Looking to switch PV's, any advice?

Status
Not open for further replies.

markfm

Aussie Pup Wrangler
ECF Veteran
Verified Member
Jul 9, 2010
15,268
45,866
Beautiful Baldwinsville (CNY)
Check vaporsetc (coupon code vapezone), litecigusa, liberty-flights (cc posted on their site), nhaler (saveinnj) for 2 ohm cartos.

If you are buying for the pt, though, get 2.8 - 3.2 ohm, not 2.

Concerning pt, make sure it is a real pt, not one with built-in battery, else you will not be getting a 5v vape.
 

X-Factor

Super Member
ECF Veteran
Feb 13, 2011
429
20
Pennsylvania
DEvin,

I bought a 5v passthrough and USB/wall plug at Madvapes to try 5 volt vaping. I get as much vapor on a 2 second inhale with that PT compared to a 5 second inhale on my Riva/eGO! It was @ $25 for the PT and plug. I carry it room to room in my house and use it while at home.

I just ordered an Infinity kit: Infinity
This mod is interesting to me in lotsa ways. I can choose between 3.7 volt vaping on up to 5 or 6 volts with a dial. It is regulated and that means the vape will be consistent until the battery dies- no more decrease in vapor as the battery is used for hours. It can use regular 510 attys and it won't blow them if I vape in the lower ranges. I think it's beautiful looking.

They also sell the "Buzz" mod there that is very popular with the ECF folks. It isn't as perty as the Infinty and it costs about the same. You need to adjust the voltage with a screwdriver though and that kinda made me nervous:)

Good luck in your search:)

Lori

Lori,
You have a 5v PT, but what is the rest of the set-up that you have connected to it? that is important.
 

Scottitude

Ultra Member
ECF Veteran
Verified Member
Aug 18, 2010
1,496
1,379
Metro Detroit
scottitude.net
going to be picking up a 5v passthrough, before I buy a 5v pv can anyone recommend a good place for 510 cartos?

I've been very satisfied with the price and performance of both the LR & SR Boge 510 Cartomizers from PureSmoker. You can get either resistance in Matte Black or Stainless Steel finish.

Description:
Components:
1 x Boge 510 Cartomizer (Sold Individually, $1.49 each)

Available In:
Low Resistance: 1.9 - 2.1 ohms (Best at 3.7v or below) [Should not be used on High Voltage Devices]
Standard Resistance: 2.9 - 3.1 ohms (Good at most all voltages)

Great cartos, great options, great deal!
 
Status
Not open for further replies.

Users who are viewing this thread