LR 306 atties

[mwa102464]

These Atty's are not just used by drippers Vaperologist, they are used a great deal for Bottom feeder units as well, and currently some other mods that are under design, however you have a great point there and after putting some thought into this I agree with that 100%. Great Idea buddy

 

[Vaporologist]

Thanks for the info mwa. I didn't realize there is more to it than just dripping/dipping.

 

[VaporMadness]

Wetboxes make sense... carts are irrelevant for a different reason (than dripping/dipping), and canister vs exposed is irrevalent too... all that matters is flavor/vapor/th performance... and how effective the feed mechanism is with the atty.

Tell you what though... it hard for me to imagine a better atty than a 2 ohm 801... they just rock!

 

[teabagger]

Wetboxes make sense... carts are irrelevant for a different reason (than dripping/dipping), and canister vs exposed is irrevalent too... all that matters is flavor/vapor/th performance... and how effective the feed mechanism is with the atty.

Tell you what though... it hard for me to imagine a better atty than a 2 ohm 801... they just rock!

no imagination needed... just order the 306 and live the dream(apart from the already stated drip tip dilemma )

 

[Iken]

I wasn't aware that these were 2.2 ohm from the git go. Kinda wish i had started with that atty instead of the 401.

As a cart user, i'm not so interested in the exposed bridge attys anymore because the carts are soooo small on them, and the inner/outer design makes them more tedious to refill. Even the "jumbo" versions are itsy bitsy (smaller than a std 510 cart). At least that's the case with the M401 carts, maybe joye306's are different? Also there is the exposed bridge M601 atty that's bigger than the M401, but i got no data on their cart size either.

Is the newfound interest in 306's coming from drippers/dippers or does it include cart users too? Just curious.

Oh man, I remember the 401 design all too well. Back when I was in school for Microsoft. I ordered a 401 kit for the dean of the establishment. She finally got it and brought it in to show me. The cart was just laughable. Long story short, she got fed up and sent it back and never got a single reply back from the supplier. A very saddened experience and a potential customer lost forever.

Just looked up M601 and wow they are sure expensive! Retail speaking. They look very similar to the 306's design in terms of threading. Wonder if they're compatible....

Issac,

Here's the deal with the 306 Atty's in my honest opinion. First there needs to be a better designed drip tip then whats currently available on the market. There is a guy here on the ECF who makes blown glass drip tips and the glass is stronger then derlin so don't worry about it breaking, maybe if you drop it really really hard it might but this special glass fitted to the 306 in my opinion will solve the issue I am having with the 306 and that is the following, leaking, as we all know they leak out the bottom, they also burn so hot that they burn the juice if you overload it, next you get that plastic taste if you chain vape it because of the heat it produces but NO MORE WITH a custom BLOWN GLASS 306 DRIPPING TIP, PROBLEM SOLVED. I spoke to this guy and he is reopening shop soon and I am giving him a 306 to use as a templet to start making them, I will fill you guys in on this situation if your interested. I really like these DARN 306 Atty's, but we need to get it perfected by having the right tip on the market. Issac if you are interested PM me and I will hook you up of course.!!

Beautiful Mwa! Absolutely interested! Glass has always been a heavily desired component in vaping. Project Infinity was to be made of glass during the initial concepts. You have me thinking about the intense burning and mutating of liquid on the 1.5's. Maybe if we were to throw in some twist and turns and make it into a 2.0 style, it could work out for the better.

 

[VaporMadness]

Oh man, I remember the 401 design all too well. Back when I was in school for Microsoft. I ordered a 401 kit for the dean of the establishment. She finally got it and brought it in to show me. The cart was just laughable. Long story short, she got fed up and sent it back and never got a single reply back from the supplier. A very saddened experience and a potential customer lost forever.

Just looked up M601 and wow they are sure expensive! Retail speaking. They look very similar to the 306's design in terms of threading. Wonder if they're compatible...

I don't know for sure, but I think they (the M601s) have different threads, same as the can-style M301. I hadn't noticed the M601 being much more or less expensive than others, just that they're not carried by many vendors. A 510 to (m601|m301) adpapter is available from a canadian outfit (that shop is a little pricey in general), the attys themselves are also available from other smoore vendors at more usual prices. I've never tried these larger smoore attys (or the smaller joye306 for that matter). There's an eGo'ish with m601/m301 native threading now, i guess its made by smoore too?

 

[atavanhalen]

I do know that David from supert is working on a drip tip as well but it will probably be some time before it happens, but I have had no trouble with the ones on the market. I like the idea of having it come from the manufacture with the tube on it but doesnt that kind of defeat the purchase of having an exposed bridge.(I really like being able to see what is going on in there) My only other suggestion is one that I already made about having a higher resistance one so it will burn cooler on 6 to 8 volts. I only vape at HV so if that happens I will be truly happy.

 

[Iken]

I don't know for sure, but I think they (the M601s) have different threads, same as the can-style M301. I hadn't noticed the M601 being much more or less expensive than others, just that they're not carried by many vendors. A 510 to (m601|m301) adpapter is available from a canadian outfit (that shop is a little pricey in general), the attys themselves are also available from other smoore vendors at more usual prices. I've never tried these larger smoore attys (or the smaller joye306 for that matter). There's an eGo'ish with m601/m301 native threading now, i guess its made by smoore too?

Oh! yeah, I just did a quick search on the 601 at the time. Your totally right, if there are 510>601/301 then they have to be 2 totally different threadings. i see smoore has 2 different versions of the X power but the only difference seems to be size and mah rating (650-900mah) by going by the pictures, it does seems that these are 601 standard by the overall length of the unit's cone.

I do know that David from supert is working on a drip tip as well but it will probably be some time before it happens, but I have had no trouble with the ones on the market. I like the idea of having it come from the manufacture with the tube on it but doesnt that kind of defeat the purchase of having an exposed bridge. (I really like being able to see what is going on in there) My only other suggestion is one that I already made about having a higher resistance one so it will burn cooler on 6 to 8 volts. I only vape at HV so if that happens I will be truly happy.

Hey good buddy, Thoughts exactly well placed, maybe it preforms a bit differently? or it's just something "new" on the market. Ok here's what Im hearing about Boge's 306 atties, they're said to be slightly longer, but I'll get on with them tonight to find out more specific details. If you might know anyone that has a micrometer and a Joye 306 atom, can you grab some measurements for me? We'll get the HV306 made, but just need a little help

 

[atavanhalen]

Oh! yeah, I just did a quick search on the 601 at the time. Your totally right, if there are 510>601/301 then they have to be 2 totally different threadings. i see smoore has 2 different versions of the X power but the only difference seems to be size and mah rating (650-900mah) by going by the pictures, it does seems that these are 601 standard by the overall length of the unit's cone.


Hey good buddy, Thoughts exactly well placed, maybe it preforms a bit differently? or it's just something "new" on the market. Ok here's what Im hearing about Boge's 306 atties, they're said to be slightly longer, but I'll get on with them tonight to find out more specific details. If you might know anyone that has a micrometer and a Joye 306 atom, can you grab some measurements for me? We'll get the HV306 made, but just need a little help

Sorry Iken missed your post but here are the measurements on the joye 306. These should be pretty exact using a digital caliper.
Length from bottom to top of the mesh is 21.60mm
Length from bottom to top of the atty wwithout mesh and bridge is 17.25mm
and diameter of the tube that holds the coil is 7.7mm on the bottom and 7.6mm towards the top(closest to the coil)
Also, there is a little lip above the connector for the tip or cart to sit on and that has a diameter of 8.2mm.
The length of the connector only (brass part with the lip I mentioned is 5.2mm

Sorry about the delay in my response, hopefully I did not delay anything. Excited about hv 306's!

 

[mwa102464]

There will be Glass Drip tips for the 306 Attys coming to market soon

 

[Iken]

Sorry Iken missed your post but here are the measurements on the joye 306. These should be pretty exact using a digital caliper.
Length from bottom to top of the mesh is 21.60mm
Length from bottom to top of the atty wwithout mesh and bridge is 17.25mm
and diameter of the tube that holds the coil is 7.7mm on the bottom and 7.6mm towards the top(closest to the coil)
Also, there is a little lip above the connector for the tip or cart to sit on and that has a diameter of 8.2mm.
The length of the connector only (brass part with the lip I mentioned is 5.2mm

Sorry about the delay in my response, hopefully I did not delay anything. Excited about hv 306's!

Just Great! thank you! It did stall us a bit, but no worries. My partner in Boge has been feeling awfully ill for this past week. Thankfully, I been with an engineer discussing these 306's. It appears that they do make them slightly larger than the norm, but with these measurements we can officially proceed to make the exterior picture perfect. Thank you for the accurate readings!

There will be Glass Drip tips for the 306 Attys coming to market soon

You know, i heard about those a few weeks ago. Just can't remember from where. They're definitely going to be pretty killer.

 

[atavanhalen]

Just Great! thank you! It did stall us a bit, but no worries. My partner in Boge has been feeling awfully ill for this past week. Thankfully, I been with an engineer discussing these 306's. It appears that they do make them slightly larger than the norm, but with these measurements we can officially proceed to make the exterior picture perfect. Thank you for the accurate readings! .

Sorry everyone!!! It is my fault that these are not finished yet. lol jk. Hopefully your boge partner feels better soon. Thanks Iken

 

[Iken]

Sorry everyone!!! It is my fault that these are not finished yet. lol jk. Hopefully your boge partner feels better soon. Thanks Iken

See what you gone and did! Haha just kidding. You and me both!
Thank you for your wishes. She wasn't on last night either. This is getting really concerning. I swear she is one of the most kindest souls that i ever met.

 

[atavanhalen]

Bumpin this up so it stays on your mind!

 

[Dillinger]

They're out! I was notified by the Iken Newsletter. Gonna have to order some soon!

 

[atavanhalen]

They're out! I was notified by the Iken Newsletter. Gonna have to order some soon!

You scared the heck out of me! When you said they are out, I thought you meant that he was not gonna do them anymore, but just went to the site and saw a beautiful site. Finally, a higher resistance 306. I get a lot of spam, literally hundreds a day so I must haves missed the newsletter. I am placing my order tonight. I am pretty sure when people find out about these, they are gonna sell like hotcakes. If I am not mistaken, nobody carries 306 at ties with more than 2.0 resistance. Sorry rambling again, can you tell I am excited! Thanks for the heads up Dillinger!

 

[Iken]

LOL I'm sorry Van! and Thank you Dillinger!
306 HV and LR Atomizers are in!
Maybe a thread should be made instead lol

 

[atavanhalen]

LOL I'm sorry Van! and Thank you Dillinger!
306 HV and LR Atomizers are in!
Maybe a thread should be made instead lol

You took the words out of my mouth.
I think you should start a new thread or I can. Get the word out and IMO you will sell out in no time. Thanks Isaac ! Good stuff!

 

[Iken]

Either or would be great! I do have alot of catching up to on the forum. As I been so tied up in emails,testings and negotiations for the past few days. I just set up to have Drip tips, adapters and another new product coming.

 

[atavanhalen]

Either or would be great! I do have alot of catching up to on the forum. As I been so tied up in emails,testings and negotiations for the past few days. I just set up to have Drip tips, adapters and another new product coming.

Cool, if you do not get to it today then I will start a thread when I get home work this evening. Glad to see you are getting the 306 drip tips as well, I have a couple and they have worked well for me.