M401/2/3 'Mini Tank' mod

[thegrindre]

Hi guys,
I'm building an M401 'Tank' mod. Why? Because I love the slim design of the mini e-cigs and, I smoked two and a half to three packs or more of analogs a day and, I want my juice to last as long as one battery charge, or at least closer then it is now. My juice runs out before the battery is dead and, I 'suck' on my PV constantly all day long.

Here's what I've found out and have done so far.

1. Using a number 10 wire size drill bit, I drilled the bottom out of a M401 juice cup, drilling from the inside of the cup to keep the drill bit aligned even and straight.

2. After cleaning all this up with Isopropyl Alcohol, I then cut a thin 1/4" section of 1/4" shrink tubing to fasten two juice cups together. One good one and the one I drilled the bottom out of.
If you slip both juice cups over your drill bit, it will keep them perfectly aligned while you shrink the tubing.
I now have a double M401 juice cup. A mini Tank! LOL

Before I continue, has anybody else done this before? Am I wasting my time, here?

 

[Turbo]

I started w/ the M series, they use to make XL carts and they have cartos now too; can't remember the capacity but I think the XL carts were double the regular, but hey, you made one now.

 

[thegrindre]

I'm still not sure all this will work. I'd like to buy a few if I could find any rather then doing this mod. I'm having issues with the outside cart, now.

 

[thegrindre]

This project has been halted. I have found XL Carts for my M401.

Enjoy!

 

[slopes]

Happy vaping thegrindre. I love the M401. I used to use the carts and refilling etc - but now I rely on 'dip n tip'. If you have a 10ml juice bottle, whip out the nozzle part. The 401 atty fits snuggly into the bottle neck... then just turn the whole lot upside-down for a moment or two and the atty gets recharged with about a cigarette's worth of fresh vape. After a while, this routine just becomes a regular part of the vaping process. It also means you can strip out all the fluff and stuff from the filter and even cut around a half of it off (if getting an even shorter ecig is your thing).

 

[Turbo]

I was just about to suggest checking out 'slopes' 401 mods and he appears...lol

But do check them out, he has some cool 401 mods here in the modding section.

 

[thegrindre]

Happy vaping thegrindre. I love the M401. I used to use the carts and refilling etc - but now I rely on 'dip n tip'. If you have a 10ml juice bottle, whip out the nozzle part. The 401 atty fits snuggly into the bottle neck... then just turn the whole lot upside-down for a moment or two and the atty gets recharged with about a cigarette's worth of fresh vape. After a while, this routine just becomes a regular part of the vaping process. It also means you can strip out all the fluff and stuff from the filter and even cut around a half of it off (if getting an even shorter ecig is your thing).

This is quite funny. Talk about a fix. LOL
My issue is that I suck on my PV all day long constantly. What I really need is a battery a foot or two long and a gravity feed juice bottle mod.
That would fix me up just peachy.

I'll look into Slopes stuff.

Thanks, guys,