• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

Looking for info on fastech.com

Status
Not open for further replies.

Bill's Magic Vapor

Vaping Master
ECF Veteran
Verified Member
Feb 8, 2013
4,493
11,078
USA
This whole fasttech thing has been discussed ad nauseum. Suggest reading this 3,000+ post thread:

The FastTech Thread For All FastTech Posts

All I can say is that I have twelve orders, received all twelve, and, so far, loved everything I've bought, and have twice as much gear because of it. Whether genuine or clone, the products I received have worked flawlessly, have been as described, and have been 1/3 to 1/2 the cost of other alternatives. Why people care where others buy their gear is beyond me. To each their own. But, mention Fasttech and the crazies on both sides come out. I strongly suggest reading about specific Fasttech products you are interested in the threads to see if they worked out ok. Most do, some don't. I can tell you that the Innokin, Kamry, Kanger, Nitecore, and Vamo products have met or exceeded my expectations. Some of the clones, including the mech mods, have been as good, and sometimes better than the originals. Some of the products, like the evods, have been great, but I needed to replace the coils. Many of the tanks are just generic to start with and have worked just fine. My orders have taken from 8 to 15 days from ordering to delivery, with an average of 11 days. They don't have many more things that I want from the site, but they are adding new things all the time. Some of the clones are 1/10 or better, the cost of the originals. Excellent way to find out what you like, without selling a kidney, to check out. In many ways, this is a very pragmatic approach to vaping. I was checking out a $60 nimbus at the vape shop yesterday, and I may get it. I can check out a clone on Fasttech for $5.50. I can always buy the real thing later if I like it, and I may do that. There are RBA's (clones), that sell for the price of a drip tip in the States. For the noob, it's hard to ignore these opportunities. I have purchased 11 APV's and mods from the site. I also purchase from US Vendors. Me likee! Really happy with my experience at Fasttech.

I will give my two cents about some of the arguments against Fasttech. My top ten list (I'm sure there are many more):

1. Buy American, China sucks: 90% of all vape gear is made in China, it's a question of price, and paying the middle man and distribution cost (multiply by four for the same product made in the US).

2. By selling below the MSRP, the genuine products are said to be "fake", when in fact they are the genuine article, but not selling at the suggested price fixing offer from the manufacturer.

3. Buy American: I do, much of my gear is not sold on Fasttech, including Sigelei, Provari, etc.

4. Shipping takes too long: Coming from Hong Kong does take a while. A legitimate tradeoff, with free shipping. Also, many items don't ship immediately, but those delays are clearly posted. This is a standard inventory control procedure and Fasttech let's you know in advance.

5. Warranty: Fasttech may have the best warranty of any company in the World. Certainly competitive. Many stories in the threads.

6. Customer Service: Fasttech may have at least as good as any company in the world. Certainly competitive. Many stories in the threads.

7. We should support our local and national vendors: I do, most of my gear is not sold by Fasttech. Their most expensive item is $75. All high end gear has to be purchased elsewhere. I buy or make all my own juice, though I've heard good things about Liqua and Hangsen. Dekang, a mixed reaction.

8. Their stuff is all knockoffs: Much of it is. In many cases, the knockoffs works equal to or better than the original. Caveat Emptor. Do your homework. Buying a brand name is a buying choice, not a requirement.

9. You're un-American: You're out of your mind. Open your eyes. You don't know me. Know thyself first.

10. Fasttech doesn't play by the rules: Sometimes the rules are unfair. I'm not only responsible for putting food on my family's table, but I'm not an idiot, and cannot afford to ignore bargains. I do buy products from Walmart (90% of which are made outside the US). Why do you even care?

Sorry for the rant OP, I'm just sick of hearing about the Fasttech bashers, and am posting my frustration here. Hopefully, some of it is useful to you. I'm sure that there are many Fasttech horror stories. You can get those from any company and I have my share of stories from US Vendors, and, surprisingly, none from Fasttech so far.

Legitimate Questions:

1. Why buy retail, when you can buy wholesale, with no minimum and no shipping cost?

2. Why pay the middleman a premium, plus shipping?

3. Why is my buying a product from Fasttech of concern to others?

4. If Fasttech delivers (eventually) what they advertise at discounted pricing, why is this not a viable consideration and option?

5. Why am I ranting so much? Probably because this is my last Fasttech post (maybe), and I wanted to cleanse and purge, and I haven't had a bad experience. So far, so good.

Anyway, my two cents in a wall of words. Do your homework, you'll be fine. There is no right or wrong decision, just a personal one. Good luck, Power up and Vape On!
 

toughguitar

Senior Member
ECF Veteran
Jun 11, 2013
243
105
Central FL
After ordering all my gear from US sites, and looking to buy a backup vamo at a reasonable price,I couldn't ignore fasttech's prices. After taxes and shipping from a US site for just the device, I could get a kit with a good charger and batteries from fasttech. Since there probably all clones from China anyway, why not buy directly from the source?
 

selmaaxku

Moved On
Aug 13, 2013
0
0
37
usa
  • Deleted by retired1
  • Reason: Unregistered Supplier

UntamedRose

PV Master
ECF Veteran
Verified Member
Mar 23, 2010
7,427
39,123
Homeish now
Snips an excellent rant! :D :vapor:

Personally.....and this isnt an official ECF POV but a personal one.

I am a bit concerned about the safety.
From what it looks like on the site, some of the mods/clones...(wont claim all or most but at least some based on the photos) have some problems with lack of ventilation holes. Also personally a bit irked at the quality I have seen from these clones...but ok thats a choice.
Combined with "potentially" dangerous fake unprotected chemically safe batteries.
Combined with what could be subohm atties if not done correctly(or correctly pending the aim of user)

Especially when combined with.......an inexperience vapor, trying to cut corners and save a few bucks.

Could Potentially be a real safety hazard. Exploding batts can be a personal and fire hazard....and cases of such hurt all of us not to mention the person it happens to. Folks shouldnt get hurt vaping :(

NOW True all of those "risks" could so be found at an American re-seller at a higher price, least the bad to meh ones 0o.......but there seems to be a bit of a perfect storm going on at FT. IMO.


NOW...........back to the ECF stance at everyone. Do we think we could maybe move on from the FT fighting and help some Noobs out! :D
 
Last edited:

Ref Minor

Ultra Member
ECF Veteran
Verified Member
May 11, 2013
2,476
4,403
UK
Also check this link to know more about fasttech problems http://www.e-cigarette-forum.com/fo...every-post-about-shopping-china-fasttech.html

Need to mention that any administrator bloqued to add more comments on the above link to maybe hide something

Need to mention that any administrator bloqued to add more comments
15.gif

I am guessing you two are the multiple accounts of the same person
 

ia2828

Moved On
Dec 3, 2012
0
0
36
Malaysia
  • Deleted by UntamedRose

trouble1000

PV Master of Valinor
ECF Veteran
Verified Member
Mar 22, 2013
5,583
8,669
Rochdale, Lancs, GB
www.puffin-eliquid.com
This whole Fasttech thing has been discussed ad nauseum. Suggest reading this 3,000+ post thread:

The FastTech Thread For All FastTech Posts

All I can say is that I have twelve orders, received all twelve, and, so far, loved everything I've bought, and have twice as much gear because of it. Whether genuine or clone, the products I received have worked flawlessly, have been as described, and have been 1/3 to 1/2 the cost of other alternatives. Why people care where others buy their gear is beyond me. To each their own. But, mention Fasttech and the crazies on both sides come out. I strongly suggest reading about specific Fasttech products you are interested in the threads to see if they worked out ok. Most do, some don't. I can tell you that the Innokin, Kamry, Kanger, Nitecore, and Vamo products have met or exceeded my expectations. Some of the clones, including the mech mods, have been as good, and sometimes better than the originals. Some of the products, like the evods, have been great, but I needed to replace the coils. Many of the tanks are just generic to start with and have worked just fine. My orders have taken from 8 to 15 days from ordering to delivery, with an average of 11 days. They don't have many more things that I want from the site, but they are adding new things all the time. Some of the clones are 1/10 or better, the cost of the originals. Excellent way to find out what you like, without selling a kidney, to check out. In many ways, this is a very pragmatic approach to vaping. I was checking out a $60 nimbus at the vape shop yesterday, and I may get it. I can check out a clone on Fasttech for $5.50. I can always buy the real thing later if I like it, and I may do that. There are RBA's (clones), that sell for the price of a drip tip in the States. For the noob, it's hard to ignore these opportunities. I have purchased 11 APV's and mods from the site. I also purchase from US Vendors. Me likee! Really happy with my experience at Fasttech.

I will give my two cents about some of the arguments against Fasttech. My top ten list (I'm sure there are many more):

1. Buy American, China sucks: 90% of all vape gear is made in China, it's a question of price, and paying the middle man and distribution cost (multiply by four for the same product made in the US).

2. By selling below the MSRP, the genuine products are said to be "fake", when in fact they are the genuine article, but not selling at the suggested price fixing offer from the manufacturer.

3. Buy American: I do, much of my gear is not sold on Fasttech, including Sigelei, Provari, etc.

4. Shipping takes too long: Coming from Hong Kong does take a while. A legitimate tradeoff, with free shipping. Also, many items don't ship immediately, but those delays are clearly posted. This is a standard inventory control procedure and Fasttech let's you know in advance.

5. Warranty: Fasttech may have the best warranty of any company in the World. Certainly competitive. Many stories in the threads.

6. Customer Service: Fasttech may have at least as good as any company in the world. Certainly competitive. Many stories in the threads.

7. We should support our local and national vendors: I do, most of my gear is not sold by Fasttech. Their most expensive item is $75. All high end gear has to be purchased elsewhere. I buy or make all my own juice, though I've heard good things about Liqua and Hangsen. Dekang, a mixed reaction.

8. Their stuff is all knockoffs: Much of it is. In many cases, the knockoffs works equal to or better than the original. Caveat Emptor. Do your homework. Buying a brand name is a buying choice, not a requirement.

9. You're un-American: You're out of your mind. Open your eyes. You don't know me. Know thyself first.

10. Fasttech doesn't play by the rules: Sometimes the rules are unfair. I'm not only responsible for putting food on my family's table, but I'm not an idiot, and cannot afford to ignore bargains. I do buy products from Walmart (90% of which are made outside the US). Why do you even care?

Sorry for the rant OP, I'm just sick of hearing about the Fasttech bashers, and am posting my frustration here. Hopefully, some of it is useful to you. I'm sure that there are many Fasttech horror stories. You can get those from any company and I have my share of stories from US Vendors, and, surprisingly, none from Fasttech so far.

Legitimate Questions:

1. Why buy retail, when you can buy wholesale, with no minimum and no shipping cost?

2. Why pay the middleman a premium, plus shipping?

3. Why is my buying a product from Fasttech of concern to others?

4. If Fasttech delivers (eventually) what they advertise at discounted pricing, why is this not a viable consideration and option?

5. Why am I ranting so much? Probably because this is my last Fasttech post (maybe), and I wanted to cleanse and purge, and I haven't had a bad experience. So far, so good.

Anyway, my two cents in a wall of words. Do your homework, you'll be fine. There is no right or wrong decision, just a personal one. Good luck, Power up and Vape On!

As always Bill, you are the balanced voice of reason, in an otherwise unbalanced world.

I always look forward to your posts, precise and to the point :thumbs:
 

crxess

Grumpy Ole Man
ECF Veteran
Verified Member
Sep 20, 2012
24,438
46,126
71
Williamsport Md
Gotta love how people can come in and all but demand we do things their way and actually think we will not protect our basic right to choose for ourselves.
I have shopped more than 50 Venders from the U.S. and abroad in the past year.
Rule one - Research your purchase First.
Rule two - If you missed rule one, it is all on you.
Rule Three - always learn from Rule one AND rule Two - History Can Repeat itself.:D
 

Glen Snyder

Ultra Member
ECF Veteran
Verified Member
  • Deleted by sonicdsl
  • Reason: Unnecessary
Status
Not open for further replies.

Users who are viewing this thread