And I'm no longer capable of having grandbabies.They are all done.
Well DS's wife is tied, DD is able but says she'll have no more
So we only have two actual GD's ... the others are just adopted GKs
Hey OB, I see you
Lounging By The Beach - Part 8
- Thread starter 100%VG
- Start date
- th_trl_thread_readers 0
- Status
Well DS's wife is tied, DD is able but says she'll have no more
So we only have two actual GD's ... the others are just adopted GKs
Hey OB, I see you
Oh my goodness dear!! I meant a baby animal!
Well dang we could have had a baby shower!!!
So I'm in the pool. Got the jog over with and doing exercise stuff to music.
Was actually having fun. This was playing.
I was swinging and rotating the ole hips. Kicking the legs, doing arm stuff (out to the sides and up in the air).
And singing...well one has to work out the lungs.
Song got over so I setup to do this but without the noodle.
Basically you turn around as far as you can. I can go until I'm looking directly behind me.
Well I turn and there is the preacher and he started laughing from the look on my face!
And good afternoon beach!!
And I'm no longer capable of having grandbabies.
There is always the great great!
Oh gee ... thanks for the reminder OB!I been spending the morning paying September`s bills
Well dang we could have had a baby shower!!!
So I'm in the pool. Got the jog over with and doing exercise stuff to music.
Was actually having fun. This was playing.
I was swinging and rotating the ole hips. Kicking the legs, doing arm stuff (out to the sides and up in the air).
And singing...well one has to work out the lungs.
Song got over so I setup to do this but without the noodle.
Basically you turn around as far as you can. I can go until I'm looking directly behind me.
Well I turn and there is the preacher and he started laughing from the look on my face!
And good afternoon beach!!
Good afternoon JJ, how about I take a nap for you now?
Bwahahaha about the preacher
Oh gee ... thanks for the reminder OB!
Good afternoon JJ, how about I take a nap for you now?
Bwahahaha about the preacher
Talk about bad timing!
Then I had to talk to the man while
Only you JJ, could only happen to you!Talk about bad timing!
Then I had to talk to the man while
Your welcome Dale
I hate the first of the month
Oh well, it's good to get them outta the way tho'
Your welcome Dale
I hate the first of the month
I still can't believe it almost September. 8-o
Well that made me feel better.
Hi OB
You're welcome!! Off to try for a nap now, nice and cloudy
Yes it is I`m just thankful to the man upstairs to have a good job,health and work ethic to be able to pay themOh well, it's good to get them outta the way tho'
Oh well, it's good to get them outta the way tho'
Well the good thing is doing it online, it doesn't take that long. Misery cut short!
Dale enjoy your nap and OB have fun paying those bills.
I'm off to fix brunch because if I wait any longer it will be supper time.
I'm off to fix brunch because if I wait any longer it will be supper time.
Well the good thing is doing it online, it doesn't take that long. Misery cut short!
LOL I mail mine only because my wife works for the post office and I feel im cheating my house hold if I don`t
that`s just me
Good Morning, Beach Babes and Buddies.
I slept pretty darn good, too.
Good Afternoon, Teacup.
I wrapped 15 coils on a 7/64" drill bit for you yesterday. I used 29g with 9 wraps and they were coming in at 2.2Ω on my ZMax at first, but then they started jumping higher and lower at down to 2.0Ω and up to 2.3Ω, with one at 2.4Ω. That really threw me. One was at 2.1Ω, so I left it alone and added a wrap to two that were 2.0Ω, which brought them up to 2.3Ω. So they're all fairly close (except the 2.4Ω). These coils aren't as wide as I thought they might be, so they'll fit into either of the RDAs you told me about. I'll make some with 29g on a 3/32" drill bit and see how they come in. 11 wraps calculates to 2.167Ω, so I'll see what the ZMax reads for them. I'm also going to make some with 28g on both drill bit sizes and compare, but they will be wider and may only fit in the Patriot Foggy.
Since they aren't all coming in at precisely 2.2Ω, you may have to adjust the ProVari from 4.0V to 3.9V or 4.1V (or whatever). However, considering these are designed for the ProVari at 4.0V and your desired juice Wattage, you should also be able to use these coils and RDAs on a Mech.
Those free services of mine are piling up. What are you doing entertaining? You need to get to the casino and win big for me.
Good Afternoon, Glam.
Good Afternoon, OB.
You must have really been getting into it.
Good Afternoon, JJ.
Good morning Beach!
I had a wonderful nights sleep ... FINALLY!!
I slept pretty darn good, too.
Good Afternoon, Teacup.
I wrapped 15 coils on a 7/64" drill bit for you yesterday. I used 29g with 9 wraps and they were coming in at 2.2Ω on my ZMax at first, but then they started jumping higher and lower at down to 2.0Ω and up to 2.3Ω, with one at 2.4Ω. That really threw me. One was at 2.1Ω, so I left it alone and added a wrap to two that were 2.0Ω, which brought them up to 2.3Ω. So they're all fairly close (except the 2.4Ω). These coils aren't as wide as I thought they might be, so they'll fit into either of the RDAs you told me about. I'll make some with 29g on a 3/32" drill bit and see how they come in. 11 wraps calculates to 2.167Ω, so I'll see what the ZMax reads for them. I'm also going to make some with 28g on both drill bit sizes and compare, but they will be wider and may only fit in the Patriot Foggy.
Since they aren't all coming in at precisely 2.2Ω, you may have to adjust the ProVari from 4.0V to 3.9V or 4.1V (or whatever). However, considering these are designed for the ProVari at 4.0V and your desired juice Wattage, you should also be able to use these coils and RDAs on a Mech.
Good Morning, Beachers......happy you slept well, Dale. I did too...the dogs did not run or bark in the night. Must have been that whiskey I gave them right before bed, thanks to VG's suggestion.
Those free services of mine are piling up. What are you doing entertaining? You need to get to the casino and win big for me.
Good Afternoon, Glam.
Good Morning Dale and Glam
Good Afternoon, OB.
So I'm in the pool. Got the jog over with and doing exercise stuff to music.
Was actually having fun.
I was swinging and rotating the ole hips. Kicking the legs, doing arm stuff (out to the sides and up in the air).
And singing...well one has to work out the lungs.
Song got over so I setup to do this but without the noodle.
Basically you turn around as far as you can. I can go until I'm looking directly behind me.
Well I turn and there is the preacher and he started laughing from the look on my face!
And good afternoon beach!!
You must have really been getting into it.
Good Afternoon, JJ.
LOL I mail mine only because my wife works for the post office and I feel im cheating my house hold if I don`t
that`s just me
I mail mine too ... for different reasons tho'
No joy on the nap but at least I slept well last night
Good afternoon luvGood Morning, Beach Babes and Buddies.
I slept pretty darn good, too.
Good Afternoon, Teacup.
I wrapped 15 coils on a 7/64" drill bit for you yesterday. I used 29g with 9 wraps and they were coming in at 2.2Ω on my ZMax at first, but then they started jumping higher and lower at down to 2.0Ω and up to 2.3Ω, with one at 2.4Ω. That really threw me. One was at 2.1Ω, so I left it alone and added a wrap to two that were 2.0Ω, which brought them up to 2.3Ω. So they're all fairly close (except the 2.4Ω). These coils aren't as wide as I thought they might be, so they'll fit into either of the RDAs you told me about. I'll make some with 29g on a 3/32" drill bit and see how they come in. 11 wraps calculates to 2.167Ω, so I'll see what the ZMax reads for them. I'm also going to make some with 28g on both drill bit sizes and compare, but they will be wider and may only fit in the Patriot Foggy.
Since they aren't all coming in at precisely 2.2Ω, you may have to adjust the ProVari from 4.0V to 3.9V or 4.1V (or whatever). However, considering these are designed for the ProVari at 4.0V and your desired juice Wattage, you should also be able to use these coils and RDAs on a Mech.
Sounds good to me
Adjusting the ProVari is simple - Status
Similar threads
