As of now I'm using an Igo-L with a small wick made of 500 mesh and 3 wraps of .3mmX.1mm Kanthal ribbon wire coming in at 1.3 ohms and it's working great minus the leaking of juice out of the airhole. I want to get a new rda that perhaps has an airhole a little less likely to leak, I know using silica or cotton would fix this but I swich flavors often and with the regular wick set ups I can't to that like I do just running a small peice of mesh. I don't mind just a single coil but I'm not against something that is intended for dual coil. Anyone with an idea of what rda is next for me I would love to hear/see it. Thank you guys for the help
- Status
I actually carry the igo l with me all day with no leaking. Like you said, I do use silica wick. It only leaks if I over drip which is why I carry that and not my age t2. When I change flavors I just vape it until the wick turns white then put my new flavor on. There is a very small taste of the previous juice for the first round of dripping then its gone.
I' m currently struggling to get the same flavor and vapor out of my AGA-T2, but I'm still running my first build on it so with time it may get better but it just isnt hitting the spot like the Igo is
Same as the Igo .3mmX.1mm ribbon I have some .8mmX.1mm coming in the mail to bring the number of wraps up and keep the resistance low enough to use on my magneto.
The T2 is set up with 3wraps also but coming in at 2.9ohms so I run it on my vamo for the time being but in 18650 mode it is huge
The T2 is set up with 3wraps also but coming in at 2.9ohms so I run it on my vamo for the time being but in 18650 mode it is huge
i use a 3/4 wrap of 28 gauge kanthal and its clocking in at .7 ohms. With my igo i have a dual coiled setup at .3 ohms with 28 gauge kanthal and 3mm silica with two loops. Both of them hit like a train and blow huge clouds. I'm not sure of a RDA that wouldn't leak with juice floating around in there though.
I prefer the ribbon wire because for me it is easier to wrap a decent coil. I'm trying to stay away from ohms that low since I'm still new to the whole rebuildable thing and my batteries couldn't handle that amperage and I'm more into the flavor than I am the huge clouds my Igo is doing fine but with the T2 if i run it on my magneto it barely looks like anything comes out and I'm using 80vg20pg juice so I know that it should be way better than that for gods sake right now my protank is doing better than the T2 I guess I just need to do a few more builds. Hopefully the new ribbon wire I have coming will help with that issue
You can spend lots more on a rebuildable atomizer, but you'll be hard pressed to find one better than the Igo-L. These are worth their weight in gold
I love my Igo-L just want something with an air hole a little higher then the one on the Igo-L to try and minimize the leaking I have due to the mesh set up I use
I've heard immortalizer's don't leak. Then there is always the rda's with adjustable air flow holes such as trident, omega, Helios. That you could turn the air flow off before putting in your pocket to avoid leaks.
- Status
Similar threads
- Locked
