (3.7v & 6v).

 

[Island Refugee]

I have a super-t ordered, but haven't received it yet. I'm really excited to try it as an 801 aficianado.

Pardon my newb ignorance, but what is a Super-T?

 

[Zofryer]

Yeah, I should clarify. If you just want it to hurt you and hurt you bad, there's Billyboy's mods. He sells them. I'll go hunt the link and edit this post:

http://www.e-cigarette-forum.com/forum/e-cigarette-suppliers-forum/30133-6v-twin-801-mods.html

 

[Zofryer]

Pardon my newb ignorance, but what is a Super-T?

Super T Manufacturing

 

[vaporich]

SO what do u think. The prodigy, whats the super T.
and what is billybobs mod.
Im trying to spend under a 100. IF possible.
Zofryer, could u please list me the links to look at those models.
That would b a great help.
Want to buy something tonite.

 

[framitz]

I typically use, the 510 or 901, now that I have a mainline 901 passthrough, Ive been using that alot, since it gets 5 volts.
I just need a real strong throat hit, with really good vape.
I smoked 3 packs a day, down to like 8 or 9 analogs a day.
I think if I had a ton of vape and throat hit, just like my analog menthols, I could be analog free.
Im not concerned about dripping or using too much juice, I always have juice.
I would like to not have a cut off either, though. THats the one downfall to the passthrough for 901.
Please help, I want to cough when I hit it hard.
RIght now, I puff away, and never cough.

I've measured the voltage to the atty on a 901 pass through, it isn't 5 volts, it is 3.90 volts with no load (just measured again to be certain). Yours may be different (mine is a BE901), but it's doubtful if it has cut off. Find or build one without the limiting electronics and you'll have a different and better experience altogether. My home built mod with the 901 atty at 5 volts is intense.

 

[happily]

Why on earth would you want(not someone else's opinion) everyone else
's opinion...............you know what u want. You've been here before

 

[vaporich]

on ur 901 passthrough, does it have a slb and bf, marked on the threads where the atomizer connects to? That would tell us if they are the same. It is a newly constructed model type, the first ones released, malfunctioned too much. No button on it, obviosly its auto. do you know how to mod them, I wish I could test the voltage myself, I dont have a tester. I was told it was 5volt, since its direct to the 5volt usb.
Rich

 

[vaporich]

Happily, are u referring to me, been where before?

 

[breakfastchef]

Im trying to spend under a 100. IF possible.
Want to buy something tonite.

Going price for a good quality device will be +$100. Most of the devices mentioned in this thread are made to order, so there may not be any in stock (except the Janty Sick, perhaps.)

 

[framitz]

on ur 901 passthrough, does it have a slb and bf, marked on the threads where the atomizer connects to? That would tell us if they are the same. It is a newly constructed model type, the first ones released, malfunctioned too much. No button on it, obviosly its auto. do you know how to mod them, I wish I could test the voltage myself, I dont have a tester. I was told it was 5volt, since its direct to the 5volt usb.
Rich

My 901 stuff has no markings it is direct from the Best -Ecig factory hence the model # BE901. The only way to determine voltage to the atty is to measure it with the pass through plugged in and activated (I gently blow at it to turn it on while measuring across the contacts).

All USB pass throughs get 5 volts from the USB port, but it's highly unlikely that is the voltage powering the atomizer if it has auto switch and cut off circuitry.

You should be able to find an inexpensive multi-meter for under $10. They're also useful for checking atomizer resistance.

 

[Zofryer]

SO what do u think. The prodigy, whats the super T.
and what is billybobs mod.
Im trying to spend under a 100. IF possible.
Zofryer, could u please list me the links to look at those models.
That would b a great help.
Want to buy something tonite.

The links are in the posts. The least expensive route to a high volt mod I know of without actually building it is the Atmosusa "Copper" for sale here:

AtmosUSA

You'd want to order it with the optional batteries and charger, and get some spare atomizers. You'd come in under 100 shipped. Here's a little demo video:

YouTube - Copper E-Cig mod.

If you want to hold off, I have one coming in a few days. I'll do a review.

 

[vvera]

Any one know the dimensions of the "SuperT" without the 6 volt extension?