Love this kanthal :D

[Tactix]

Finally got my 30g kanthal, I've been rebuilding my mini protank 2 coil heads for a few days now, and I've got quite a bit better, I just made a 1.2ohm perfect micro coil in about 5 minutes, which is counting the time to wick and get her burning I love rebuilding, I think I finally found my new hobby

 

[VHRB2014]

Right on Bud,
Its the original rebuildable, the Kanger ProTank,

May they never sell you another coil again, unless you need parts.

But of course once you get used to this, you`ll go on to kayfuns or orchids or lemos, and never ever want for a good vape.

 

[Ryedan]

Finally got my 30g kanthal, I've been rebuilding my mini protank 2 coil heads for a few days now, and I've got quite a bit better, I just made a 1.2ohm perfect micro coil in about 5 minutes, which is counting the time to wick and get her burning I love rebuilding, I think I finally found my new hobby

Rock on Tactix

 

[cocacola31173]

Finally got my 30g kanthal, I've been rebuilding my mini protank 2 coil heads for a few days now, and I've got quite a bit better, I just made a 1.2ohm perfect micro coil in about 5 minutes, which is counting the time to wick and get her burning I love rebuilding, I think I finally found my new hobby

How many wraps did you do? I am used to wrapping my Kayfuns with 28 guage and when I started playing with the Protank I got some 32 gauge. I hate it...way too flimsy. I ordered some 30 gauge but just wonder how many wraps to get around 1.5 to 1.6?

 

[Brandon David]

I used to do 5 wrap standard coils in 30g around a 2mm screwdriver for 1.x ohms in my protank.


Sent from my iPhone using Tapatalk

 

[Tactix]

I was using a precision screwdriver set and used the 2mm flathead, used 6 wraps with the 30g and it came out to be just under 1.5ohms at 1.46ohms on my multimeter. Now that I have my kayfun lite it's definitely easier and I love rebuilding even more so now

EDIT: I realized I was asked about the 1.2ohm coil head I made, it was using a 1mm screwdriver and was around 8-10 wraps, I can't remember for sure, I've been building a lot of coils with my new kayfun so everything is starting to mix together lol, I do remember it BARELY fit in the mini protank 2 coil head though.

EDIT 2: Scratch that, Just took the old coil head apart, it was a 2mm screwdriver I used and was 5 wraps for the 1.2ohm coil, was a snug fit though, I really don't like rebuilding the coil heads, compared to rebuilding on a deck now. SO many possibilities, and so many variations that it's just fun to try them all to see what works best for you

 

[englishmick]

Finally got my 30g kanthal, I've been rebuilding my mini protank 2 coil heads for a few days now, and I've got quite a bit better, I just made a 1.2ohm perfect micro coil in about 5 minutes, which is counting the time to wick and get her burning I love rebuilding, I think I finally found my new hobby

I started a few weeks ago, it's a lot of fun. And you can get a good vape with a mini that way. I started at 1.8 ohms, but when I accidentally made one at 1.2 it was really good so that's what I use now.

Lightning Vapes sell bags of replacement insulators. You can reuse them but they don't last forever. I killed several by clipping bits off the side when I was cutting the wire ends with nail clippers. A couple more the bottom rim tore off when I was pulling them out.

LV also sell complete replacement heads in packs of 10, pretty cheap. I haven't got any yet, they come disassembled and include everything except for the coil and wick.

I got a Lemo for Christmas but I'm still using the coil it came with.