" mAhmba " concept PV

[DC2]

Seriously, I'd kick in to help get something like this off the ground.
But I'm guessing the people currently offering already have enough resources to get things rolling.

So just let us all know when we can buy one!!

 

[Kutterk]

Danm that´s wicked , is it in produktion ??

 

[Snarkyone]

Years ago I was a supervisor in a plastic injection molding shop. I can tell you first hand that you are looking at a tidy sum of money just for the molds alone! Molds are what the hot plastic is injected into and formed, they are the heart of the plastic injection shops. If you don't have a mold all that you have is a pile of melted plastic. That will be your biggest cost upfront. The initial run will cost quite a few thousand dollars as well since you are paying for the material, the employess running the presses, and other minor expenses. So the first step would be to find a mold design firm to make the mold, you can get a ballpark figure for what that would cost by doing some research and making some inquiries but I would not expect anything less than around 8-10k for the mold if not more, I think that might be on the low side, the only thing that helps to keep cost down is the size of the mold. Depending on how you go with it where the mold presses out one single unit (relatively small so cheap) or multiple units in one injection (bigger so it cost more to make). Personally I would gladly pay good money for one of these, they are a smart design. I think the only thing that would do a better job of dispersing the liquid would be a fuel injector like in automobile engines, I think that is the perfect device for injecting juice into the atomizer.

 

[ApOsTle51]

I'm still suprised that no manufacturer has contacted Tinear to get these in production. ( unless they have already of course). These would be the top selling mod on the market no doubt about that.

It has everything us vapers would need in an all-in-one PV.

 

[Bandit]

Make it in metal (plastic sucks and is one of the top reasons JS haters hate the JS), make in a sleeker profile to be easier to carry... and you've got a winner.

 

[Wheatfield]

very nice once again!

 

[rico]

where is tinear ,can i buy this mod .?i want all in one this is the best way !

 

[tinear]

Make it in metal (plastic sucks and is one of the top reasons JS haters hate the JS), make in a sleeker profile to be easier to carry... and you've got a winner.

hey, have at it.

i can't say as i follow up what Janty does anymore, ever since their whole "Cameo" promotion BS tactic ~ "hmm, i've an idea! let's promote the crap out of a product that we don't have, set a release date that we have no intention of keeping, after which we'll collect marketing feedback based on a couple of cr*ppy CAD renderings for our non-existant device to see if we still want to make it."

sounds like a plan to me

all this after i'm told (by Janty) they have no interest in my SideWinder because they have a similar product in the works. what a joke.

i'd love to make it in either cast or extruded aluminum, but i'm afraid presently i don't have the resources at my disposal. Alcoa i'm not.

where is tinear ,can i buy this mod .?i want all in one this is the best way !

i'm afraid there are no plans for production of this particular unit at this time, hence "concept". i trully appreciate your enthusiastic interest, though. thank you.

 

[ApOsTle51]

he's alive ...hehe .

I'm all for metal devices but i do like the "sony" look of black PVC..ohh missus!!

 

[franklyspeaking]

I wouldn't care if it were whittled from wood, if it worked, I'd buy it. It is the most forward thinking device design out there. I am surprised job offers haven't been made, much less contracts for production. I'll play the lotto tonight and if I hit the numbers we'll talk!!

 

[moog]

This is really a great "concept"...very nice

 

[Bandit]

I totally get where you're coming from tinear, please don't take that as a slight against what YOU'VE created... I was simply adding my thoughts to anyone who might take this and mass-produce it.

I hope we see this hit the big time honestly, I love the concept!!

 

[KonaNeil]

...i'd love to make it in either cast or extruded aluminum, but i'm afraid presently i don't have the resources at my disposal. Alcoa i'm not.

i'm afraid there are no plans for production of this particular unit at this time, hence "concept". i trully appreciate your enthusiastic interest, though. thank you.

Tooling for extrusions of the small diameter of the two chambers would not be that expensive. While I have decades of experience designing with aluminum extrusions ( believe I sent you a link when I offered to help you), I know nothing of casting. For the rest I'd probably cut from billet and refine with CNC. It would feel substantial in the hand like a fine watch and could likely save your life in a bar fight. The finished product wouldn't be cheap but could be done in fairly small quantities.

If the classic Les Pauls behind you in one of your videos are real, they could probably finance the project.

 

[tinear]

....please don't take that as a slight...

i see no slight implied nor is one taken. i don't think there is anything in existence that i myself couldn't look at and think of some if even minor change that would suit my personal preferences better, excepting, of course, for my wife ~ who's habit of looking over my shoulder at whatever i'm doing i find very endearing......

If the classic Les Pauls behind you in one of your videos are real, they could probably finance the project.

8-o

ack! take the kids!!... alright, i don't have any kids.... take the wife!!

 

[TnA]

8-o

ack! take the kids!!... alright, i don't have any kids.... take the wife!!

LOL....tinear, I'm just glad to see you're still around, still vaping away, and still tinkering when you have the time. Had to re-read this entire post to see what I'd missed since the start of this thread!

 

[rico]

tinear,i hope all user in this forum help you with 5 dollar or with his idear ,then we can bring this great product for all e-smoker they want all in one mobile e-smoking !janty make not good products they make mp3 and usb and other crazy things in his e-cig but we dont want this we want longtime comfortable smoke ,and you have this design,i dont no why all 15000 user they see this posting from tinear not see the reight way ,all other e-cig is not the future this is the best way and when we have a temperaturregulation for special liquids then we have not health-risk!

 

[rico]

15866 user see and read this posting from tinear ,this is the best modder why all user nott help for tinear ????????????????????????????All people say bla bla bla and sell other bad e-cig and see not this revoultion design ,this is very very crazy ,

when i see that many user say ohhhh the new janty with mp3 or usb is good, then i say this is crazy ,what you want e-smoking comfortable and mobile or want you hear music ????


The other big piont is we have not in e-smoking a temperaturregulation and a new atomizer modell ,we want a liquid that has not health-risk in high temperature ,why we have not a temperatureregulation in e-cig`s ?????

 

[blacksheepfoto]

I am still in awe at the precision in which you crafted this by hand. Seriously, I'm drooling.

 

[blacksheepfoto]

Any way to point in the right direction on using PVC for such prototyping/modeling work?

 

[dubnluvn]

Just thought I'd throw this out there...

PolyJet: High Resolution Concept Models utilizing high precision 3D printing by Solid Concepts

http://www.alphaprototypes.com/default.aspx

One off and small run plastic prototypes can be made very cheaply and precisely with polyjet technology. I gave them a call this morning and, depending on size and complexity of the design, prototypes can be made for as little as $200. Might be worth it to check it out.