Looking for "easy to fill" rta.
- Thread starter JonasDK
- Start date
- th_trl_thread_readers 0
- Status
Tough call on the combination your looking for. When I saw the headline I thought this one would be easy! I was gonna say lemo with the silicone fill hole plug. If you have iron lungs and can suck a golf ball through a garden hose you might be able to lung hit it enjoyably.
The taifun is really easy to fill. I can lung hit it wide open, without any bushing in the air hole. It's a single coil though.
I'm a kayfun fan and love the lemo but right now the sub tank gets my vote! Got the mini (22mm version). You can get to the coil with a full tank if need be, fills like a taifun gt.
Airflow is one or two large holes or a open slot if you prefer!
Not sure you could get a duel in there, I'm good on single coil.
Never had even a hint of a leak standing or on its side and holds a decent amount of liquid.
Airflow is one or two large holes or a open slot if you prefer!
Not sure you could get a duel in there, I'm good on single coil.
Never had even a hint of a leak standing or on its side and holds a decent amount of liquid.
I'm a kayfun fan and love the lemo but right now the sub tank gets my vote! Got the mini (22mm version). You can get to the coil with a full tank if need be, fills like a taifun gt.
Airflow is one or two large holes or a open slot if you prefer!
Not sure you could get a duel in there, I'm good on single coil.
Never had even a hint of a leak standing or on its side and holds a decent amount of liquid.
dual nano coils work, but anything bigger will short. tbh, 0.5-0.8 ohm single coils work great too
http://www.e-cigarette-forum.com/fo...-systems/613194-looking-protank-like-rta.html
taifun, subtank, flashevapor, heron, and a few others.
Duals and toolless, I would say an Orchid with a Kayfun top fill cap.
Also the Aqua v1 and v2.
The Rose v2 as well can be built dual rather easily.
Also the Aqua v1 and v2.
The Rose v2 as well can be built dual rather easily.
Subtank you just unscrew the bottom and fill up.
Only the chimney in the centre you need to avoid , plenty of room.
Only the chimney in the centre you need to avoid , plenty of room.
Thanks guys.
I think I'm gonna go with the subtank mini, since I don't want to spend too much money on it.
Does anyone know how the airflow on it is compared to the goblin?
And how does the rba head work with high vg juice?
I think I'm gonna go with the subtank mini, since I don't want to spend too much money on it.
Does anyone know how the airflow on it is compared to the goblin?
And how does the rba head work with high vg juice?
Last edited:
Aqua v2 I'd say is up there, dual coil, easy building and you fill it up by unscrewing the tank from the build deck and filling through one of the 4 small holes, which is nice because then you can work on your build without emptying out your tank. Only problem and it does make filling kinda tedious is if your using the glass dripper bottles everything else fills it up easily.
I've been vaping the Goblin for only two days only now. I use 90VG juice. The Goblin keeps up with the wicking without delivering dry hits. Not a one thus far, with 3 tank fills.
Regarding filling, you need to take the screw out from the bottom to fill the tank. I was reluctant to order the tank because of that but I'm glad I decided to give it a shot. This is by far the best RTA that I have ever used. I can't say enough good things about it. I would encourage you to try it.
See my very brief gush about it here ...
http://www.e-cigarette-forum.com/forum/rta/637657-youde-goblin-18.html#post15402454
Regarding filling, you need to take the screw out from the bottom to fill the tank. I was reluctant to order the tank because of that but I'm glad I decided to give it a shot. This is by far the best RTA that I have ever used. I can't say enough good things about it. I would encourage you to try it.
See my very brief gush about it here ...
http://www.e-cigarette-forum.com/forum/rta/637657-youde-goblin-18.html#post15402454
its really open draw, 6 to 7 second full lung hits, and the high VG depends on how you do your wick
Where to get the silicone fill plugs for the Lemo? I still haven't found them.
thats funny, i've heard a couple people say that, and others saying its really airy, mine is as open as my subtank mini on full with the OCC easy
I have them both. I find the goblin to be a fair bit more open/airy draw. I'm using the mini rba with 90vg juice atm and its been fine, using just a little bit of Japanese cotton for wick.
Sent from my Nexus 6 using Tapatalk
Should be in the box, lift up the foam bit if you haven't checked. The plugs looks like a big white oring with a sicky outy plug bit on
I've had suicide bunny's mothers milk and OB in the subtank , both pretty thick and wick well.
I have the Taifun and it definitely is interchanged through my weekly hardware. Great RTA and easy to fill compared to a lot of others.
- Status
