MAD ecig problems im a noob

[Tsain94]

Hey y'all I just started vaping about a week ago I have an ego battery and a Kanger T32 clearo and I LOVE everything about it except for my lack of knowledge on e cigs ..
So I have a few problems
1: I'm always getting e liquid in my mouth
2: sometimes an air bubble or two will rise inside my tank
3: e liquid leaks into my battery, I have to take off my clearomizer and clean the liquid out of my battery if I don't my e cig will semi gurgle and when I try to take a drag there is a lot more air resistance and that's when I start getting liquid in my mouth
4.my battery gets really hot when I vape and I take really long drags because I like a nice thick vapor so I also would like some tips on what kind of clearo or carto to get to meet my thickness needs!

This being said I need a lot of help it would be very much appreciated!!

 

[Mrdaputer]

I think you are drawing too hard and getting juice in your mouth. Make sure your connections are snug. You might try to change your wick. If you know that you like to vape and don't mind spending a little money with out breaking the bank. A new aerotank with the new v2 airflow Kanger Aerotank V2 - 101 Vape on a MVP2 battery Innokin iTaste MVP V2.0 - 101 Vape Or where ever you want to buy it will up your game.

 

[EBates]

Hey y'all I just started vaping about a week ago I have an ego battery and a Kanger T32 clearo and I LOVE everything about it except for my lack of knowledge on e cigs ..
So I have a few problems
1: I'm always getting e liquid in my mouth
Your tank is flooding. Replace the Atomizer head and take slow smooth draws.
2: sometimes an air bubble or two will rise inside my tank
This is normal. When juice is provides to the wick/coil of the atomizer air bubbles are released.
3: e liquid leaks into my battery, I have to take off my clearomizer and clean the liquid out of my battery if I don't my e cig will semi gurgle and when I try to take a drag there is a lot more air resistance and that's when I start getting liquid in my mouth
See item #1 above
4.my battery gets really hot when I vape and I take really long drags because I like a nice thick vapor so I also would like some tips on what kind of clearo or carto to get to meet my thickness needs!
This is very likely a result of flooding as well.

This being said I need a lot of help it would be very much appreciated!!

See Mrdaputer's hardware recommendation.

 

[Lurch]

Sometimes when people make the switch from cigarettes to e-cig, or vaping, they have a tendency to draw too hard.

I would recommend you read the information contained in this post, hopefully it can be of help to you

http://www.e-cigarette-forum.com/forum/ecf-library/337017-inhalation-technique-e-cigarette.html

Good luck and I hope you find answers to help you.

 

[Baditude]

1: I'm always getting e liquid in my mouth

As stated above, you are drawing too hard on your tank. This is not smoking, and requires a different draw technique. Use a longer, gentler draw.

Clearomizers use tiny silica string to wick juice to tiny coils. If you pull too much juice to the coil, the coil is unable to vaporize all of the liquid. The unvaporized liquid has no where to go except in the air chamber, which leads to the gurgling/juice in the mouth/juice on the battery connector.

Adjust your vape technique. If you get flooding, remove the tank and blow through the air tube into a paper towel. In extreme cases you may need to remove the coil from the tank and dry it out with a paper towel. In even more extreme cases you may need to replace the coil head altogether.

2: sometimes an air bubble or two will rise inside my tank

This is normal. It shows that the wicks are wicking the e-liquid.

3: e liquid leaks into my battery, I have to take off my clearomizer and clean the liquid out of my battery if I don't my e cig will semi gurgle and when I try to take a drag there is a lot more air resistance and that's when I start getting liquid in my mouth

See answer number one.

It's important to keep the top battery connector free of e-liquid. It can cause corrosion of the metal and affect conductivity with the tank or charger. Use a paper towel or tissue; if the liquid has dried, use rubbing alcohol on a Q-tip.

4.my battery gets really hot when I vape and I take really long drags because I like a nice thick vapor so I also would like some tips on what kind of clearo or carto to get to meet my thickness needs!

A battery should never get warm or hot, only the tank which has the heating element in it.

As above, you need to change your vaping technique.

To get the thickness & vapor you describe you will need to advance up to rebuildable drip atomizers and a mechanical mod where you will learn to wrap your own coils and make your own wicks. This is advanced vaping and requires some research on your part.

Information Resources for Your First RBA

Mechanical Mod Safe Useage Guide

 

[Tsain94]

Thanks for te feedback guys I actually went out yesterday and got myself a pro tank 2 mini with an e-go t battery and it's hitting better than ever! I love it! and I think i may have been pulling a little too hard on the T32 that's exactly what te guys at my local vape store told me BUT I have had no problems with the pro tank 2 I love it! Thanks guys you're all awesome!!