Mad Murdock's radiator Pluid

[MaxPerilous]

I cannot say enough about the completely different taste I get out of this juice using the Twisted Wire Coil vs the Single wire coil. OMG!! The Licorice taste is slightly less prevalent but still good ans strong but the other flavors are coming out a Lot Better. Amazing how something as simple as the coil configuration can have such a drastic effect on the flavor of a juice.

Nate aka Darth Vapor

I'm gonna have to try these twisted coild everyone is raving about. Does it work also with 30g? I've also noticed flavor differances depending on the mesh used. I prefer the #500 not only for the better wicking with a solid wick but also imo has much better flavor than the others I've used.

 

[WNCmotard]

Go to walmart and ask for a free oral syringe. 10ml syringe will make 3 tnks for your ChiD.

Pic of MY ChiD with a tank made of syringe. Been using pluid in it for weeks with not an issue 1.

View attachment 144780

A tip for cutting those syringe tanks, find a socket that just fits in there for something solid to cut against, and use a metal tubing cutter for a nice precise cut.

 

[TechJ]

I've got three sheets of 500 mesh on the way. Hopefully it will be able to keep up with my high wattage habit.

 

[Katfeesh]

Well I found a tank buried in my Vape box. Filled with pluid this morning dang thing already cracked.

 

[MrKV]

I've got three sheets of 500 mesh on the way. Hopefully it will be able to keep up with my high wattage habit.

Youll be fine, ss mesh has a pretty good life span compared to the coil. Just give it a cleaning and change the coil when it comes time and youre good to go.

 

[TechJ]

I meant the wicking action. Nothing like vaping a wick dry....nasty.

 

[MaxPerilous]

A tip for cutting those syringe tanks, find a socket that just fits in there for something solid to cut against, and use a metal tubing cutter for a nice precise cut.

Yeah I forgot to mention that. It makes such a clean cut there really is no better way to do it. Thanks for reminding me about that and mentioning it. lol

I got my cutter from harbor freight for really cheap. Just take your time and cut slowly or it can walk a lil bit and you wont get a tru cut.

 

[Murdock Ruml]

Just mixed up some 710. Gonna send out some to my vendors so they can send out samples.

 

[Flapenn]

Just mixed up some 710. Gonna send out some to my vendors so they can send out samples.

Gunna send me a sample?


Sent by Jedi mind tricks.

 

[Devonmoonshire]

I'm gonna have to try these twisted coild everyone is raving about. Does it work also with 30g? I've also noticed flavor differances depending on the mesh used. I prefer the #500 not only for the better wicking with a solid wick but also imo has much better flavor than the others I've used.

With 30 AWG you will have to have quite a few coils to make it safe to vape. I normally use 30 AWG for single wire coils. When I twist them it is always 32 or higher because anything lower than that gauge takes too many wraps to get above 0.7 Ohms. Right now I used 32 AWG twisted very tightly together and it took me a 5/6 wrap to get to 1.3 ohms.

Hope this helps;
Nate aka Darth Vapor

 

[Flapenn]

Sent by Jedi mind tricks.

 

[Flapenn]

So much pluid...I'm a happy guy


Sent by Jedi mind tricks.

 

[MaxPerilous]

Sent by Jedi mind tricks.

THAT is a really good lookin pic!

 

[Murdock Ruml]

THAT is a really good lookin pic!

Yeah, I hope he knows that I am laying claim on it.

 

[MaxPerilous]

Yeah, I hope he knows that I am laying claim on it.

I already made it my desktop wallpaper lol.

 

[TechJ]

I agree that pic turned out well.

 

[DarklyNoon]

Go to walmart and ask for a free oral syringe. 10ml syringe will make 3 tnks for your ChiD.

Pic of MY ChiD with a tank made of syringe. Been using pluid in it for weeks with not an issue 1.

View attachment 144780

I had read that Pluid cracks polypropylene so I had written this off. Good to know it does work, I have an old 10ml syringe somewhere around here.

I'm gonna have to try these twisted coild everyone is raving about. Does it work also with 30g? I've also noticed flavor differances depending on the mesh used. I prefer the #500 not only for the better wicking with a solid wick but also imo has much better flavor than the others I've used.

I'm wondering if it works with 32g myself.

A tip for cutting those syringe tanks, find a socket that just fits in there for something solid to cut against, and use a metal tubing cutter for a nice precise cut.

This is a good piece of info, how much $$ do those tube cutters run?

I've got three sheets of 500 mesh on the way. Hopefully it will be able to keep up with my high wattage habit.

Still looking for a stateside vendor of 500 mesh at a reasonable price.

 

[TechJ]

I bought mine from the mesh company. Not a stateside manufacturer. Runs about 16$ for an 8"x12" sheet. Plus they throwing a free sheet of 300 or 400 for each sheet you purchase.

 

[MaxPerilous]

Yeah I use themeshcompany as well. They have good prices, fast shipping, and you can't beat a free sheet of mesh sometimes even multiple free sheets. I think I paid like $5 for my tube cutter at harbor freight? Pretty inexpensive and only a couple $'s more from like home depot.

 

[Murdock Ruml]

I bought mine from the mesh company. Not a stateside manufacturer. Runs about 16$ for an 8"x12" sheet. Plus they throwing a free sheet of 300 or 400 for each sheet you purchase.

Pretty quick shipping to Alaska too. Mine took a little over a week from the UK.