Looking for High volt bottom feeding tips &tricks

[TechnoDestructo]

I just ordered a Old Goat 6 volt bottom feeder. While waiting for it to come in the mail I am hoping to get some feedback from other people that use higher voltage bottom feeders. ( or bottom feeders in general .... Or high voltage in general i suppose) This will be my first step away from the easy to use v4l ecig and I love to hear "do's and not to do's along with opinions on attys and accessories and needs for it. I have a bunch of different ohm attys coming so I will be able to experiment a bit.
So please feel free to post your methods & experiences.

 

[WomanOfHeart]

Make sure the atties are for HV vaping. I would say they need to be at least 3.5Ohms. These atties can handle high voltage vaping, but you need to make sure they stay wet. Dry atties = dead atties. They also go through juice faster because of the heat they produce, so just be aware of that.

I prefer 801 and 901 HV atties. I just get better flavor and a smoother vape from them.

 

[Levitas]

If you've found your comfort zone, then try and replicate it!

For example, if you were using a 3.7v device before, with a 1.5ohm load (atty/carto) that would be around 9 watts or so. So, with your 6v device, you'll want a 3.5ohm-ish load to replicate a similar power rating, or wattage. Though the vapor will be warmer

Use Ohms law to figure out your wattage, an easy way to apply ohm's law when used for vaping purposes is

Voltage x Voltage divided by Resistance (Ohms in atty/cart) = Power or Wattage
3.7 x 3.7 / 1.5 = approx. 9watts
6 x 6 / 3.5 = approx. 10watts

so on and so forth

 

[JTman]

A nice tip that had helped me with the bottom feeder was after squeezing the bottle to feed it take a quick puff without firing the atty to kind of "distribute" the juice within the atty. Once I started doing this I got much more consistant performance.

 

[Princessdee]

Stock up on juice. 6V is a juice hog.
I like it a lot.

Hubby has just made me a vv so I'll see how that goes, but I mostly set it at 5.7 - 6 so far.