LR 306... wow
- Thread starter teabagger
- Start date
- th_trl_thread_readers 0
- Status
I agree. The LR306 are pretty sweet!!! I am really diggin the small size and the power they pack.
nice! so these have 510 threads, and will fit on an ego np right? what about a cone? because the bridge is expose, how do you drip with these or use em with carts?
yes they fit on 510 threads, no they wont really work with cone(maybe with a drip tip). and drip tip would be a plus.. I am using this one with empty cart that i pull off to drip on.
I was going through a real slump with enjoying vaping the last little while, and this was the cure i needed, it made all the flavors pop again. I find the vape a little hotter than the lr 510/901/801.. Makes me think cartomizer at 5v.
I was going through a real slump with enjoying vaping the last little while, and this was the cure i needed, it made all the flavors pop again. I find the vape a little hotter than the lr 510/901/801.. Makes me think cartomizer at 5v.
I use to think the same thing about the 306 until I started using a bottom feed box mod, it seems that they get so hot they are burning my juice and I'm also tasting the plastic from my drip tip, anybody else finding this, especially after it is broken in a bit, and with continuous vaping. if you pick up you pv and take a hit or two it's all good but vaping for like 10min mine are getting seriously hot and not tasting right with the drip tip plastic taste.??? anyone else.??
if the bridge is exposed like that where will the juice "pool" with this atty? I'm picturing it spill/leak out all over the place? unless that's what that black cone thing is for... also looks like ELP has them in stock again.. do they ship to Canada?
It doesn't work with a stock eGo. I had to modify my cone by cutting off about a half and inch to allow air flow and enough room to put my month on it. (Sounds dirty eh) And I use a drip tip like the ones from nHaler.
Thanks for the tip! which cone? the eGo cone or the one that is included with the atty? (that is a cone right??)
I already have a drip tip that I use on my eGo so I should be good to go eh?
As soon as CoV gets the drip-tips in stock I gotta get me a LR306. 
Guess I better pick one up for my modder too so I keep him happy. 
I think that's the cart in the picture not a cone. And the 510 drip-tip won't work because of the high bridge. The 306 drip-tip appears to fit on the outside where the 510 fits inside the atty.
Guess I better pick one up for my modder too so I keep him happy. I think that's the cart in the picture not a cone. And the 510 drip-tip won't work because of the high bridge. The 306 drip-tip appears to fit on the outside where the 510 fits inside the atty.
I just leave the cone off my ego when using my LR 306a atty. Works just fine.
Also, if anyone owns a BB mod, this atty was MADE for this.
Also, if anyone owns a BB mod, this atty was MADE for this.
So you think the juice tastes better with this atty, huh? I DIY and have been using a 401 to dip because of the high bridge. It makes it easier to test flavors. Has anyone dipped with the 306? I'm in the mood for something new!!
The LR 306 atty really burns juice up too fast for dipping to be really effective.
However, I haven't done it personally.
However, I haven't done it personally.
GoodDog had it right. A 510 drip tip will not work with the 306. You'll have to get a drip tip made for the 306. And the cone I cut down was the one that comes with the eGo and screws onto the eGo to cover the atty. You can also just take the cone of which works good but if you overdrip you'll get a little leakage on you.
I'll be doing a review of the 306 in the coming weeks.
I'll be doing a review of the 306 in the coming weeks.
If you dont have a drip tip, simply snip the top off a 510 atomizer cover, and you've a makeshift one right there.
I had to do that when mine went missing a short while.
I had to do that when mine went missing a short while.
As soon as CoV gets the drip-tips in stock I gotta get me a LR306.
I think that's the cart in the picture not a cone. And the 510 drip-tip won't work because of the high bridge. The 306 drip-tip appears to fit on the outside where the 510 fits inside the atty.
I thought these aren't compatible with carts?
I'll probably end up getting a drip tip for this then ... it certainly sounds like it's worth trying!
I lucked out on a sample trade, and thats how I got it.
I'm just glad it went to a good home.
I'm just glad it went to a good home.
- Status
