Looking to move into Genesis style attys

[aPandaz]

Hello everyone. I've been vaping on an Ego Twist for a couple months now and have recently had the opportunity to try a GUS mod with a Cobra atty. It had the same juice I had in my carto tank and there is just no comparison. My question is, should I look for a mechanical mod or move to a hybrid type? I've been eyeing the Macaveli 350 and the Zenesis mini. I'm leaning towards the Macaveli. I like the small size of both since I'd like to take them out with me.

 

[jim829]

those hybrids are mighty sexy. I've been eyeballing the life out of those ihy's. I'm a cheap guy these days though, so i stay away from the hybrids. Do whatever your wallet will allow. I have quite a few genesis atties and two mechs, so i'm going to try and rein it in a little bit, but if you don't have a mechanical mod or a genesis, you might as well go hybrid. If you're planning on buying high end stuff, anyway.

I'd take a look at the ihybrids though if i were you. Some of those LE's are pretty awesome. Plus you get the 350 and 650 tube.

 

[dspin]

Hello everyone. I've been vaping on an Ego Twist for a couple months now and have recently had the opportunity to try a GUS mod with a Cobra atty. It had the same juice I had in my carto tank and there is just no comparison. My question is, should I look for a mechanical mod or move to a hybrid type? I've been eyeing the Macaveli 350 and the Zenesis mini. I'm leaning towards the Macaveli. I like the small size of both since I'd like to take them out with me.

Just REMEMBER - every genisis vapes differently depending on airhole, wick size , top cap dimensions, etc etc.


While Im thinking about it, I have 10 genisis attys and they stay at home because I wont carry them around upright so as not to have juice leak out.

 

[Thrasher]

there is a difference between hybrids and just a geni atty, the hybrid is non adjustable voltage and the atty does not come off. you have to adjust the resistance on the hybrid to get the vape you want, where as a straight geni can moved to any mod., just something to think about.

 

[albcig]

you might want to try a geni with a VV first. its easier to deal with all the problems the coil will give you

 

[jeffd]

Looking at a aga-t+ with glass tank here. Good luck with the gen.

 

[aPandaz]

I'd take a look at the ihybrids though if i were you. Some of those LE's are pretty awesome. Plus you get the 350 and 650 tube.

I took a look at the iHybrids, but I like the really clean lines of the Zen and Mac.

 

[aPandaz]

you might want to try a geni with a VV first. its easier to deal with all the problems the coil will give you

I was considering a provari and zen atty, but at the cost I figured I might as well get a Zenesis.

 

[aPandaz]

Just REMEMBER - every genisis vapes differently depending on airhole, wick size , top cap dimensions, etc etc.


While Im thinking about it, I have 10 genisis attys and they stay at home because I wont carry them around upright so as not to have juice leak out.

How much do the dimensions affect the vape flavor wise? I understand that the hole size can affect the draw and airyness of the vape.

 

[albcig]

yes, as much as i like my genesis they stay at home. genesis is not an all terrain type device.

 

[albcig]

I was considering a provari and zen atty, but at the cost I figured I might as well get a Zenesis.

zenesis is not a vv device. is just a mech mod

 

[Justin075]

I have 2 different Genesis devices, and they rarely get used simply because they leak. Also I've yet to find one without an "airy" draw. Plus when I get home I just don't feel like switching devices. Everyone is different though.

 

[aPandaz]

zenesis is not a vv device. is just a mech mod

I realize that. I was referring to the post that suggested I try a vv device and genesis atty. I'm still considering a vv device, possibly the provari with the ZAP.

 

[dspin]

How much do the dimensions affect the vape flavor wise? I understand that the hole size can affect the draw and airyness of the vape.[/QUO

Massive difference. The Zattys or Zenisis vape nothing at all like the Cobra that you tried. Totally different in flav and vapor.



Unless you are going to have several pvs you might want to consider what you are going to do on a hybrid when your coil goes or needs adjusted and you cant get it right.

Also for when you are re-coiling someday and nothing you do will go right that day.

That has happened to me twice now in the last yr.


IMO - better to have a genisis atty that can be replaced on the PV with another atty.

 

[dspin]

I have 2 different Genesis devices, and they rarely get used simply because they leak. Also I've yet to find one without an "airy" draw. Plus when I get home I just don't feel like switching devices. Everyone is different though.

The BliSS is a very tight draw to me - less than 1.0 mm airhole - acutally its too small for me, the flavor is way to strong that way for my personal taste. Im going to have to drill out the airholes

 

[SteveW]

Looking at a aga-t+ with glass tank here. Good luck with the gen.

A great choice and excellent value for a stainless steel atty.